Photoinduced electron transfer on aqueous carbon nanohorn-pyrene-tetrathiafulvalene architectures

Water-soluble carbon-nanohorn-tetrathiafulvalene (CNH-TTF) nanoensembles were prepared by utilizing positively charged pyrene as an assembly medium and characterized by spectroscopy and electron microscopy. Electronic interactions within the nanoensemble were probed by optical spectroscopy, indicating electron transfer between the TTF units and CNHs after light illumination.     

Gummic acid stabilized γ-Fe2O3 aqueous suspensions for biomedical applications

Biomedical applications of magnetic nanoparticles depend critically on their preparation as aqueous colloidal suspensions, or ferrofluids, with long term stability under physiological conditions. Dispersion of the magnetic nanoparticles is generally achieved by the use of protein cages, polysaccharide, polypeptide and charged macromolecular coatings, which minimize interparticle magnetic interactions, particle agglomeration and precipitation. The synthesis and characterization of gummic-acid stabilized maghemite ferrofluids is reported. X-ray diffraction, transmission electron microscope and dynamic light scattering measurements give a γ-Fe₂O₃ magnetic core diameter of 8 nm and a nanocomposite particle hydrodynamic diameter of 50 nm. Mössbauer and magnetization measurements indicate the presence of isolated, sterically stabilized superparamagnetic nanoparticles resistant to aging, and thus, promising agents for the production of novel magneto-pharmaceuticals.     

Structural, static and dynamic magnetic properties of dextran coated γ-Fe(2)O(3) nanoparticles studied by (57)Fe NMR, M?ssbauer, TEM and magnetization measurements

The structural and magnetic properties and spin dynamics of dextran coated and uncoated γ-Fe(2)O(3) (maghemite) nanoparticles have been investigated using high resolution transmission electron microscopy (HRTEM), (57)Fe nuclear magnetic resonance (NMR), M?ssbauer spectroscopy and dc magnetization measurements. The HRTEM observations indicated a well-crystallized system of ellipsoid-shaped nanoparticles, with an average size of 10 nm. The combined M?ssbauer and magnetic study suggested the existence of significant interparticle interactions not only in the uncoated but also in the dextran coated nanoparticle assemblies. The zero-field NMR spectra of the nanoparticles at low temperatures are very similar to those of the bulk material, indicating the same hyperfine field values at saturation in accord with the performed M?ssbauer measurements. The T(2) NMR spin-spin relaxation time of the nanoparticles has also been measured as a function of temperature and found to be two orders of magnitude shorter than that of the bulk material. It is shown that the thermal fluctuations in the longitudinal magnetization of the nanoparticles in the low temperature limit may account for the shortening and the temperature dependence of the T(2) relaxation time. Thus, the low temperature NMR results are in accord with the mechanism of collective magnetic excitations, due to the precession of the magnetization around the easy direction of the magnetization at an energy minimum, a mechanism originally proposed to interpret M?ssbauer experiments in magnetic nanoparticles. The effect of the surface spins on the NMR relaxation mechanisms is also discussed.     

DSC analysis of Cu–Zn–Sn shape memory alloy fabricated via electrodeposition route

Cu–Zn–Sn shape memory alloy strips with composition range of 13.70–46.30 mass% Sn were fabricated by electrodepositing Sn on a shim brass surface and then subsequently annealed at a constant temperature of 400 °C for 120 min under flowing nitrogen. Subjecting the Sn-plated strips to differential scanning calorimetry (DSC) analysis revealed that the austenitic start (A _s) temperature was essentially constant at 225 °C while the martensite start (M _s) temperature was consistently within the 221.5–222 °C interval. Austenite to martensite phase transformation showed two distinct peaks on the DSC thermogram which can be attributed to the non-homogeneity of the bulk Cu–Zn–Sn ternary alloy. The latent heats of cooling and heating were found to increase with the mass% Sn plated on the shim brass. Effect of annealing temperature was also investigated wherein strips with an essentially constant composition of 26 mass% Sn were annealed at a temperature range of 350–420 °C for 120 min under flowing nitrogen. Varying the annealing temperature has no significant effect on the transformation temperatures of the ternary alloy.     

Measurement of differences between J/psi and psi(') suppression in p-A collisions

Measurements of the suppression of the yield per nucleon of J/psi and psi(') production for 800 GeV/ c protons incident on heavy nuclear targets, relative to light nuclear targets, have been made with very broad coverage in x(F) and p(T). The observed suppression is smallest at x(F) values of 0.25 and below, and increases at larger values of x(F). It is also strongest at small p(T). Substantial differences between psi(') and J/psi production are observed for the first time in p-A collisions. The suppression for psi(') production is stronger than that for J/psi for x(F) near zero, but becomes comparable to that for J/psi for x(F)>0.6.     

Attachment of Pseudomonas putida onto differently structured kaolinite minerals: a combined ATR-FTIR and 1H NMR study

The attachment of Pseudomonas (P.) putida onto well (KGa-1) and poorly (KGa-2) crystallized kaolinite was investigated in this study. Batch experiments were carried out to determine the attachment isotherms of P. putida onto both types of kaolinite particles. The attachment process of P. putida onto KGa-1 and KGa-2 was adequately described by a Langmuir isotherm. Attenuated Total Reflection Fourier Transform Infrared Spectroscopy and Nuclear Magnetic Resonance were employed to study the attachment mechanisms of P. putida. Experimental results indicated that KGa-2 presented higher affinity and attachment capacity than KGa-1. It was shown that electrostatic interactions and clay mineral structural disorders can influence the attachment capacity of clay mineral particles.     

Morphology, ionic diffusion and applicability of novel polymer gel electrolytes with LiI/I2

Novel polymer gel electrolytes have been prepared by incorporating LiI-I(2) solutions into a polyethylene oxide matrix supported by a TiO(2) filler. The gel electrolytes, based on either acetonitrile or propylene carbonate solvents are compared with liquid standard ones and are examined by (7)Li solid state nuclear magnetic resonance relaxometry and diffusion measurements. In parallel, the triiodide apparent diffusion coefficient has been determined by linear sweep voltammetry. The results are correlated with atomic force microscopic images of the electrolytes and give insight of the dynamic properties of the ions in the constrained polymer medium. Furthermore, the dissociation of the ions is estimated by relating the ionic conductivity to the ionic diffusion. As a prime application, the polymer gel electrolytes were incorporated in dye sensitized solar cells and the measured energy conversion efficiencies were successfully correlated with their morphological, diffusive and conducting properties.