Effective interactions and charges in58Ni

The structure of the low-lying states of⁵⁸Ni has been calculated in shell model by assuming an inert⁵⁶Ni core plus two valence nucleons in the p_3/2, f_5/2 and p_1/2 orbitals. The two-body matrix elements are first expressed in terms of seven radial matrix elements and these are then parametrized to give best fit between the computed and the observed energies of the levels below 4 MeV. The wave-functions obtained using these two-body matrix elements are used to study the concept of effective charges. It is found that a single effective charge is not sufficient to predict theB(E2) rates equally well for the thirteen known transitions for which experimental values are available. Assumption of state-dependent effective charges gives a far better agreement. An analysis using wavefunctions obtained with Kuo’s two-body matrix elements also gives a similar result.     

Engineering emissive europium and terbium complexes for molecular imaging and sensing

Emissive f-block coordination complexes constitute an important class of optical probes, with applications ranging from sensing of bioactive species, high throughput assays and screening protocols in vitro, to time-resolved imaging studies in cellulo or in vivo. The key chemistry issues to be addressed in complex design and characterisation are defined, with an emphasis on the use of emissive europium and terbium complexes and their conjugates in molecular imaging. Both luminescent 'tags' useful in energy transfer studies and 'responsive' systems for sensing are discussed.     

One pot synthesis of diarylpyrido[3,2‐c]coumarins

Various diarylpyrido[3,2‐c]coumarins 3a‐l have been synthesized in one step by reacting 4‐hydroxy coumarins 1a‐d with α,β‐unsaturated ketones 2a‐c in the presence of ammonium acetate and acetic acid under Kroehnke's reaction conditions.     

First synthesis of furo[3,4‐c]coumarins

Various 1,3‐dimethyl and 1‐methyl‐3‐phenylfuro[3,4‐c]coumarins ( 5a‐h and 6a‐h ) have been synthesized by demethylation cyclization of the respective 3‐aryl‐4‐ethoxycarbonyl furans ( 3a‐h and 4a‐h ). These ethoxycarbonyl furans were prepared by reacting appropriate 1‐aryl‐2‐nitro‐prop‐1‐ene ( 1a‐h ) with ethyl acetoacetate or ethyl benzoylacetate under Nef reaction condition.     

Simultaneous preconcentration of uranium(VI) and thorium(IV) from aqueous solutions using a chelating calix[4]arene anchored chloromethylated polystyrene solid phase

A new chelating polymeric sorbent is developed using Merrifield chloromethylated resin anchored with calix[4]arene-o-vanillinsemicarbazone for simultaneous separation and solid phase extractive preconcentration of U(VI) and Th(IV). The “upper-rim” functionalized calix[4]arene-o-vanillinsemicarbazone was covalently linked to Merrifield resin and characterized by FT-IR and elemental analysis. The synthesized chelating polymeric sorbent shows superior binding affinity towards U(VI) and Th(IV) under selective pH conditions. Various physico-chemical parameters that influence the quantitative extraction of metal ions were optimized. The optimum pH range and flow rates for U(VI) and Th(IV) were 6.0-7.0 and 1.0-4.0 ml min⁻¹ and 3.5-4.5 and 1.5-4.0 ml min⁻¹, respectively. The total sorption capacity found for U(VI) and Th(IV) was 48734 and 41175 μg g⁻¹, respectively. Interference studies carried out in the presence of diverse ions and electrolyte species showed quantitative analyte recovery (98-98.5%) with lower limits of detection, 6.14 and 4.29 μg l⁻¹ and high preconcentration factors, 143 and 153 for U(VI) and Th(IV), respectively. The uptake and stripping of these metal ions on the resin were fast, indicating a better accessibility of the metal ions towards the chelating sites. The analytical applicability of the synthesized polymeric sorbent was tested with some synthetic mixtures for the separation of U(VI) and Th(IV) from each other and also from La(III), Cu(II) and Pb(II) by varying the pH and sequential acidic elution. The validity of the proposed method was checked by analyzing these metal ions in natural water samples, monazite sand and standard geological materials.     

A rapid and specific approach for direct measurement of donepezil concentration in human plasma by LC-MS/MS employing solid-phase extraction

A selective, rapid and simple liquid chromatography-tandem mass spectrometry (LC-MS/MS) method is described for assay of donepezil in human plasma using escitalopram as an internal standard. Chromatographic separation was achieved on a Betabasic-C(8), 5 microm, 100 x 4.6 mm column using methanol:water:formic acid (90:9.97:0.03, v/v/v) as mobile phase. Detection of donepezil and internal standard was achieved by ESI MS/MS in positive ion mode using 380.20/91.10 and 325.13/262.00 transitions, respectively. The linearity over the concentration range of 0.15-50 ng/mL for donepezil was obtained and the lower limit of quantification was 0.15 ng/mL. For each level of quality control samples, inter-day and intra-day precisions (RSD) were < or =8.92 and 10.35% and accuracy (%RE) were < or =7.33% and 9.33%, respectively. The recovery was more than 88.50% for both donepezil and internal standard by solid-phase extraction, eliminating evaporation and reconstitution steps.     

Synthesis of metal-based nanofluids and their thermo-hydraulic performance in compact heat exchanger with multi-louvered fins working under laminar conditions

Present experimental investigation incorporates characterization of Al nanopowder, synthesis of Al/water nanofluids, and effect of these nanofluids on thermal performance of compact heat exchanger. Al nanoparticles are characterized using TEM and XRD. Al/water nanofluid is prepared by dispersing metal basis aluminium nanoparticles of average 100 nm size into double distilled water at two different particle volume concentrations of 0.1 and 0.2%. The nanofluids are prepared by two-step method and cetyl trimethyl ammonium bromide surfactant is used to stabilize the nanofluid. Thermo-physical properties of nanofluids at two different concentrations and their variation with fluid temperature are measured experimentally. It is examined that thermal conductivity, viscosity, and density of the nanofluid increased with the increase of volume concentrations. Furthermore, by increasing the fluid temperature, thermal conductivity is intensified, while the viscosity and density are decreased. Heat transfer parameters are strong functions of these thermo-physical properties. Therefore, comprehensive findings on heat transfer coefficient, Nusselt number, colburn factor, friction factor, and effectiveness are determined experimentally for prepared nanofluids passing under laminar conditions through single-pass cross-flow compact heat exchanger attached with multi-louvered fins.

     

Computed values of rotational collision number and diffusion coefficients for oxygen

Recent experimental data on thermal conductivity and viscosity are used to calculate values of rotational collision numbers and diffusion coefficients for oxygen in the temperature range 400–1600 K.     

Plasma analysis of celiprolol by HPTLC: a useful technique for pharmacokinetic studies

A rapid and sensitive high performance, thin-layer chromatographic (HPTLC) method has been developed for the measurement of celiprolol in human plasma and its use in pharmacokinetic studies has been evaluated. Detection and quantitation were performed without using an internal standard. A simple extraction procedure was followed for extracting celiprolol from plasma and a known amount of the extract was spotted on precoated silica gel 60 F254 plates using a Camag Linomat IV autosampler. Celiprolol was quantitated using a Camag TLC Scanner 3. The average recovery of authentic analytes (20 to 200 ng/mL) added to plasma was 72.06 +/- 2.8% and the lowest amount of celiprolol that could be detected was 10 ng/mL. The method provides a direct estimate of the amount of celiprolol present in plasma. Pharmacokinetic parameters of 2 marketed preparations have also been determined after oral administration to 12 healthy human volunteers.