电气线路互联系统线缆抗高空核电磁脉冲耦合效应

高空核电磁脉冲（HEMP）对电子设备的耦合途径主要有两方面：一方面是通过装备（产品）上的天线耦合通道进入到电子系统内的“前门耦合”方式;另一方面则是“后门耦合”,即通过装备（产品）上的壳体、电源线、电缆、机箱的缝隙、孔洞等途径进行耦合。主要研究电气线路互联系统(EWIS)线缆抗高空核电磁脉冲耦合效应,通过研究HEMP干扰的特征、能量分布,搭建HEMP数学模型,采用控制变量法,改变EWIS线缆类型、离地高度等要素,通过在CST上建立仿真模型以及开展试验,分析HEMP对电子设备造成的影响程度,得到HEMP耦合效应的一般性结论与规律。     

正火和回火处理过程中W/Fe/RAFM钢接头W/Fe界面组织和剪切性能的演化

对热等静压(HIP)扩散焊制备的W/Fe/RAFM钢接头进行了正火和回火处理,以恢复其中RAFM钢的组织和性能.采用电子探针微分析器(EPMA)和掠入射X射线衍射(GIXRD)对W/Fe界面组织的演化进行了分析,采用剪切测试和扫描电镜(SEM)对接头连接性能的演化进行了测试和分析.结果表明,正火处理后,RAFM钢中的C...     

液态Sn-Cu钎料的黏滞性与润湿行为研究

金属熔体的黏度和表面张力都是与液态结构相关的敏感物理性质, 且存在一定的相互关系. 对于微电子封装材料而言, 黏度和表面张力均是影响其工艺性能的重要参量. 本文利用回转振动式高温熔体黏度仪测量了Sn-xCu (x = 0.7, 1.5, 2)钎料熔体在不同温度下的黏度值, 发现在一定温度范围内钎料熔体的黏度值存在突变, 可划分为低温区和高温区. 在各温区内, 黏温关系很好地符合Arrhenius方程, 在此基础上讨论了液态钎料的结构特征和演变规律. 同时, 利用黏度值计算了液态Sn-xCu钎料在相应温度下的表面张力, 并通过Sn-xCu钎料在Cu基板上的润湿铺展实验对计算结果进行验证. 结果显示, 润湿角和扩展率的测试结果与表面张力的计算结果具有很好的一致性, 表明通过熔体黏度值来计算锡基二元无铅钎料合金表面张力并评估其润湿性能的方法是可行的. 关键词： Sn-Cu钎料 黏度 表面张力 润湿性     

Imbert–Fedorov shifts of a Gaussian beam reflected from uniaxially anisotropic chiral media

We study the Imbert–Fedorov (IF) shifts of a reflected Gaussian beam from uniaxially anisotropic chiral media (UACM), where the chirality appears only in one direction and the host medium is a uniaxial crystal or an electric plasma. The numerical results are presented for three kinds of UACM, respectively. It is found that the IF shifts are closely related to the propagation properties of the two eigenwaves in the UACM. In general, when either of the eigenwaves is totally reflected, the IF shifts can change abruptly near the critical angle. The cross-polarized reflection coefficient has a greater effect on the spatial IF (SIF) shift than on the angular IF (AIF) shift, and the sign of the AIF shift depends mainly on that of the difference between the co-polarized reflectivity. By designing artificially the electromagnetic parameters of the UACM, we can control the IF shifts and acquire their more abundant properties.     

Designing and Characterization of Biodegradable Multiblock Poly(L-Lactic Acid)/Polybutadiene Elastomers

A series of poly(L-lactic acid)/polybutadiene (PLA/PB) biodegradable multiblock elastomers was synthesized and characterized. A two-step process to prepare PLA/PB multiblock elastomers was applied. Melt polymerization was used to prepare poly(L-lactic acid) (PLA) terminated with hydroxyl groups and, at the same time, hydroxyl-terminated polybutadiene (HTPB) and 1,6-hexamethylene diisocyanate (HDI) were employed to synthesize diisocyanate-terminated polybutadiene (ITPB). Then, PLA and ITPB were reacted with different PLA/PB weight ratios. Consequently, a series of PLA/PB biodegradable poly(ester-urethane)s with crosslinked chains was obtained. Swelling characteristics and crosslink density of the crosslinked elastomer were investigated. DMA was applied to characterize its thermal properties. The measurement of mechanical properties showed that a PLA/PB elastomer with adjustable mechanical properties was synthesized. Micromorphology, hydrophobicity, and degradability of the material were also characterized.     

