Hydroformylation of Olefins Catalyzed by Rhodium Trichloride Anchored on Ti-HMS

Rhodium trichloride supported on Ti-hexagonal mesoporous silica (Ti-HMS), via a bipyridyl group, is an efficient catalyst for the hydroformylation of olefins at 120 °C and 40.8 atm of CO/H₂ (CO/H₂=2/1). The catalyst is selective leading to high ratios of linear or branched aldehydes from functionalized olefins, and high activity in the case of propene which gave a turnover frequency of 6209 mol/mol(Rh)/h.     

The role of salt on cellulose dissolution in ethylene diamine/salt solvent systems

Ethylene diamine (EDA)/salt solvent systems can dissolve cellulose without any pretreatment. A comparison of the electrical conductivity of different salts in EDA was made at 25 °C, and conductivity decreased in the order of KSCN>KI>NaSCN at the same molar concentration. Among the salts tested, potassium thiocyanate (KSCN) was capable of dissolving both high molecular weight (DP>1000) and low molecular weight (DP = 210) cellulose, and this was confirmed by polarized light microscopy. ³⁹K and ¹⁴N NMR experiments were conducted at 70 °C as a function of cellobiose concentration with EDA/KSCN as the solvent. The results showed that the K⁺ ion interacts with cellobiose more than the SCN⁻ ion does. Recovered cellulose was studied by infrared spectroscopy (FTIR) and wide angle X-ray diffraction (WAXD). Changes in the FTIR absorption bands at 1,430 and 1,317 cm⁻¹ were associated with a change in the conformation of the C-6CH₂OH group. The changes in positions and/or intensities of absorption bands at 2,900, 1,163, and 8,97cm⁻¹ were related to the breaking of hydrogen bonds in cellulose. X-ray diffraction studies revealed that cellulose, recovered by precipitating cellulose solutions with water, underwent a polymorphic transformation from cellulose I to cellulose II.     

Preparation of high molecular weight polyurethane particles by nonaqueous emulsion polyaddition

A versatile nonaqueous emulsion polyaddition process for the one-step fabrication of spherical polyurethane nanoparticles is presented. Three different emulsion systems were used consisting of N,N′-dimethylformamide (DMF) dispersed in n-hexane, acetonitrile dispersed in cyclohexane, and acetonitrile dispersed in tetradecane. After successful stabilization of the emulsion systems by using a poly(isoprene)-poly(methylmethacrylate) block copolymer, the fabrication of the polyurethanes was carried out within the dispersed polar phase. The polyurethane particles showed average diameters as small as 35 nm. Additionally, infrared (IR) characterization revealed that the formation of any urea, which decreases the mechanical properties of the polyurethanes, was prevented during the polyaddition. This was attributed to the anhydrous reaction conditions. Gel permeation chromatography (GPC) analysis demonstrated the average molecular weights (M _n) of the polyurethanes to be as high as 16,500 g/mol, corresponding to conversions of 0.98. Comparable molecular weights and conversions have not previously been achieved without the formation of urea.     

The synthesis and characterization of a new (<Emphasis Type="Italic">E,E</Emphasis>)-dioxime containing 13-membered dithiadiazamacrocyclic moieties and its mononuclear complexes

A new (E,E)-dioxime, (6Z,7Z)-15,16-dihydro-14H-dibenzo[b,h][1,10,4, 7]dithiadiazacyclotride-cine-6,7(5H,8H)-dionedioxime (H ₂ L) has been synthesized by reacting cyanogen-di-N-oxide (2) with 2,2′-[propane-1,3-diylbis(thio)]dianiline (1). Mononuclear complexes (4) and (5) of this ligand have been synthesized by reacting the vic-dioxime (H₂L) with NiCl₂ · 6H₂O and CoCl₂ · 6H₂O, respectively. The BF ₂ ⁺ capped Ni(II) and Co(III) complexes (6) and (7) of the dioxime have been synthesized from (4) and (5). The new compounds were characterized by a combination of elemental analysis, ¹H- and ¹³C-n.m.r, i.r. and m.s. spectral data.     

Polymer dispersions from catalytic polymerization in aqueous systems

By contrast to traditional free radical emulsion polymerization, catalytic polymerization allows for polymer microstructure control. In terms of polymerizable monomers, both techniques are largely complementary. Since the beginning of this decade, an increasing number of reports on polyolefin, polybutadiene, polyalkenamer, polynorbornene, polyketone, and polyacetylene dispersions prepared by catalytic polymerization in disperse aqueous systems has appeared. This contribution reviews the preparation of these dispersions, their colloidal properties, particle formation mechanisms, particle morphologies, and polymer microstructures.     

