改性活性炭对土壤镉的吸附性影响

目的研究3种改性活性炭对菜地、河流底泥、荷花底泥镉吸附性的影响。方法对活性炭进行酸改性、碱改性和氧化改性,采用双硫腙分光光度法测定镉含量。结果对实验土样,最佳活性炭添加量为0.025 g/g。随着初始镉含量的升高,土壤对镉的吸附量不断增大。结论 3种改性活性炭相比普通活性炭对湿地土壤的镉吸附量均有不同程度的提升,荷花底泥中,酸性、氧化改性活性炭相比普通活性炭,吸附效果提高7.7%,8.3%,吸附效果提升显著。     

自动固相萃取-液相色谱-串联质谱法同时测定血液中5种抗抑郁类药物

建立了血液中5种抗抑郁类药物的自动固相萃取-液相色谱-串联质谱(ASPE-LC-MS/MS)分析方法。样品经HLB固相萃取柱提取后,采用LC-MS/MS进行测定,外标法定量。在Waters AtlantisTM dC18反相柱上分离,梯度洗脱,流动相为甲醇-0.1%甲酸(1∶4,V/V)溶液,质谱采集为电喷雾正离子多反应监测模式。采用基质匹配标准溶液校正,5种目标物在1~500μg/L范围内具有良好的线性关系,相关系数(R)大于0.9975,检出限在0.1~0.6μg/L之间;添加浓度水平为10,100和500μg/L时,方法回收率为70.6%~93.8%,相对标准偏差在3.9%~9.2%之间。本方法可用于血液中5种抗抑郁类药物的法庭与临床毒物分析。     

聚集态的Fe氧化物在Fe/ZSM-5催化N_2O直接分解中的作用(英文)

研究了以离子交换法制备的Fe/ZSM-5上聚合态的Fe氧化物(FeOx)在催化N2O直接分解中的作用.Fe/ZSM-5催化剂利用600–900 ℃的高纯Ar处理,使催化剂中的FeOx发生聚合.利用一系列的表征手段(XRD,BET,DRIFTS,UV/vis-DRS,XAFS,N2O脉冲和O2-TPD)对催化剂进行了表征.结果发现,分子筛骨架外的FeOx在Fe/ZSM-5催化N2O分解中起重要作用;通过研究高温处理的Fe/ZSM-5催化剂中不同FeOx的比例与催化剂活性的关系,得到多核的FeOx是催化N2O分解的主要活性物种;并且,无定形态的FeOx中键长较长的Fe–O键((Fe–O)2)是参与反应的重要物种.     

NH3选择性还原NOx技术在重型柴油车尾气净化中的应用

基于实验室对柴油车用V₂O₅-WO₃/TiO₂催化剂配方以及涂覆成型技术的大量研究,设计了一条产量为6000只/月的NH₃选择性催化还原NO_x （NH₃-SCR）催化剂中试生产线,并对生产的催化剂产品进行了发动机台架测试. 结果表明,实验室制备的V₂O₅-WO₃/TiO₂粉体催化剂和生产线产品,在空速为50000 h^-1和200-450 ℃条件下NO_x转化率均可达80%以上;采用大尺寸堇青石载体涂覆后制备的V₂O₅-WO₃/TiO₂整体催化剂经实验室小样测试,在空速为10000-30000 h^-1和250-450 ℃条件下NO_x转化率也为80%以上. 发动机台架测试结果表明,该催化剂产品可使重型柴油机NO_x排放达到国IV标准中欧洲稳态循环（ESC）和欧洲瞬态循环（ETC）排放限值的要求. 该生产线经适当调整后也可用于生产非钒基NH₃-SCR整体催化剂,以满足未来钒基NH₃-SCR催化剂更新换代的需求.     

Synthesis,Structure and Magnetic Property of One Ni~Ⅱ Based Coordination Polymer

One new coordination polymer, [Ni(m-bix)(m-BDC)](1, m-bix = 1,3-bis(imidazol-1-ylmethyl)benzene, m-BDC = 1,3-benzenedicarboxylic acids), has been hydrothermally synthesized and structurally characterized by elemental analysis, IR, TGA and X-ray single-crystal diffraction. The green block crystal of complex 1(C22H18N4Ni O4) belongs to monoclinic system, space group P21/c with a = 10.0418(3), b = 23.8651(6), c = 8.7872(2) A, β = 112.333(3)o, V = 1947.88(9)A3, Z = 4, Dc = 1.572 g/cm3, Mr = 461.11, F(000) = 952, R = 0.0335 and w R = 0.0683 for 2827 observed reflections(I 2σ(I)). Complex 1 exhibits a novel 6-connected 3D sxd type topological framework. The magnetic characterization of complex 1 shows antiferromagnetic coupling exchange.     

