Catalytic asymmetric syntheses of tyrosine surrogates

Amino acid esters 5-11 as tyrosine mimics have been synthesized in excellent enantioselectivity (up to 99.6% ee) and in good overall chemical yields. The key step in the sequence was the Burk's [Rh(COD)(2R,5R)-Et-DuPhos]BF4-catalyzed asymmetric hydrogenation of enamides with a variety of reactive functional groups.     

Synthesis,characterisation and phase transition studies in N-(-4-ethyloxybenzylydene)-4’-alkoxyanilines

Synthesis and characterisation are carried out in N-(-4-ethyloxybenzylidene)-4?-alkoxyanilines, 2O.Om liquid crystalline (LC) compounds with m = 3, 4 and 6–10. All the compounds exhibit monovariant nematic phase except with m = 10; the LC material shows bivariant nematic-smectic-C in addition to the nematic phase. Further, the variation in density with temperature in all these seven compounds is studied. The density and thermal expansion coefficient results reveal that the phase transitions, namely isotropic to nematic and nematic to SmC, present in these compounds show first-order nature as expected and that all the parameters show characteristic change in the vicinity of the phase transformation. The results are discussed in the light of the data available on other nO.Om compounds.     

Phase transitions from density and order parameter from polarisabilities in symmetric dimeric liquid crystals

As a part of our systematic studies on liquid crystal dimers, we present in this article the nature of phase transitions across isotropic–nematic and nematic–smectic-A exhibited by DLCs, α,ω-bis-(4-n-alkylaniline benzylidene-4?-oxy) alkanes. Further, the orientational order parameter in the nematic phase of these DLCs are estimated from the molecular polarisabilities calculated using the experimental refractive indices and density results. The molecular polarisabilities α_e and α_o are obtained for the compounds using the above results for both Vuks and Neugebauer local field models applicable to nematic liquid crystal. α_e and α_o calculated in this way are used to obtain Δα. The polarisability anisotropy in the perfect order (absolute K) is calculated semi-empirically using the δ-function model developed by Lippincott et al. and molecular vibration method. The values of polarisability anisotropy for both local electric field models differ significantly. No criterion is known to decide which value is correct. To avoid the determination of uncertain α and Δα values considering different local field models, a simple procedure developed by Kuczynski et al. was used for evaluation of S, based solely on birefringence δn = (n_e-n_o) and this value of S is compared with those obtained from field models.     

(R)-2,3-Cyclohexylideneglyceraldehyde: a novel template for simple entry into both cis- and trans-2,5-disubstituted tetrahydrofurans

Sharpless asymmetric dihydroxylation at the terminal olefin of benzoates 3a and 3b, using both AD-mix α and AD-mix β afforded only one diastereomer of diols 5a and 5b, respectively. Diols 5a and 5b were easily transformed into cis- and trans-2,5-disubstituted tetrahydrofurans 7 and 14, respectively, which were subsequently converted into known compounds 12 and 19.     

Quantitative electrochemical and electrochromic behavior of terthiophene and carbazole containing conjugated polymer network film precursors: EC-QCM and EC-SPR

A comparative analysis of the copolymerization behavior between an electro-active terthiophene and a carbazole moiety of a conjugated polymer precursor was investigated using electrochemical and hyphenated electrochemical methods. Five different precursor polymers were first synthesized and characterized using NMR, IR, and GPC. The polymers include homopolymers of individual electro-active groups (P3T, P-CBZ) and different compositions of 25, 50, and 75% (P3TC-25, P3TC50, and P3TC-75) with respect to the two electro-active groups. Since the oxidation potentials of terthiophene and carbazole lie very close to each other, highly cross-linked copolymer films of varying extent were produced depending on the composition. The copolymerization extent was found to be dependent primarily on the amount of the terthiophene, which in this case provided for a more efficient carbazole polymerization and copolymerization than with just carbazole alone (homopolymer). The extent of copolymerization, electrochromic properties, and viscoelastic changes was quantitatively investigated using a number of hyphenated electrochemistry techniques: spectro-electrochemistry, electrochemical quartz crystal microbalance studies (EC-QCM), and electrochemical surface plasmon resonance spectroscopy (EC-SPR). Each technique revealed a unique aspect of the electrocopolymerization behavior that was used to define structure-property relationships and the deposition/copolymerization mechanism.     

Organically modified silica nanoparticles co-encapsulating photosensitizing drug and aggregation-enhanced two-photon absorbing fluorescent dye aggregates for two-photon photodynamic therapy

We report energy-transferring organically modified silica nanoparticles for two-photon photodynamic therapy. These nanoparticles co-encapsulate two-photon fluorescent dye nanoaggregates as an energy up-converting donor and a photosensitizing PDT drug as an acceptor. They combine two features: (i) aggregation-enhanced two-photon absorption and emission properties of a novel two-photon dye and (ii) nanoscopic fluorescence resonance energy transfer between this nanoaggregate and a photosensitizer, 2-devinyl-2-(1-hexyloxyethyl)pyropheophorbide. Stable aqueous dispersions of the co-encapsulating nanoparticles (diameter < or = 30 nm) have been prepared in the nonpolar interior of micelles by coprecipitating an organically modified silica sol with the photosensitizer and an excess amount of the two-photon dye which forms fluorescent aggregates by phase separation from the particle matrix. Using a multidisciplinary nanophotonic approach, we show: (i) indirect excitation of the photosensitizer through efficient two-photon excited intraparticle energy transfer from the dye aggregates in the intracellular environment of tumor cells and (ii) generation of singlet oxygen and in vitro cytotoxic effect in tumor cells by photosensitization under two-photon irradiation.     

