Quantitative comparison of selectivities in the polymerization of cyclic esters

Chain transfer processes (k_tr) taking place in the polymerization (anionic and pseudoanionic) of cyclic esters (lactones) are reviewed. These reactions are mostly responsible for the departure of these systems from the fully controlled (living) polymerizations. The ratios of k_p/k_tr have been determined for a number of initiating systems and the structures of the growing species are related to their selectivity, expressed by k_p/k_tr. It has been shown that the less reactive and more sterically crowded active species polymerize more selectively.     

I NQR and spectroscopic investigation of impurity-doped and mixed lithium iodate Li1−xHxIO3 crystals

The ¹²⁷I NQR, IR absorption and Raman spectra of impurity-doped and mixed lithium iodate Li_1−xH_xIO₃ crystals grown from water solutions with different LiIO₃/HIO₃ ratios were investigated depending on the content of the impurity hydrogen x. The NQR results suggested that, at small concentration of doping iodic acid x<0.22, the lattice dynamics of the crystal grown from water solution changes significantly though the crystal retains hexagonal symmetry. Spectroscopic studies are compatible with average hexagonal symmetry of the grown doped crystals. From the results of Raman studies at room temperature and 100 K, the concentration range of hydrogen dopant 0.22<x<0.36 was found where disordered solid solution crystals Li_1−xH_xIO₃ are formed.     

Honeycomb nets with interpenetrating frameworks involving iminodiacetato-copper(II) blocks and bipyridine spacers: syntheses, characterization, and magnetic studies

Three coordination polymers of copper(II), viz. ([Cu(ida)(4,4'-bipyH)]ClO(4))( proportional, variant ) (1), ([Cu(2)(ida)(2)(micro-4,4'-bipy)].2H(2)O)( proportional, variant ) (2), and [Cu(2)(ida)(2)(bpa)]( proportional, variant ) (3) have been synthesized by the process of self-assembly using Cu(ida) [ida = iminodiacetate(2-)] as the building block and 4,4'-bipyridyl and 1,2-bis(4-pyridyl)ethane (bpa) as linkers. Crystals of 1 are orthorhombic, of space group Pna2(1), with a = 13.8956(12) A, b = 16.3362(16) A, c = 7.3340(12), and Z = 4. Both compounds 2 and 3 crystallize in monoclinic space group P2(1)/a with a = 10.1887(8) A (9.6779(10) A for 3), b = 8.0008(11) A (9.1718(10) A), c = 11.6684(9) A (12.9144(12) A), beta = 98.307(11) degrees (102.796(18) degrees ), and Z = 2 (2). Compound 1 has a zigzag chain structure with an extensive hydrogen-bonded network while compounds 2 and 3 are honeycomb (6,3) nets with interpenetrating structures. Variable temperature (2-300 K) magnetic study indicates the presence of weak antiferromagnetic interactions (J = 0.82 +/- 0.01 cm(-)(1)) in 1 and ferromagnetic in 2 (J = -0.45 +/- 0.05 cm(-)(1)) and 3 (J = -0.21 +/- 0.02 cm(-)(1)). The extent of planarity of the bridging "Cu-O-C-O-Cu" moiety, acting as the super-exchange pathway between the neighboring copper centers, probably controls the sign of the magnetic exchange coupling in these compounds.     

Two-dimensional surface properties of PEO-PPO-PEO triblock copolymer film at the air/water interface in the absence and presence of Tyr-Phe dipeptide, Val-Tyr-Val tripeptide, SDS and stearic acid

