Stability and electronic properties of carbon in α-Al2O3

The stability and electronic properties of carbon in α-Al₂O₃ are investigated using density functional theory. In the host lattice, the substitutional C prefers the Al site under the O-rich conditions, whereas the O site is preferred by carbon under the Al-rich conditions. The calculated results predict a direct relationship between the thermodynamic and optical transition levels with the degree of the local distortion induced by C in the alumina lattice. We also find C at the O site acts as a charge compensator to stabilize the F⁺ center, thereby enhancing the TL signal at 465 K. Also, C at Al site can serve as electron traps for TL emission process in α-Al₂O₃.     

Growth mechanism and optical property of CdS nanoparticles synthesized using amino-acid histidine as chelating agent under sonochemical process

Using amino-acid histidine as chelating agent, CdS nanoparticles have been synthesized by sonochemical method. It is found that by varying the ultrasonic irradiation time, we can tune the band gap and particle size of CdS nanoparticles. The imidazole ring of histidine captures the Cd ions from the solution, and prevents the growth of the CdS nanoparticles. The deviation in the linear relation in between cube of radius of nanoparticles and ultrasonic irradiation time confirms the growth of CdS nanoparticles occur via two process; one is the diffusion process of the reactants as well as reaction at the surface of the crystallite. CdS nanoparticles synthesized using histidine as organic chelating agent have band edge emission at 481 nm and have greater photoluminescence intensity with blue-shift to higher energy due to typical quantum confinement effect.     

Magnetic and magneto-transport properties of double perovskite Ba2−xSrxFeMoO6 system

The structural magnetic and magneto-transport properties of double perovskite system Ba_2−xSr_xFeMoO₆ (0?x?1.0) prepared in bulk polycrystalline form are reported in this paper. X-ray diffraction analysis showed that samples are single phase and the lattice constants decreases with increase in the Sr content. The degree of Fe-Mo ordering has been found decreasing in the series with an increase in the Sr content. Parent compound Ba₂FeMoO₆ exhibits saturation magnetic moment value of 3.54 μ_B/f.u. at 85 K in a magnetic field of 6000 Oe. Temperature dependence of resistivity shows metallic behavior for all the samples. The magneto-resistance (MR) of the compound with x=0.4 is higher than that of the other samples. At room temperature this system shows a saturation magnetization value of 1.73 μ_B/f.u. and MR value of 7.08% (1 T). The observed variations in the structural and magnetic properties are attributed to the change of chemical pressure due to the substitution of Sr in place of Ba. The effect of antisite disorder (ASD) defects on magneto-transport properties is studied in more detail.     

Comparative molecular field analysis and comparative molecular similarity indices analysis of hydroxyethylamine derivatives as selective human BACE-1 inhibitor

Three-dimensional quantitative structure–activity relationship (3D-QSAR) models were developed based on comparative molecular field analysis (CoMFA) and comparative molecular similarity indices analysis (CoMSIA), on a series of 43 hydroxyethylamine derivatives, acting as potent inhibitors of β-site amyloid precursor protein (APP) cleavage enzyme (BACE-1). The crystal structure of the BACE-1 enzyme (PDB ID: 2HM1) with one of the most active compound 28 was available, and we assumed it to be the bioactive conformation of the studied series, for 3D-QSAR analysis. Statistically significant 3D-QSAR model was established on a training set of 34 compounds, which were validated by a test set of 9 compounds. For the best CoMFA model, the statistics are, r ² =  0.998, r²_cv = 0.810{r^{2}_{\rm cv} = 0.810} , n =  34 for the training set and r²_pred = 0.934{r^{2}_{\rm pred} = 0.934} , n = 9 for the test set. For the best CoMSIA model (combined steric, electrostatic, hydrophobic, and hydrogen bond donor fields), the statistics are r ² =  0.978, r²_cv = 0.754{r^{2}_{\rm cv} = 0.754} , n =  34 for the training set and r²_pred = 0.750{r^{2}_{\rm pred} = 0.750} , n =  9 for the test set. The resulting contour maps, produced by the best CoMFA and CoMSIA models, were used to identify the structural features relevant to the biological activity in this series of analogs. The data generated from the present study will further help to design novel, potent, and selective BACE-1 inhibitors.     

On a finite difference scheme for Burgers’ equation

In this paper we study properties of numerical solutions of Burger’s equation. Burgers’ equation is reduced to the heat equation on which we apply the Douglas finite difference scheme. The method is shown to be unconditionally stable, fourth order accurate in space and second order accurate in time. Two test problems are used to validate the algorithm. Numerical solutions for various values of viscosity are calculated and it is concluded that the proposed method performs well.     

A Class of Charged Relativistic Superdense Star Models

In this article we obtain a new class of well behaved charged solutions by using particular forms of the metric potential g ₄₄ and electric intensity, which involves a parameter K. The metric describing the superdense stars joins smoothly with the Reissner-Nordstrom metric at the pressure free boundary. This class of solutions describes well behaved charged fluid balls. The class of solutions gives range of parameter K (0.13≤K≤1.9999) for which the solution is well behaved hence, suitable for modeling of super dense star. The interior of the stars possess there energy density, pressure, pressure-density ratio and velocity of sound to be monotonically decreasing towards the pressure free interface. In view of the surface density 2×10¹⁴ gm/cm³, the maximum mass of the charged fluid balls and corresponding radius are 0.4711M _Θ and 7.0122 km. The red shift at the centre and boundary are found to be 0.1640 and 0.1100 respectively.     

