Formation and Fate of Formaldehyde in Methanol-to-Hydrocarbon Reaction: In Situ Synchrotron Radiation Photoionization Mass Spectrometry Study

HCHO has been confirmed as an active intermediate in the methanol-to-hydrocarbon (MTH) reaction, and is critical for interpreting the mechanisms of coke formation. Here, HCHO was detected and quantified during the MTH process over HSAPO-34 and HZSM-5 by in situ synchrotron radiation photoionization mass spectrometry. Compared with conventional methods, excellent time-resolved profiles were obtained to study the formation and fate of HCHO, and other products during the induction, steady-state reaction, and deactivation periods. Similar formation trends of HCHO and methane, and their close correlation in yields suggest that they are derived from disproportionation of methanol at acidic sites. In the presence of Y₂O₃, the amount of HCHO changes, affecting the hydrogen-transfer processes of olefins into aromatics and aromatics into cokes. The yield of HCHO affects the aromatic-based cycle and the formation of ethylene, indicating that ethylene is mainly formed from the aromatic-based cycle.     

Efficient Screening for Ternary Molecular Ionic Cocrystals Using a Complementary Mechanosynthesis and Computational Structure Prediction Approach

The discovery of molecular ionic cocrystals (ICCs) of active pharmaceutical ingredients (APIs) widens the opportunities for optimizing the physicochemical properties of APIs whilst facilitating the delivery of multiple therapeutic agents. However, ICCs are often observed serendipitously in crystallization screens and the factors dictating their crystallization are poorly understood. We demonstrate here that mechanochemical ball milling is a versatile technique for the reproducible synthesis of ternary molecular ICCs in less than 30 min of grinding with or without solvent. Computational crystal structure prediction (CSP) calculations have been performed on ternary molecular ICCs for the first time and the observed crystal structures of all the ICCs were correctly predicted. Periodic dispersion-corrected DFT calculations revealed that all the ICCs are thermodynamically stable (mean stabilization energy=−2 kJ mol⁻¹) relative to the crystallization of a physical mixture of the binary salt and acid. The results suggest that a combined mechanosynthesis and CSP approach could be used to target the synthesis of higher-order molecular ICCs with functional properties.     

Filling a Gap: The Coordinatively Saturated Group 4 Carbonyl Complexes TM(CO)8 (TM=Zr,Hf) and Ti(CO)7

Homoleptic Group 4 metal carbonyl cation and neutral complexes were prepared in the gas phase and/or in solid neon matrix. Infrared spectroscopy studies reveal that both zirconium and hafnium form eight-coordinate carbonyl neutral and cation complexes. In contrast, titanium forms only the six-coordinate Ti(CO)₆⁺ and seven-coordinate Ti(CO)₇. Titanium octacarbonyl Ti(CO)₈ is unstable as a result of steric repulsion between the CO ligands. The 20-electron Zr(CO)₈ and Hf(CO)₈ complexes represent the first experimentally observed homoleptic octacarbonyl neutral complexes of transition metals. The molecules still fulfill the 18-electron rule, because one doubly occupied valence orbital does not mix with any of the metal valence atomic orbitals. Zr(CO)₈ and Hf(CO)₈ are stable against the loss of one CO because the CO ligands encounter less steric repulsion than Zr(CO)₇ and Hf(CO)₇. The heptacarbonyl complexes have shorter metal−CO bonds than that of the octacarbonyl complexes due to stronger electrostatic and covalent bonding, but the significantly smaller repulsive Pauli term makes the octacarbonyl complexes stable.     

La3B6O13(OH): The First Acentric High-Pressure Borate Displaying Edge-Sharing BO4 Tetrahedra

La₃B₆O₁₃(OH) was obtained by a high-pressure/high-temperature experiment at 6 GPa and 1673 K. The compound crystallizes in the space group P2₁ (no. 4) with the lattice parameters a=4.785(2), b=12.880(4), c=7.433(3) Å, and β=90.36(10)°, and is built up of corner- as well as edge-sharing BO₄ tetrahedra. It represents the first acentric high-pressure borate containing these B₂O₆ entities. The compound develops borate layers of „sechser“-rings with the La³⁺ cations positioned between the layers. Single-crystal and powder X-ray diffraction, vibrational and MAS NMR spectroscopy, second-harmonic generation (SHG) and thermoanalytical measurements, as well as computational methods were used to affirm the proposed structure and the B₂O₆ entities.     

