Separation and characterisation of sphingoceramides by high-performance liquid chromatography-electrospray ionisation mass spectrometry

We developed a simple and reliable analytical method for the quantification and the characterization of ceramides extracted from biological samples by high-performance liquid chromatography (HPLC) coupled to electrospray ionisation tandem mass spectrometry (ESI/MS/MS). The chromatographic separation of analytes was carried out in a RP8 column, eluting with a methanol-water mixture in gradient elution mode. The separated lipids were detected by total ion monitoring and characterised by MS/MS spectra; quantitative analysis was performed by integrating the extracted ion peaks obtained in the negative ion mode. Good repeatability was obtained for retention time (0.3-2%), peak area ratio (A(S)/A(IS), 2-8%), as well as limit of detection (LOD, 5-26 pg) and quantification (LOQ, 13-53 pg). The method was validated for the analysis of N-palmitoyl-D-erythro-sphingosine (Cer16), N-stearoyl-D-erythro-sphingosine (Cer18), N-tetracosanoyl-D-erythro-sphingosine (N24:0, lignoceric ceramide, Cer24:0), and N-tetracos-15'-enoyl-D-erythro-sphingosine (N24:1, nervonic ceramide, Cer24:1), giving good results. Lipid mixtures, extracted from skin and epidermal cells, were analysed for their content of the studied ceramides.     

Elucidating interactions of ionic liquids with polymer films using confocal Raman spectroscopy

We report on the molecular interactions between room-temperature ionic liquids (RTILs) and Nafion and PDMS membranes, proving that in contact with these polymers RTILs behave like electrolytes rather than solvents.     

Regioselective homogeneous hydrogenation of heteroaromatic nitrogen compounds by use of [RuH(CO)(NCMe)2(PPh3)2]BF4 as the precatalyst

Summary The complex [RuH(CO)(NCMe)₂(PPh₃)₂]BF₄ (1) is an efficient and regioselective catalyst precursor for the hydrogenation of polyaromatic nitrogen compounds such as quinoline (Q), isoquinoline (iQ), indole (ln), 5,6- and 7,8-benzoquinoline (BQ) and acridine (A) under relatively mild reaction conditions (125 °C, 4 atm H₂). The order of individual initial rates was: A > Q > 5,6-BQ > 7,8-BQ > ln > iQ, reflecting both steric and electronic effects. For the regioselective homogeneous hydrogenation of A to 9,10-dihydroacridine (DHA) catalysed by complex (1), a kinetic study was carried out; the experimentally determined rate law was r = k ₁ [Ru] [H₂]. These findings are consistent with a mechanism involving the hydrogenation of [RuH(CO)(A)(NCMe)(PPh₃)₂]BF₄ to yield DHA and the unsaturated species [RuH(CO)(NCMe)(PPh₃)₂]BF₄ in the rate-determining step.     

Structural researches on metal complexes with ligands containing the pyridoxal moiety: X-ray structure of chloro(N-pyridoxylidene-N′-salicyloylhydrazinato) copper(II) Monohydrate

Summary The x-ray crystal structure of the title complex is described Crystals are monoclinic, space groupP2₁/n, with unit-cell dimensions:a=18.070(2),b=13.471(2),c=6.788(2) Å,=94.70(1),Z=4. The structure was solved from diffractometer data by Patterson and Fourier methods and refined by least-squares techniques toR=5.0% for 2451 independent reflections. It consists of complex molecules, in which the copper atom square planar coordination comprises the chlorine atom, Cu-Cl=2.240(3) Å, and the organic ligand which acts as terdentate through the oxygen atom [Cu-O=1.948(3) Å] and a nitrogen atom, [Cu-N=1.933(5) Å] from the hydrazidic chain and the oxygen atom, [Cu-O = 1.894(4) Å] from the pyridoxal group.     

Isostructural self-assembled monolayers. 2. Methyl 1-(3-mercaptopropyl)-oligo(ethylene oxide)s

The structural order and ordering conditions of the self-assembled monolayers (SAMs) of HSCH2CH2CH2O(EO)xCH3, where EO = CH2CH2O and x = 3-9, on polycrystalline gold (Au) were determined by reflection-absorption infrared spectroscopy (RAIRS), spectroscopic ellipsometry (SE), and electrochemical impedance spectroscopy. For x = 5-7, RAIRS and SE data show that the oligo(ethylene oxide) [OEO] segments adopt the near single phase, 7/2 helical conformation of the folded-chain crystal polymorph of crystalline poly(ethylene oxide), oriented normal to the substrate. These SAMs exhibit OEO segment structure and orientation identical to that found in a previous isostructural series [HS(CH2CH2O)6-8C18H37 SAMs. Vanderah, D. J., et al. Langmuir 2003, 19, 3752] and are anisotropic films for surface science metrology where structure is constant and thickness increases in 0.30 nm increments. In addition, this is the first example of OEO SAMs to attain this highly ordered, helical conformation where the (EO)x segment is separated from the Au-sulfur headgroup by a polymethylene chain. For x = 4, 8, and 9, the SAMs are largely helical but show evidence of nonhelical conformations and establish the upper and lower limits of the isostructural set. For x = 3, the SAMs are largely disordered containing some all-trans conformation. SAM order as a function of immersion time from 100% water and 95% ethanol indicates that the HSCH2CH2CH2O(EO)5-7CH3 SAMs order faster and under a wider range of conditions than omega-alkyl 1-thiaolio(ethylene oxide) [HS(EO)xCH3] SAMs, reported earlier (Vanderah, D. J., et al. Langmuir 2002, 18, 4674 and Vanderah, D. J., et al. Langmuir 2003, 19, 2612).     

