Determination of Malathion Using Corona Discharge – Ion Mobility Spectrometry with Solid-Phase Microextraction

A corona discharge (CD) ion mobility spectrometer combined with solid-phase microextraction was constructed. The detection limit and stability of the system for malathion detection were improved using a novel sample introduction port through which the sample desorption was performed in high-temperature drift tube and the sample was introduced directly to the ionization area. The working parameters of the distance between CD needle tip and carrier gas outlet, the drift tube and carrier gas temperature, the carrier gas flow, and the voltage on CD needle were selected. When the extraction time for standard malathion was set to 5?min, the detection limit was 0.96?µg?L^?1 based on thrice the baseline noise, the linear range was 50–500?µg?L^?1, the correlation coefficient was approximately 0.9941, and the relative standard deviation was below 10%. Malathion-spiked lake water samples were analyzed using the developed system and the recovery was 92–102%. This method is suitable for the rapid detection of organophosphorus pesticide residues.     

A Comparative Study of Electron Heat Transport in a Stochastic and a Non‐Stochastic Magnetic Field

We studied the electron heat transport across a non‐local stochastic magnetic field and a non‐local non‐stochastic magnetic field in tokamak plasmas. Analytical results and numerical simulation results were compared with conditions of a stochastic and a non‐stochastic magnetic field respectively in this article. Parameter of stochasticity in perturbed magnetic field was found not tobe a key factor in influencing effective radial heat conductivity in radial direction of tokomak when Chirikov parameter is close to one (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Laser absorption-scattering technique applied to asymmetric evaporating fuel sprays for simultaneous measurement of vapor/liquid mass distributions

This paper describes an Ultraviolet-Visible Laser Absorption-Scattering (UV-Vis LAS) imaging technique applied to asymmetric fuel sprays. Continuing from the previous studies, the detailed measurement principle was derived. It is demonstrated that, by means of this technique, cumulative masses and mass distributions of vapor/liquid phases can be quantitatively measured no matter what shape the spray is. A systematic uncertainty analysis was performed, and the measurement accuracy was also verified through a series of experiments on the completely vaporized fuel spray. The results show that the Molar Absorption Coefficient (MAC) of the test fuel, which is typically pressure and temperature dependent, is the major error source. The measurement error in the vapor determination has been shown to be approximately 18% under the assumption of constant MAC of the test fuel. Two application examples of the extended LAS technique were presented for exploring the dynamics and physical insight of the evaporating fuel sprays: diesel sprays injected by group-hole nozzles and gasoline sprays impinging on an inclined wall.     

Distinct magnetic properties of one novel type of nanoscale cobalt-iron Prussian blue analogues synthesized in microemulsion

One novel type of nanoscale cobalt-iron Prussian blue analogues (PBA) in the form of mixed nanorods and nanocubes were synthesized using cetyltrimethyl ammonium bromide (CTAB) as the surfactant in microemulsion at low temperature. The generated products were characterized by SQUID, XRD and IR techniques, etc. The effects of potassium contents, cobalt-to-iron ratios, reaction temperatures on the properties of the nanoscale cobalt-iron PBA were systematically explored. The results showed that the novel type of nanomaterials possessed distinct magnetic properties in that their coercivities were intensely dependent on cobalt-to-iron ratios and potassium contents. Furthermore, it was observed that low reaction temperature not only affected the morphologies of the products, but also had influence on their magnetic properties. Additionally, the cobalt-iron Prussian blue analogues were strongly influenced by CTAB around their surface, which led to higher Curie temperatures.     

Discontinuous crack-bridging model for fracture toughness analysis of nacre

Studying the structure–property relation of biological materials can not only provide insight into the physical mechanisms underlying their superior properties and functions but also benefit the design and fabrication of advanced biomimetic materials. In this paper, we present a microstructure-based fracture mechanics model to investigate the toughening effect due to the crack-bridging mechanism of platelets. Our theoretical analysis demonstrates the crucial contribution of this mechanism to the high toughness of nacre. It is found that the fracture toughness of nacre exhibits distinct dependence on the sizes of platelets, and the optimized ranges for the thickness and length of platelets required to achieve higher fracture toughness are given. In addition, the effects of such factors as the mechanical properties of the organic phase (or interfaces), the effective elastic modulus of nacre, and the stacking pattern of platelets are also examined. Finally, some guidelines for the biomimetic design of novel materials are proposed based on our theoretical analysis.     

An improved Pfitzinger reaction: Eco-efficient synthesis of quinaldine-4-carboxylates by TMSCl-mediated

We report herein an improved Pfitzinger reaction for the synthesis of highly functionalized quinaldines from 1,3-dicarbonyl compounds, isatins and alcohols mediated by TMSCl. This synthesis involves cyclization and esterification in one-step cascade process for the formation of a carboxylate (CO₂R) at the 4-position of quinaldine ring. Moreover, this procedure shows highly efficient, good functional group tolerance, operational simplicity, environment-friendly and feasibility of scale up.     

Comparative XPS study between experimentally and naturally weathered pyrites

A comparative study has been carried out between experimentally and naturally weathered pyrites. Both were found to share similar species of weathering products and a similar weathering mechanism. The weathering products could be divided into sulphur-bearing or iron-bearing groups. The sulphur-bearing group was comprised of sulphate, sulphite, thiosulphate, elemental sulphur, polysulphide, and mono-sulphide. The iron-bearing group was comprised of goethite, hematite or magnetite, and iron sulphate. The weathering structural profile was also similar for both types of weathering, being composed of a surficial layer and a transitional layer. The surficial layer was made up of both the sulphur-bearing and the iron-bearing products, while the transitional layer was comprised of goethite, and hematite or magnetite. The inward migration of the weathering interface was stimulated by the diffusion of oxygen and moisture. The oxygen was considered to preferably squeeze the iron to form goethite, and the ferric ions of goethite to have acted as a bridge for electron transfer between the oxygen and bulk S₂²⁻ and Fe²⁺ of pyrite.     

基于配体结构的Grb2-SH2抑制剂的结构优化:更高的活性、更少的电荷、更低的肽性

生长因子受体结合蛋白2(Grb2)在致癌基因Ras活化的信号传导通路中起着关键作用,目前被广泛认为是抗肿瘤药物设计的优秀靶标.对Grb2-SH2抑制剂的研究进展进行了综述,主要针对关键残基磷酸酪氨酸的高电荷性和多肽结构的低生物相容性两个缺陷,基于天然配体与Grb2-SH2相互作用的结构特征,围绕提高活性和简化结构开展的系统构效关系和合理结构优化研究,为进一步开发磷酸酪氨酸介导的Grb2-SH2抑制剂成为新型抗肿瘤药物提供结构和理论基础.