高碳铬铁在氢氧化钠水溶液中电化学氧化过程

铬铁电化学氧化法是一种新的制备铬酸钠的方法,然而高碳铬铁在NaOH水溶液中的电化学氧化过程尚不明确。 采用循环伏安法(CV)、稳态极化法(LSV)等电化学测试方法对金属铬、高碳铬铁在NaOH水溶液中的电化学氧化过程进行研究,通过扫描电子显微镜(SEM)、能量散射谱(EDS)和X射线光电子能谱(XPS)对高碳铬铁电解后固相产物表征,判断固相产物的组成。 结果表明,高碳铬铁不同于金属铬的电氧化过程,它在NaOH溶液中通过Cr(0)→Cr(Ⅵ)的电氧化方式生成铬酸钠,中间产物Cr(OH)₃和Fe(0)发生电化学反应生成稳定的FeCr₂O₄。 随着NaOH浓度的增加,电势较低时,受高碳铬铁中Fe(0)的影响,高碳铬铁容易在NaOH水溶液中发生钝化;当电势足够正时,钝化膜溶解,生成铬酸钠、氢氧化铁和亚铬酸亚铁,同时,阳极表面有氧气析出。 高碳铬铁电化学氧化制备铬酸钠的适宜条件:碱浓度≥2 mol/L,阳极电势≥1.6 V(vs.SCE)。     

光电催化二氧化碳还原研究进展

CO_2是最常见的化合物,作为潜在的碳一资源,可用于制备多种高附加值的化学品,如一氧化碳、甲烷、甲醇、甲酸等。传统的热催化转化CO_2方法能耗高,反应条件苛刻。因此,如何在温和条件下高效地将CO_2转化成高附加值的化学品,一直以来是催化领域的研究热点和难点之一。光催化技术反应条件温和、绿色环保。然而,纯光催化反应普遍存在太阳能利用效率有限,光生载流子分离效率低等问题。针对上述问题,在光催化的基础上引入电催化,可以提高载流子的分离效率,在较低的过电位下,实现多电子、质子向CO_2转移,从而提高催化反应效率。总之,光电催化技术可以结合光催化和电催化的优势,提高CO_2催化还原反应效率,为清洁、绿色利用CO_2提供了一种新方法。本文依据光电催化CO_2还原反应基本过程,从光吸收、载流子分离和界面反应等三个角度综述了光电催化反应的基本强化策略,并对未来可能的研究方向进行了展望。     

可持续高分子-纤维素新材料研究进展

21世纪"绿色"化学已成为世界各国社会经济发展中的研究与开发战略方向.纤维素是自然界中储量最丰富的天然高分子,是重要的可再生资源以及未来的主要工业原料.然而由于纤维素存在着大量的分子内以及分子间氢键,其结构致密,难以溶解或熔融进一步加工.本文简要介绍了近几年来关于直接使用物理溶剂方法(非衍生化)对纤维素材料开发利用的新进展,主要包括以下4个方面:(1)纤维素在"绿色"溶剂-碱/尿素以及离子液体体系中的溶解和再生;(2)纳米纤维素的制备以及组装;(3)木材纳米技术的开发及利用;(4)细菌纤维素基材料等,旨在推进"绿色"技术实现纤维素资源的研究开发及利用.     

浅谈制药工程专业有机化学实验教学的心得和体会——以三苯甲醇的制备和重结晶实验为例

有机化学实验是制药工程专业的一门必修课,旨在训练学生有机合成基本实验技能。本文以三苯甲醇的制备和重结晶实验为例,讲述了笔者在多年教学中获得的一点感悟和经验:1)将实验步骤分解成片断讲解可以使学生更好地理解和记忆实验过程和操作目的;2)重要的基本操作应反复练习,即"学习、复习、提高",通过三次重复练习来实现巩固和熟练掌握该操作的目的。     

基于手机光线传感器为检测器的简易光度计的自组装设计

By using light sensors of the cellphone, we build a simple photometer which can be used in quantitative analysis experiments. We have performed 5 replicate measurements of iron with phenanthroline to verify reproducibility and stability. We find the absorbance of the sample has a good linear relationship with the concentrations of iron with a R² value around 0.999 and the RSD of 2.81%. The result is 4.94 μg·mL^-1 with spectrophotometer and 5.11 μg·mL^-1 with our photometer. The photometer is simple, convenient, accurate and realistic by using a phone as detector, which can replace the traditional spectrophotometer in the laboratory class. The students can enhance their understanding of the structure and principle of spectrophotometer by the DIY photometer experiment.     

利用自由基引发的1,2-炔基迁移实现非活性烯烃的炔膦酰化

研究了1,4-烯炔衍生物与二芳基膦氧化物在银介导下发生的炔酰化反应.该反应利用自由基引发的1,2-炔基迁移策略合成了一系列γ-酮膦氧化物,产率适中.该反应机理可能涉及膦中心自由基与乙烯基的加成、3-exo-dig环化和1,2-炔基迁移等连续的过程,一步形成了C-P、C-C键等化学键,实现了非活性烯烃的双官能化.