Synthesis and computational studies of potent antimicrobial and anticancer indolone scaffolds with spiro cyclopropyl moiety as a novel design element

The indolones nucleus is the central core to develop new effective anticancer agents and its substitution at the 3-position can affect antitumor activity, 3-spirocyclopropyl-2-oxindoles have attracted the scientist's community to design and develop expedition's strategies towards their construction and explore the potential of this useful scaffold with their newer derivatives in medicinal world. The present paper describes the synthesis of 3-spirocyclopropyl-2-indolone derivatives in three steps via synthesis of ylide leading to methylene-indolinones followed by the formation of the final product spirocyclopropyl oxindole derivatives with improved yields. In this milieu we considered motivating to advance exploration the biological potencies and computational studies of our newly synthesized molecules. The aimed target molecules were screened for antimicrobial and anticancer activities where they exhibited substantial effective antimicrobial activities. Amongst them, potent compound, bromospirocyclopropyl indolone, 6d displayed encouraging MIC ranging from 0.007 to 0.49 μg/mL for gram positive microbes and also substantial anticancer activity with an IC₅₀ of 11.5 μg/mL. Finally, the computational modelling studies were performed to explore structure-activity relationship analysis. Active site of receptor protein shows docking scores of these molecules as - 5.78 kcal/mol and ?5.097 kcal/mol for the docked target proteins. The binding energy of the best score is found to be ?41.67 kcal/mol to ?44.67 kcal/mol. Thus, the present paper efficaciously validated spirocyclopropyl indolone framework for drug candidates as potent anticancer as well as antimicrobial compounds.     

Synthesis and Characterization of PANI/ZnO Nanocomposites

This paper presents our results on the successful fabrication of HCl‐doped polyaniline (PANI)/ZnO nanocomposites via an electrochemical synthesis route. Different weight percents of ZnO nanoparticles were uniformly dispersed in the PANI matrix. The interaction between the dispersed ZnO nanoparticle and PANI was studied using X‐ray diffraction, ultraviolet–visible absorption spectroscopy, photoluminescence (PL) spectroscopy, X‐ray photoelectron spectroscopy, atomic force microscopy, thermogravimetry, and transmission electron microscopy. It is shown that the doping state of the PANI/ZnO nanocomposite is highly improved as compared to that of PANI. The dispersed PANI/ZnO nanocomposites exhibit enhanced PL behavior and thermal stability.     

Zinc oxide nanoparticles-chitosan composite film for cholesterol biosensor

Zinc oxide nanoparticles (NanoZnO) uniformly dispersed in chitosan (CHIT) have been used to fabricate a hybrid nanocomposite film onto indium-tin-oxide (ITO) glass plate. Cholesterol oxidase (ChOx) has been immobilized onto this NanoZnO-CHIT composite film using physiosorption technique. Both NanoZnO-CHIT/ITO electrode and ChOx/NanoZnO-CHIT/ITO bioelectrode have been characterized using Fourier transform-infrared (FTIR), X-ray diffraction (XRD), cyclic voltammetry (CV), scanning electron microscopy (SEM) and electrochemical impedance spectroscopy (EIS) techniques, respectively. The ChOx/NanoZnO-CHIT/ITO bioelectrode exhibits linearity from 5 to 300 mg dl⁻¹ of cholesterol with detection limit as 5 mg dl⁻¹, sensitivity as 1.41 × 10⁻⁴ A mg dl⁻¹ and the value of Michaelis-Menten constant (K_m) as 8.63 mg dl⁻¹. This cholesterol biosensor can be used to estimate cholesterol in serum samples.     

Photosensitizers derived from 132-oxo-methyl pyropheophorbide-a: enhanced effect of indium(III) as a central metal in in vitro and in vivo photosensitizing efficacy

The effects of an additional keto group on absorption wavelength and the corresponding metal complexes Zn(II), Cu(II) In(III) on singlet oxygen production and photodynamic efficacy were examined among the alkyl ether analogs of pyropheophorbide-a. For the preparation of the desired photosensitizers, the methyl 13(2)-oxo-pyropheophorbide-a obtained by reacting methyl pyropheophorbide-a with aqueous LiOH-THF was converted into a series of alkyl ether analogs. These compounds were evaluated for photophysical properties and in vitro (by means of the MTT assay and intracellular localization in RIF cells) and in vivo (in C3H mice implanted with RIF tumors) photosensitizing efficacy. Among the alkyl ether derivatives, the methyl 3-decyloxyethyl-3-devinyl-13(2)-oxo-pyropheophorbide-a was found to be most effective and the insertion of In(III) into this analog further enhanced its in vitro and in vivo photosensitizing efficacy. Fluorescence microscopy showed that, in contrast to the hexyl and dodecyl ether derivatives of HPPH (which localize in mitochondria and lysosomes, respectively), the diketo-analogs and their In(III) complexes localized in Golgi bodies. The preliminary in vitro and in vivo results suggest that, in both free-base and metalated analogs, the introduction of an additional keto group at the five-member exocyclic ring in pyropheophorbide-a diminishes its photosensitizing efficacy. This may be due to a shift in subcellular localization from mitochondria to the Golgi bodies. The further introduction of In(III) enhances photoactivity, but not by shifting the localization of the photosensitizer.