A study of the OH- -induced beta-elimination reactions of 2-(4-chloroethyl)pyridine, 2-(2-chloroethyl)pyridine, 1-methyl-2-(4-chloroethyl)pyridinium iodide and 1-methyl-2-(2-chloroethyl)pyridinium iodide in acetonitrile/water

Second-order rate constants have been determined for the title reactions in OH(-)/H(2)O and in OH(-)/ (CH(3)CN/H(2)O) [30/70, 60/40, and 85/15 (v/v) mixtures]. A relatively small increase in reactivity is observed for the four substrates upon increasing the percentage of CH(3)CN in the solvent mixture. The methyl activating factors (/) are also slightly affected by the solvent composition. On the other hand, the high acceleration of the reaction by methylation of the pyridine ring amounts to 10(4)-10(6) according to an E1cb mechanism.     

Control of surface properties using fluorinated polymer brushes produced by surface-initiated controlled radical polymerization

Surface-grafted styrene-based homopolymer and diblock copolymer brushes bearing semifluorinated alkyl side groups were synthesized by nitroxide-mediated controlled radical polymerization on planar silicon oxide surfaces. The polymer brushes were characterized by X-ray photoelectron spectroscopy (XPS), near-edge X-ray absorption fine structure (NEXAFS), and time-dependent water contact angle measurements. Angle-resolved XPS studies and water contact angle measurements showed that, in the case of the diblock copolymer brushes, the second block to be added was always exposed at the polymer-air interface regardless of its surface energy. Values of z*/Rg were estimated based on the radius of gyration, Rg, of the grafted homopolymer or block copolymer chains for the grafted brushes and thickness of the brush, z*. The fact that z*/Rg > 1 suggests that all these brushes are stretched. These results support the idea that after grafting the first block onto the surface the nitroxide-end capped polymer chains were able to polymerize the second block in a "living" fashion and the stretched brush so formed was dense enough that the outermost block in all cases completely covers the surface. NEXAFS analysis showed a relationship between the surface orientation of the fluorinated side chains and brush thickness with thicker brushes having more oriented side chains. Time-dependent water contact angle measurements revealed that the orientation of the side chains of the brush improved the surface stability toward reconstruction upon prolonged exposure to water.     

Spatially resolved gas phase composition measurements in supersonic flows using tunable diode laser absorption spectroscopy

We used a tunable diode laser absorption spectrometer to follow the condensation of D(2)O in a supersonic Laval nozzle. We measured both the concentration of the condensible vapor and the spectroscopic temperature as a function of position and compared the results to those inferred from static pressure measurements. Upstream and in the early stages of condensation, the quantitative agreement between the different experimental techniques is good. Far downstream, the spectroscopic results predict a lower gas phase concentration, a higher condensate mass fraction, and a higher temperature than the pressure measurements. The difference between the two measurement techniques is consistent with a slight compression of the boundary layers along the nozzle walls during condensation.     

Imine hydrolysis and role of a rhodium(I)-imine-amine complex in homogeneous H2-hydrogenation of the imine and a rare example of inequivalent NH2 protons

A Rh-catalyzed, homogeneous hydrogenation of the imine, PhCH(2)N=CHPh, is shown to involve a Rh-imine-amine species that subsequently activates H(2), the amine (benzylamine) being formed via a Rh-catalyzed hydrolysis of the imine by adventitious water. The imine-amine complex, cis-(Rh[P(p-tolyl)(3)](2)(PhCH(2)N=CHPh)(NH(2)CH(2)Ph))PF(6) (2b), is structurally characterized, and the solution (1)H NMR data reveal inequivalent NH(2) protons.     

Characterisation by high-performance liquid chromatography-multiple mass spectrometry of intermediate compounds formed from mepanipyrim photoinduced degradation

Mepanipyrim, a widely used pyrimidinic fungicide, has been photocatalytically degraded in aqueous solution on TiO2. The purpose of this study is to artificially produce degradation compounds similar to those formed in the environment. Numerous intermediates have been identified and characterised through a MSn spectra analysis, allowing us to give insight into the early steps of the degradation process. Several concomitant pathways occur concerning both reductive and/or oxidative attacks; the main steps involve the cleavage of triple bond, mono and bihydroxylation of the parent molecule, loss of benzene moiety and/or propynylic chain. All these structures are easily degraded themselves, so that the only species recognised to endure in the investigated times is guanidine. A mechanism of transformation accounting for the identified intermediates is proposed.     

