Enhanced Catalytic Activity in Liquid‐Exfoliated FeOCl Nanosheets as a Fenton‐Like Catalyst

A facile liquid‐phase exfoliation method to prepare few‐layer FeOCl nanosheets in acetonitrile by ultrasonication is reported. The detailed exfoliation mechanism and generated products were investigated by combining first‐principle calculations and experimental approaches. The similar cleavage energies of FeOCl (340 mJ m^?2) and graphite (320 mJ m^?2) confirm the experimental exfoliation feasibility. As a Fenton reagent, FeOCl nanosheets showed outstanding properties in the catalytic degradation of phenol in water at room temperature, under neutral pH conditions, and with sunlight irradiation. Apart from the increased surface area of the nanosheets, the surface state change of the nanosheets also plays a key role in improving the catalytic performance. The changes of charge density, density of states (DOS), and valence state of Fe atoms in the exfoliated FeOCl nanosheets versus plates illustrated that surface atomistic relationships made the few‐layer nanosheets higher activity, indicating the exfoliation process of the FeOCl nanosheets also brought about surface state changes.     

Quantification of complanatoside A in rat plasma using LC‐MS/MS and its application to a pharmacokinetic study

Complanatoside A is a flavonol glycoside isolated from Astragalus complanatus, and currently it is used as a quality control index for A. complanatus in the 2010 edition of the Chinese Pharmacopoeia. For the first time, a simple and sensitive LC‐MS/MS method was developed for the determination of complanatoside A in rat plasma over the range of 2.3–575 ng/mL. Complanatoside A was extracted from plasma by a protein precipitation procedure, separated by LC and detected by MS/MS in positive electrospray ionization mode. The method was validated for selectivity, carryover, sensitivity, linearity, extraction recovery, matrix effect, accuracy, precision and stability studies. The lower limit of quantification was established at 2.3 ng/mL. Intra‐ and inter‐day precisions (LLOQ, low‐QC, med‐QC and high‐QC) were <7.9%, and accuracies were between 94.0 and 105.1%. Matrix effect was acceptable (97.9–103.0%) and extraction recovery was reproducible (88.5–94.4%). Complanatoside A was stable in the investigated conditions. The method was applied to the pharmacokinetics of complanatoside A in rats. Copyright © 2015 John Wiley & Sons, Ltd.     

高功率全固态绿光激光技术研究进展

 报道了高功率全固态腔内和腔外倍频两种绿光激光器研究进展。腔内倍频绿光激光器采用L型腔双棒串接结构,在重复频率10 kHz时,用三硼酸锂晶体倍频获得绿光功率186 W,光-光效率达15.8%。腔外倍频绿光激光器采用主振荡和功率放大器,在重复频率400 Hz时,获得基频激光单脉冲能量1.2 J,采用Ⅱ类相位匹配KTP晶体腔外倍频,获得525 mJ的绿光输出,倍频效率为43.7%。采用偏振合成技术获得了单脉冲能量大于1 J的绿光输出。在该激光放大器实验装置上,进行了双模块热效应补偿技术和受激布里渊散射相位共轭技术实验研究,改善了激光光束质量。     

紫外光辐照对TiO2纳米线电输运性能的影响及磁阻效应研究

采用溶胶凝胶法以及静电纺丝法, 利用热处理工艺, 成功制备出了多晶锐钛矿型TiO₂纳米线, 通过两线法在室温下测试单根TiO₂纳米线的V-I曲线来研究其电输运性能及磁阻效应. 结果表明: 在无光照环境下其V-I曲线为不过零点的直线, 零场电阻较大, 在磁场作用下电阻下降, 表现出负磁阻效应; 紫外光辐照环境下TiO₂纳米线载流子浓度增加使得电阻变小, 然而在磁场作用下电阻增大, 表现为正磁阻效应. 紫外光辐照导致的载流子浓度变化, 使得负磁阻转变为正磁阻, 我们将磁阻变化归结为d电子局域导致的负磁阻与能带劈裂导致的正磁阻两种机理相互竞争的结果.     

Lamellar metal-organic complex and its rod-like nanoparticles prepared with ultrasonic technique

Metal-organic complex (H3NCH2CH2NH2)3[MoO2(OC6H4O)2] with a lamellar morphology has been syn- thesized. Its crystal structure was confirmed by single-crystal X-ray diffraction. The morphology of the crystal was observed by scanning electron microscopy (SEM). The metal-organic nanoparticles have been prepared by using an ultrasonic method. The morphology of the as-prepared nanoparticles was observed by transmission electron microscopy (TEM). The possible formation mechanism has also been proposed.     