Thermal behavior of polyacrylonitrile polymers synthesized under different conditions and comonomer compositions

Polyacrylonitrile (PAN) polymers are used as precursors for carbon fiber production. This process requires an oxidative stabilization step, which can be studied by differential scanning calorimetry (DSC). In this sense, thermal behavior of PAN based terpolymers by different polymerization processes, compositions and itaconic acid concentrations in the reaction media were investigated. The obtained results showed that the addition of itaconic acid and methyl acrylate as comonomers resulted a lower heat flow during the process comparing to the PAN homopolymer. It suggested that these comonomers aid the oxidative stabilization stage for all studied process. The redox system polymerization at 40°C resulted in a lower heat flow. Itaconic acid decreases slightly initial and peak temperatures of the terpolymer and heat flow until concentration of 3y. The cyclization temperature decreases when MAis incorporated into the terpolymer compared to the MMA terpolymer and increases when MAA is the acidic monomer. Among terpolymers the AN/MA/AA polymer showed the best thermal behavior for carbon fiber producing.     

Thiotropolone as a chromogenic reagent for the simultaneous determination of cobalt(II) and nickel(II)

Thiotropolone forms chloroform-soluble reddish-brown and violet complexes with cobalt(II) and nickel(II), in the pH range 7.0-8.5 and 6.0-9.0 respectively. Based on this, a sensitive and rapid method for the spectrophotometric determination of traces of cobalt and nickel in metals and alloys has been developed. The two metals can be determined accurately in the range 0.6-2.6 ppm of cobalt and 0.75-4.57 ppm of nickel, simultaneously.     

Nucleophilic substitution in certain bicyclic sesquiterpene alcohols under chemical lonization conditions

Substitution of amino for hydroxyl groups in certain sesquiterpene alcohols has been studied by chemical ionization mass spectrometry using ammonia and ammouia-d₃ as the reagent gases, and by mass-analysed ion kinetic energy spectrometry and collision-induced decomposition mass-analysed ion kinetic energy measurements. Depending upon the source conditions and the nature of the substrates, both S_Ni and S_N1 mechanisms have been found to operate. No evidence is obtained for an S_N2 mechanism in these compounds. In centdarol and isocentdarol, addition of NH₃ to the double bond, followed by elimination of H₂O, also contributes to the substitution process. Attack of [NH₄]⁺ on the epoxide function, followed by loss of H₂O, appears to lead to the substitution ions in epoxycentdarol, epoxyisocentdarol and epoxyhimachalol.     

Assessment of corrosion resistance of surface-coated galvanized steel by analysis of the AC impedance spectra measured on the salt-spray-tested specimen

In the present work, corrosion resistance of surface-coated galvanized steel was quantitatively determined by an analysis of the alternating current (AC) impedance spectra measured on the salt-spray-tested specimen. To evaluate the corrosion resistance of the surface-coated galvanized steel, AC impedance spectroscopy was performed on the salt-spray-tested specimen previously exposed to salt-sprayed corrosive environment. From the analysis of the impedance spectra, the area fraction transient of white rust θ ₂(t) was theoretically derived from the equivalent circuit equation by using two fitting parameters. The values of the two fitting parameters were determined by fitting the empirical transient equations to the area fraction of the resin coating layer and to the total resistance obtained from the impedance spectra measured, respectively. From the analyses of θ ₂(t) for four kinds of surface-coated galvanized steels with various resin coating layers, it is indicated that as the values of the two fitting parameters decrease in the order of CP, GI, OD and OM (commercial trade names) specimens, the corrosion resistance increases in that order as well. Furthermore, from the quantitative comparison of the two fitting parameters with the polarization resistance of the upper resin coating layer R _p determined from the potentiodynamic polarization curve, it is suggested that the two fitting parameters decrease in value as well with increasing R _p.     

Second Dissociation Constant of H<Subscript>2</Subscript>Te and the Absorption Spectra of HTe<Superscript>–</Superscript>, Te<Superscript>2–</Superscript> and Te<Subscript>2</Subscript><Superscript>2–</Superscript> in Aqueous Solution

We have measured the second acid dissociation constant, K _2a , at several ionic strengths for hydrogen telluride (H₂Te) using the Charge Transfer to Solvent (CTTS) uv spectra of its anions HTe⁻ and Te²⁻. Since it is produced in our solutions, we have also determined the spectra of Te₂ ²⁻ both in the uv and in the visible regions. At 25 ^∘C, K _2a = (1.28 ± 0.02) × 10⁻¹² by extrapolation to zero ionic strength. Its value at an ionic strength equal to 0.5 mol.dm^-3 was estimated to be (8.7 ± 0.2) × 10⁻¹². The solution thermodynamics of these species are also discussed and comparisons are made to related acids.