The Staudinger reaction of platinum(II)- and palladium(II)-coordinated 2-(azidomethyl)phenyl isocyanide. X-ray structure of trans-[PtCl{(H)}(PPh3)2][BF4] · CDCl3 · H2O

2-(Azidomethyl)phenyl isocyanide, 2-(CH₂N₃)C₆H₄NC (AziNC), coordinates to some cationic Pt(II) and Pd(II) species to afford isocyanide complexes of the type trans-[MCl(AziNC)(PPh₃)₂][BF₄] (M=Pt, l; Pd, 2). AziNC is coordinated also in some neutral Pt(II) and Pd(II) species such as [MCl₂(AziNC)₂] (M=Pt, 3; Pd, 4) derived from the reactions of 2 equiv. of AziNC with [PtCl₂(COD)] and [PdCl₂(MeCN)₂], respectively. Complexes 1 and 2 react with 1 equiv. of PPh₃ affording the heterocyclic carbene complexes trans-[MCl{(H)}(PPh₃)₂][BF₄] (M=Pt, 5; Pd, 6). Complexes 3 and 4 react with 1 equiv. of PPh₃ displacing the isocyanide with the formation of the complexes cis-[MCl₂(AziNC)(PPh₃)] (M=Pt, 7; Pd, 8). These latter ones react with 2 equiv. of PPh₃ affording as the final products the cationic carbene species trans-[MCl{(H)}(PPh₃)₂][Cl] (M=Pt, 9; Pd, 10). Complex 5 was also characterized by single crystal X-ray diffraction. The carbene complex is square-planar and the angle formed between the platinum square plane and the heterocyclic carbene ligand is 87.9(2)°. The C(1)-N(1) and C(1)-N(2) bond distances in the latter of 1.32(2) and 1.30(2) Å, respectively, are short for a single bond and indicate extensive π-bonding between the nitrogen atoms and the carbene carbon.     

Structural Stability of Azurin Encapsulated in Sol-Gel Glasses: A Fluorometric Study

In this study we investigated the structural features of azurin, a blue copper-containing enzyme, upon encapsulation in tetramethoxysilane derived sol-gel glasses. Fluorescence spectroscopy revealed that gelation of inorganic networks does not affect the protein tertiary structure and only after two months solvent phase loss altered protein stability. In case of organically modified sol-gel matrices, the protein stability was reduced after encapsulation into hosts modified by adding 3-Mercaptopropyl-trimethoxysilane, 3-Glycidyloxypropyl-trimethoxysilane and Trimethoxy octylsilane, while it was found to be enhanced in networks doped with 3-Trimethoxysilyl-propyl methacrylate and 3-Aminopropyl-trimethoxysilane. In order to better investigate the effects of silica glasses on azurin stability, unfolding experiments of the protein, in solution or entrapped, were also performed in the presence of both methanol and guanidinium hydrochloride (GdHCl). Our results suggest that the matrix protects azurin against the aggregation induced by alcohol, and that the free energy change value upon unfolding by GdHCl was lower than the value calculated for azurin in solution and was dependent on the surface chemistry of silica matrix.     

Ion chromatographic determination of sulfide and cyanide in real matrices by using pulsed amperometric detection on a silver electrode

The determination of free sulfide and cyanide by pulsed amperometric detection (PAD) at a silver-working electrode was improved through a deep de-oxygenation (at least 10 min) of both standard and real solutions containing the two analytes and adopting a two-potential waveform able to eliminate Ag working electrode fouling. The waveform stepped around the oxidation of Ag in the presence of 0.1-0.4 M hydroxyl ion, from -0.1 to 0.1 V versus saturated calomel electrode (SCE). The eluent composition (0.4 M NaOH plus 7.5 mM oxalate solution) allowed a very good column efficiency and selectivity. The presence of a polysulfide species was hypothesized in sulfide solutions that had not been de-oxygenated and aged. The polysulfide eluted just before sulfide and was confirmed by a chemical test with SO3(2-) producing the elimination of the polysulfide peak. Detection limits, according to the Hubaux-Vos method, were 1.0 and 2.0 microg/l for S2- and CN , respectively. We demonstrated good performance of the optimized method by repeatedly injecting standard solutions and by analyzing different real matrices. The method exhibited very good accuracy and repeatability (10 microg/l and a 500 microl injection loop, had a repeatability better than 3% for sulfide and 100 microg/l had a repeatability better than 1% for cyanide). The two-potential waveform ensured long-term stability of the electrode surface that required no manual polishing procedure for at least 1 month (20 analysis per day).     

Asymmetric aminolysis of aromatic epoxides: a facile catalytic enantioselective synthesis of anti-beta-amino alcohols

[reaction: see text] The first asymmetric aminolysis of trans-aromatic epoxides with anilines is described. The process affords enantioenriched anti-beta-amino alcohols in up to 99% ee. The complete regio- and diastereoselectivity observed uses commercially available [Cr(Salen)Cl] as a Lewis acid catalyst and in combination with a very simple experimental procedure renders the present reaction a facile and practical tool for the synthesis of chiral nonracemic anti-beta-amino alcohols.