Interaction of an electron bunch with a laser pulse in vacuum

The output properties of electrons accelerated by the vacuum laser acceleration scheme CAS (capture and acceleration scenario) are addressed. The transport process of the electron bunch, the fraction of the CAS electrons of the incident electrons, the correlation of electron energy with position and scattering angle, the energy spectrum and angular distributions as well as the emittance of the outgoing electrons are studied at a laser intensity of a₀=10. In addition, the effects of the laser intensity, beam width, and pulse duration on the properties of the output electrons are also examined. Physical explanations of those output characteristics are presented based on the mechanism behind the CAS scheme. The feasibility of CAS to become a realistic laser accelerator scheme is explored. PACS 41.75.Jv; 42.60.Jf; 41.85.Ja     

Validation study on 660 pesticide residues in animal tissues by gel permeation chromatography cleanup/gas chromatography-mass spectrometry and liquid chromatography-tandem mass spectrometry

A new method using gel permeation chromatography (GPC) cleanup followed by gas chromatography-mass spectrometry (GC-MS) and liquid chromatography-tandem mass spectrometry (LC-MS-MS) has been established for quantitative determination of 437 pesticide residues in animal tissues such as beef, mutton, pork, chicken, and rabbit. Based on an appraisal of the characteristics of both GC-MS and LC-MS-MS, validation experiments were conducted for 660 pesticides. In the method, 10 g animal samples were mixed with 20 g sodium sulfate and extracted with 35 mL of cyclohexane+ethyl acetate (1+1) twice by blender homogenization, centrifugation, and filtration. Evaporation was conducted and an equivalent of 5 g sample was injected into a 400 mm x 25 mm S-X3 GPC column, with cyclohexane+ethyl acetate (1+1) as the mobile phase at a flow rate of 5 mL/min. The 22-40 min fraction was collected for subsequent analysis. For the 368 pesticides determined by GC-MS, the portions collected from GPC were concentrated to 0.5 mL and exchanged with 5 mL hexane twice. For the 69 pesticides by LC-MS-MS, the portions collected from GPC were dissolved with acetonitrile+water (60+40) after taking the extract to dryness with nitrogen gas. In the linear range of each pesticide, the correlation coefficient was r > or = 0.98, exceptions being dinobuton, linuron, and fenamiphos sulfoxide. At the low, medium and high three fortification levels of 0.2-4800 microg/kg, recoveries fell within 40-120%, among which 417 pesticides recoveries between 60% and 120%, accounting for 95%, 20 analytes between 40% and 60%, accounting for 5%. The relative standard deviation was below 28% for all 437 pesticides. The limits of detection for the method were 0.2-600 microg/kg, depending on each pesticide.     

In situ spectral imaging of marker proteins in gastric cancer with near-infrared and visible quantum dots probes

This study presents the investigation of bioconjugating ability of near-infrared (NIR) CdSeTe/ZnS quantum dots (QDs) (710 nm) and visible CdSe QDs (595 nm) in immunofluorescent staining for cancer biomarkers in gastric cancer tissues probed with the homemade Hadamard transform (HT) spectral imaging microscope and a commercial multispectral imaging system. The results show that imunostaining ability of NIR QDs probes is stronger than that of visible QDs when the two kinds of QDs are simultaneously used to probe the cancer biomarkers such as cytokeratin 20 (CK20) and proliferating cell nuclear antigen (PCNA) in gastric cancer tissues. Moreover, when the two QDs probes are used for immunostaining successively for the same target molecules, staining order has great influences on the final results due to their different conjugating ability to the marker proteins. The results imply that NIR QDs hold more promise for real-time imaging of tumor tissues due to its higher sensitivity and contrast. In addition, the results also demonstrate the potential of Hadamard transform spectral imaging as a useful tool in biomedical analysis and quantitative evaluation for tumor tissues.     

Effects of gamma irradiation and accelerated aging on GO/UHMWPE nanocomposites

This article investigates irradiated and accelerated aged graphene oxide (GO)/ultrahigh molecular weight polyethylene (UHMWPE) nanocomposites. The prepared GO/UHMWPE nanocomposites are gamma-irradiated at a high irradiation dose in a vacuum and then accelerated aging procedure is performed at 80°C in an air oven for 21 days. Irradiated and aged samples are characterized by Raman spectrum, Fourier transform infrared (FT-IR) spectrum, differential scanning calorimetry, contact angle, and gel content. Filling GO reduces the intensity of Raman spectrum of UHMWPE and irradiation or aging cannot affect vibrational modes of UHMWPE and GO/UHMWPE. The result of the FT-IR spectrum shows that UHMWPE and GO/UHMWPE basically have the same oxidation index values, whether with irradiation or accelerated aging. Irradiation or aging can slightly increase the melting temperature. GO, irradiation, or aging can significantly increase the crystallinity and improve wetting properties. In irradiated GO/UHMWPE, GO is able to maintain the efficiency of the cross-linking. However, after aging, the cross-linking density of GO/UHMWPE is reduced significantly. According to the above results, it is proposed that GO shows a very weak scavenging free radicals capacity in GO/UHMWPE composites and cannot display antioxidant capacity.     

Electrospun‐Technology‐Derived High‐Performance Electrochemical Energy Storage Devices

Electrospinning, as a novel nontextile filament technology, is an important method to prepare continuous nanofibers and has shown its remarkable advantages, such as a broadly applicable material system, controllable fiber size and structure, and simple process. Electrospun nanofiber membranes prepared by electrospinning have shown promising applications in many fields, such as supercapacitors, lithium‐ion batteries, and sodium‐ion batteries, owing to their large specific surface area and adjustable network pore structure. The principle of electrospinning and key points relevant to its usage in the preparation of high‐performance electrochemical energy storage materials are reviewed herein based on recent publications, particularly focusing on research progress of relative materials. Also, this review describes a distinctive conclusion and perspective on the future challenges and opportunities in electrospun nanomaterials.