Variations in the Concentrations of Cu and Zn and in the Ratio of Cu to Zn in Whole Blood and Hair Samples from Hepatocellular Carcinoma Patients and from Healthy Controls in Taiwan

An atomic absorption spectrophotometer was used to determine concentrations of copper and zinc and the ratio of Cu to Zn in samples of whole blood and hair from hepatocellular carcinoma (HCC) patients (n=51) and from healthy controls (n=50) in Taiwan. Our results indicate that the HCC patients have higher copper concentrations and higher ratios of Cu to Zn than do the healthy controls both in whole blood and hair samples, but only the concentration of copper and the ratio of Cu to Zn in whole blood were significantly different (p<0.001 and p<0.05). Conversely, a lower concentration of zinc was found in whole blood and hair samples of HCC patients. Similarly, only the concentration of zinc in whole blood showed a significant difference (p<0.001). We concluded that the whole blood concentrations of copper and zinc and the ratio of Cu to Zn seemed to have a higher correlation with HCC. Thus, we suggest that a sample of whole blood may be a more suitable diagnostic sample than is a hair sample for HCC.     

Theoretical investigation of the spin-Hamiltonian parameters and optical spectra for the doped Cu2+ in ZnCdO nanopowder

The spin-Hamiltonian (SH) parameters (g factors g_||, g_⊥ and hyperfine structure constants A_||, A_⊥) and d–d transitions for ZnCdO:Cu²⁺ are calculated based on the perturbation formulas for a 3d⁹ ion in tetragonally elongated octahedra. Good agreement between the calculated results (four SH parameters and three optical absorption bands) and the experimental results can be obtained. Since the SH parameters are sensitive to the local structure of a paramagnetic impurity center, the tetragonal distortion (characterized by the relative elongation ratio ρ ≈ 3.5% along the C₄ axis) of the impurity center due to the Jahn–Teller effect is also acquired from the calculations. The negative and positive signs of hyperfine structure constants A_|| and A_⊥ for ZnCdO:Cu²⁺, respectively, are also suggested in the discussions.     

Investigation of the Kinetics of Curing Reaction for the Resin Matrix Polymer Composite Based on Near-Infrared Spectroscopy

Abstract

Near-infrared (NIR) spectroscopy is a rapid and nondestructive method for the simultaneous measurement of different constituents in resin matrix polymer composites. This strategy has been applied in the synthesis of resin matrix polymer composites. In this article, we mainly review the control of curing reaction kinetics of the phenolic, epoxy resin, polyester resin, polyurethane, and other polymer resin based on NIR spectra, which is important to control the quality of the resin matrix polymer composites during synthesis.     

Rates of diffusion controlled reactions for one-dimensionally-moving species in 3D space

ABSTRACT

The asymmetry in diffusion dimensionality between self-interstitial atom (SIA) clusters and vacancies is a fundamental feature of irradiation damage in crystals, leading to a defect buildup imbalance that manifests itself as measurable dimensional and mechanical property changes. It is well known that, while vacancies and mobile vacancy clusters diffuse in a three-dimensional (3D) fashion, SIA clusters perform one-dimensional motion along mostly rectilinear trajectories. Despite this, a complete set of kinetic coefficients, including coagulation reaction rates and sink strengths, does not exist for 1D-moving objects. In this paper, we derive analytical expressions for these coefficients from continuum diffusion theory particularised to 1D motion. Moreover, we carry out kinetic Monte Carlo simulations of numerical replicas of the geometry of diffusing particles and sinks to validate the proposed solutions. Our simulations, which are conducted entirely independently from the analytical derivations, reveal excellent agreement with the proposed expressions, adding confidence to their validity. We compare the 1D and 3D cases and discuss their relevance for kinetic codes for damage accumulation calculations.