Negative ion chemical ionization mass spectra of (η6-arene)Cr(CO)3

The negative ion chemical ionization mass spectra, with ammonia and methane as reagent gases, of the (η⁶-arene)Cr(CO)₃ complexes, where the arene is C₆H₅COCH₃, C₆H₅COC₂H₅, C₆H₅COC₃H₇, C₆H₅COC(CH₃)₃, 2-CH₃C₆H₄COC₃H₇, C₆H₅COOCH₃, C₆H₅CH₃, 1,3,5-(CH₃)₃C₆H₃ and C₆H₅CH₂COC₂H₅, are reported. Similar behaviour is observed with the two reagent gases, but ammonia shows a much higher abundance for the ions produced by reactions of [NH₂]^? with sample molecules. The compounds containing the C₆H₅CO group display an abundant [M]^{? ˙}, whereas the other compounds exhibit [M? H]^? as base peak, produced by ion/molecule reactions. A comparison of the negative ion chemical ionization mass spectra of the (η⁶-arene)Cr(CO)₃ complexes with those of the corresponding ligands shows the strong electron withdrawing power of the Cr(CO)₃ group in the gas phase.     

Synthesis and preliminary biological evaluation of a new pyridocarbazole derivative covalently linked to a thymidine nucleoside as a potential targeted antitumoral agent. I

The therapy of human cancer is one of the more pursued goals by medicinal chemistry research. Most of the compounds clinically used as a treatment owe their efficacy to their cytotoxic interaction (direct or indirect) with nuclear DNA. This interaction results in the inhibition of DNA synthesis and the degradation of nucleic strands. Ellipticine is a naturally occurring 6H-pyrido[4,3-b]carbazole alkaloid endowed with antitumor activity, and several ellipticine derivatives have been used in clinical trials. We previously reported some 1,4-dimethyl-9H-carbazole derivatives structurally related to ellipticine. The purpose of our research was to transform the pyridocarbazole in a prodrug so that it would have more penetration in the tumor cells and block their replication. Our prodrug is slowly hydrolyzed in human plasma in the corresponding acid. From these preliminary results, we deduce that our compound can block cellular replication. Our hypothesis is that the antitumoral activity is probably related to the induction of damage to DNA, without cellular lysis in the short term.     

Evaluation of thermodynamic properties of irreversible protein thermal unfolding measured by DSC

Summary We assessed the applicability of the extrapolation procedure at infinite scanning rate to differential scanning calorimetry (DSC) data related to irreversible protein unfolding. To this aim, an array of DSC curves have been simulated on the basis of the Lumry-Eyring model N↔U→F. The results obtained confirmed that when the apparent equilibrium constant K_{app (T=T1/2)} is lower than 3, the application of the extrapolation procedure provides accurate thermodynamic parameters. Although this procedure applies only to monomeric proteins for which the Lumry-Eyring model is a reasonable approximation, it will hopefully contribute to increase the potential of DSC in obtaining reliable thermodynamic information regarding the folding/unfolding equilibrium.     

Evolutionarily conserved functional mechanics across pepsin-like and retroviral aspartic proteases

The biological function of the aspartic protease from HIV-1 has recently been related to the conformational flexibility of its structural scaffold. Here, we use a multistep strategy to investigate whether the same mechanism affects the functionality in the pepsin-like fold. (i) We identify the set of conserved residues by using sequence-alignment techniques. These residues cluster in three distinct regions: near the cleavage-site cavity, in the four beta-sheets cross-linking the two lobes, and in a solvent-exposed region below the long beta-hairpin in the N-terminal lobe. (ii) We elucidate the role played by the conserved residues for the enzymatic functionality of one representative member of the fold family, the human beta-secretase, by means of classical molecular dynamics (MD). The conserved regions exhibit little overall mobility and yet are involved into the most important modes of structural fluctuations. These modes influence the substrate-catalytic aspartates distance through a relative rotation of the N- and C-terminal lobes. (iii) We investigate the effects of this modulation by estimating the reaction free energy at different representative substrate/enzyme conformations. The activation free energy is strongly affected by large-scale protein motions, similarly to what has been observed in the HIV-1 enzyme. (iv) We extend our findings to all other members of the two eukaryotic and retroviral fold families by recurring to a simple, topology-based, energy functional. This analysis reveals a sophisticated mechanism of enzymatic activity modulation common to all aspartic proteases. We suggest that aspartic proteases have been evolutionarily selected to possess similar functional motions despite the observed fold variations.     

Synthesis of a ditopic cyclophane based on the cyclobutane ring by chalcone photocycloaddition

The intramolecular photocycloaddition of chalcones to give cyclobutanes has proven to be a fast and simple method to shrink a cyclophane ring to a tricyclic system, in order to prepare potential ditopic receptors. In particular, the chalcone 1, having dioxyethylene chains as spacers, is converted in high yield to the cyclobutane 2. NOESY spectroscopy indicates that the formation of 2 occurs by a head-to-head syn ring closure.