Molecularly imprinted polymer-based solid-phase extraction combined with molecularly imprinted polymer-based sensor for detection of uric acid

The development of an easy-to-use, rapid, robust and inexpensive technique is required which can measure the basal concentration of uric acid (UA) lower than 1.0 x 10(-7)M ( approximately 0.017 mgL(-1)) in biological samples to attend the problem of hypouricemia. In the present work an artificial receptor for UA, silica gel-bonded molecularly imprinted polymer (MIP), was used as a sorbent for molecularly imprinted solid-phase extraction (MISPE) in column chromatography. The use of a sensor based on a MIP-modified hanging mercury drop electrode (HMDE), as reported from our laboratory, could estimate UA with detection limit as low as 0.024 mgL(-1) under the optimized conditions of differential pulse, cathodic stripping voltammetric (DPCSV) measurement. However, in the current investigation, with the use of the combination of MISPE followed by detection with a MIP-based HMDE sensor, the minimum detectable concentration could go down to 0.0008 mgL(-1) (RSD=0.63%, S/N=3). The same MIP receptor for both MISPE and the corresponding sensor was able to enhance the preconcentration of analyte substantially so as to attain the desired level of sensitivity; and that to without any interference (cross-reactivity) from other structurally related analogues including the major interferent like ascorbic acid prevalent in the aqueous environment of biological samples.     

A new class of discotic mesogens derived from tris(N-salicylideneaniline)s existing in C3h and Cs keto-enamine forms

Two series of a unique class of columnar liquid crystals derived from tris(N-salicylideneaniline)s [TSANs] in which the proton and the electron interact with each other through the H-bonding environment are reported. The synthesis is carried out by condensing 1,3,5-triformylphloroglucinol with the respective dialkoxyanilines or trialkoxyanilines. 1H NMR and 1H-1H COSY NMR studies revealed their existence as an inseparable mixture of two keto-enamine tautomeric forms with C3h and Cs rotational symmetries instead of the expected enol-imine form. The influence of the number of peripheral alkoxy tails on the columnar mesomorphic behavior is investigated by using polarizing optical microscopy, differential scanning calorimetry, and X-ray scattering. The fluid/glassy columnar states probed for a number of representative compounds confirmed the D6h (hexagonal) or D2h (rectangular) symmetry of the columns. The electronic absorption and emission characteristics of these compounds have been studied in both mesomorphic and solution states. Of special interest, the photoluminescence spectra of solution and fluid/glassy two-dimensional structure evidently disclose the promising light generating capability of these new discotics systems.     

Seaweed Polysaccharide Based Products and Materials: An Assessment on Their Production from a Sustainability Point of View

Among the various natural polymers, polysaccharides are one of the oldest biopolymers present on the Earth. They play a very crucial role in the survival of both animals and plants. Due to the presence of hydroxyl functional groups in most of the polysaccharides, it is easy to prepare their chemical derivatives. Several polysaccharide derivatives are widely used in a number of industrial applications. The polysaccharides such as cellulose, starch, chitosan, etc., have several applications but due to some distinguished characteristic properties, seaweed polysaccharides are preferred in a number of applications. This review covers published literature on the seaweed polysaccharides, their origin, and extraction from seaweeds, application, and chemical modification. Derivatization of the polysaccharides to impart new functionalities by chemical modification such as esterification, amidation, amination, C-N bond formation, sulphation, acetylation, phosphorylation, and graft copolymerization is discussed. The suitability of extraction of seaweed polysaccharides such as agar, carrageenan, and alginate using ionic solvent systems from a sustainability point of view and future prospects for efficient extraction and functionalization of seaweed polysaccharides is also included in this review article.     

Investigation of liquid crystalline property of a new calamitic liquid crystalline system methyl 4-(4ʹ-(4ʹʹ-(decyloxy)benzyloxy) benzylideneamino)benzoate

A new polar calamitic liquid crystal, methyl 4-(4?-(4?-(decyloxy)benzyloxy) benzylideneamino)benzoate (M3BA) containing ether and Schiff base groups as linker with terminal polar ester group, has been synthesised and mesomorphic properties are studied by differential scanning calorimetry, polarising optical microscopy, density functional theory, temperature-dependent X-ray diffraction and temperature-dependent micro- Raman study. The smectic A (SmA) mesophase with focal conic texture has been observed with wide mesomorphic range. Layer thickness in SmA phase is greater than the optimised length of the molecule, indicating partially bilayer SmA phase. Analysis of Raman marker bands of C–H in-plane bending of phenyl rings, C=C stretching of rings, C=N stretching and C=O stretching shows structural changes at molecular level at Cr → SmA phase transition and provides proper intermolecular interactions responsible for dimeric unit in partially bilayer SmA phase.