A 3-fold Interpenetrated lvt Cd(Ⅱ) Network Constructed from 4-[(3-pyridyl)methylamino]benzoate Acid

A new three-dimensional(3D) coordination polymer, [Cd(L)2H2O]n·5nH2O 1 with 4-[(3-pyridyl)methylamino]benzoate acid(HL), has been synthesized by slow evaporation solvent at room temperature, and structurally characterized by elemental analysis, IR spectrum, thermal analysis, fluorescence spectrum and single-crystal X-ray diffraction. Compound 1 crystallizes in the tetragonal system, space group I-4, with a = 20.7937(16), c = 13.515(2), V = 5843.5(11) 3, C26H34CdN4O10, Mr = 674.97, Dc = 1.534 g/cm3, μ(MoKα) = 0.808 mm-1, F(000) = 2768, Z = 8, the final R = 0.0276 and wR = 0.0691 for 5323 observed reflections(I 2σ(I)). The result of thermal analysis shows that 1 is stable under 290 ℃. Moreover, it exhibits blue photoluminescence at room temperature.     

Iron-mediated AGET ATRP of styrene and methyl methacrylate using ascorbic acid sodium salt as reducing agent

Atom transfer radical polymerization of styrene(St) and methyl methacrylate(MMA) in bulk and in different solvents using activators generated by electron transfer(AGET ATRP) were investigated in the presence of a limited amount of air using FeCl3·6H2O as the catalyst, ascorbic acid sodium salt(AsAc-Na) as the reducing agent, and a cheap and commercially available tetrabutylammonium bromide(TBABr) as the ligand. It was found that polymerization in THF resulted in shorter induction period than that in bulk and in toluene for AGET ATRP of St, while referring to AGET ATRP of MMA, polymerization in THF showed three advantages compared with that in bulk and toluene: 1) shortening the induction period, 2) enhancing the polymerization rate and 3) having better controllability. The living features of the obtained polymers were verified by chain end analysis and chain-extension experiments.     

Bioconversion of Corncob Acid Hydrolysate into Microbial Oil by the Oleaginous Yeast Lipomyces starkeyi

For the first time, corncob acid hydrolysate was used for microbial oil production by the oleaginous yeast Lipomyces starkeyi. After hydrolysis by dilute sulfuric acid, corncob could turn into an acid hydrolysate with a sugar concentration of about 42.3 g/L. Detoxified by overliming and absorption with activated carbon, the corncob hydrolysate could be used by L. starkeyi efficiently that a total biomass of 17.2 g/L with a lipid content of 47.0 % (corresponding to a lipid yield of 8.1 g/L) and a lipid coefficient of 20.9 could be obtained after cultivation on the corncob hydrolysate for 8 days. Therefore, L. starkeyi is a promising strain for microbial oil production from lignocellulosic biomass. Glucose and xylose were used by L. starkeyi simultaneously during lipid fermentation while arabinose could not be utilized by it. Besides, the lipid composition of L. starkeyi was similar to that of vegetable oils; thus, it is a promising feedstock for biodiesel production.     

Enhanced Expression of GCRV VP6 in CIK Cells by Relative Sequence Optimization

Efficient expression of target protein is one of strategies for gene therapy or vaccine design. Many studies showed that codon optimization could enhance the expression of target proteins. In this paper, a target sequence of about 1.26 kb encoding the major capsid protein VP6 of grass carp reovirus (GCRV) and an optimized counterpart were synthesized and inserted into vectors for expressing VP6. The final constructs (named as pcDV6G and pcDV6YG) were transfected in Ctenopharyngodon idellus kidney (CIK) cells. The fluorescence analysis and the Western blot results showed that the gene fragment was transfected and expressed in CIK cells successfully. Although the qRT-PCR results showed no difference at the messenger RNA (mRNA) levels between the different versions of vp6 in the indicated stages, the enzyme-linked immunosorbent assay (ELISA) results showed that the protein level of VP6 expressed by pcDV6YG was higher than that by pcDV6G in the indicated hours. Taken together, these results suggest that the enhanced expression of GCRV VP6 in CIK cells by relative sequence optimization may be a good choice for making DNA vaccine against GCRV.     

Microstructure characterization of short-chain branching polyethylene with differential scanning calorimetry and successive selfnucleation/annealing thermal fractionation

A series of the copolymers of ethylene with 1-hexene(M1–M9) synthesized by metallocene catalyst Et[Ind]2ZrCl2/MAO was studied by differential scanning calorimetry and successive self-nucleation and annealing(SSA) thermal fractionation. The distribution of methylene sequence length(MSL) in the different copolymers was determined using the SSA method. The comonomer contents of samples M4 and M5 are 2.04 mol% and 2.78 mol%, respectively. Both M4 and M5 have low comonomer content and their MSL distribution profiles exhibit a monotonous increase trend with their MSL. The longest MSL of M5 is 167, and its corresponding molar percent is 43.95%, which is higher than that of M4. Moreover, the melting temperature(Tm) of M5 is also higher than that of M4. The comonomer contents of samples M7, M8, and M9 are 8.73 mol%, 14.18 mol% and 15.05 mol%, respectively. M7, M8, and M9 have high comonomer contents, and their MSL distribution profiles display unimodality. M7 has a lower peak value of 33 and a narrow MSL distribution, resulting in a Tm lower than that of M8 and M9. The MSL and its distribution are also key points that influence the melting behavior of copolymers. Sometimes, MSL and its distribution of copolymers have a greater impact on it than the total comonomer contents, which is different from traditional views.