Two-dimensional surface properties of PEO-PPO-PEO triblock copolymer film (Mol.Wt. 2800) in the absence and presence of Tyr-Phe dipeptide, Val-Tyr-Val tripeptide, sodium dodecylsulfate and stearic acid have been investigated for the first time at the air/water interface using Langmuir film balance technique. It is observed that the above polymer forms fairly stable film at the air/water interface. There are no significant changes observed in the surface pressure-area (π-A) isotherms of polymer in the presence of SDS. However, more expanded film was formed in presence of SDS since the solubility of the polymer is more in SDS and the polymer network is disturbed in presence of SDS, which results in the increase in surface area of the polymer films. In the presence of dipeptide and tripeptide, the surface area of the polymer film decreased with a slight increase in the surface pressure indicating the binding of these peptides to polymer, which enhances the stability of the polymer film. Thermodynamic studies on the change in surface area (ΔA) and excess free energy of mixing (ΔG(mix)(E)) associated with the formation of the mixed film suggest the occurrence of a thermodynamically unstable mixed film. The presence of SDS slightly decreases the formation of mixed film of stearic acid with triblock copolymer and peptides due to the solubilization of these compounds in SDS. However, the hydrophobicity of the polymer films increases in the presence of stearic acid, leading to the increase in surface pressure. The positive deviation of ΔA and the positive ΔG(mix)(E) values show the non-ideality and incompatibility of thermodynamically unstable mixed films. The thermodynamic results suggest that the stability and compatibility of the polymer, peptides and their mixed films with stearic acid in the presence of SDS are decreased, which is in good agreement with the results obtained for other polymeric systems.     

Design, synthesis, and biological activities of some branched carbasugars: construction of a substituted 6-oxabicyclo[3.2.1]nonane skeleton

Transformation of cyclohexa-2,4-diene-1,2-diylbis(methylene) diacetate to various carbasugars is described. Photooxygenation of a cyclohexadiene derivative gave a bicyclicendoperoxide, which was reduced with thiourea to [2-[(acetyloxy)methyl]cyclohexa-2,4-dien-1-yl]methyl acetate. Epoxidation of the remaining double bond followed by epoxide ring-opening and hydrolysis of the acetate groups gave one of the target hexols. The bicyclic endoperoxide was rearranged to a diepoxide with CoTPP. The diepoxide was reacted with sulfamic acid in acetic anhydride, resulting in the formation of a new branched carbasugar as well as in the formation of cyclitols with a 6-oxabicyclo[3.2.1]nonane skeleton. The mechanism of the formation of the products is discussed. The inhibition activity of six cyclitol derivatives was tested against α-glycosidase.     

Strategy of Cr detoxification by Callitriche cophocarpa

The present work focused on the qualitative and quantitative analysis of Cr detoxification strategy of aquatic cosmopolitan plant Callitriche cophocarpa. This plant species has just been described in the context of its unusual accumulation potential of Cr. The emphasis of the work was placed on the redox reaction Cr(VI)→Cr(III) which is considered to be remediation mechanism of highly reactive and mobile Cr(VI) ions. Plants were immersed for 5 days in 1 mM of Cr(VI) (potassium dichromate) or 1 mM of Cr(III) (chromium sulphate) solutions in semi-natural conditions. Cr was effectively removed from the solution up to the extent of ca.58% or 35% of the starting amount, in the case of Cr(III) and Cr(VI), respectively. No plant-induced Cr(VI) reduction accompanying Cr accumulation was observed in Cr(VI) solutions except from the apparent one, noticed at the fourth day of incubation. On the contrary to these results, according to the method of electron paramagnetic resonance spectroscopy (L-band EPR), biphasic signal of Cr(V) attending Cr(VI) to Cr(III) reduction was detected inside the plant tissue every day of investigations. Our results show that phytoextraction but not phytostabilization is the main strategy of Cr detoxification by C. cophocarpa in aquatic systems.      

Vibrational spectra of Hg3TeO6 and Hg2TeO5

The infrared and Raman spectra of the crystalline hexaoxotellurates Hg3TeO6 and Hg2TeO5 were recorded and discussed on the basis of a site symmetry analysis derived from known structural data. Approximate values for the Te-O bond force constants are reported and some comparisons with related species are made.     

Micro-TLC Approach for Fast Screening of Environmental Samples Derived from Surface and Sewage Waters

In this work we demonstrated analytical capability of micro-planar (micro-TLC) technique comprising one and two-dimensional (2D) separation modes to generate fingerprints of environmental samples originated from sewage and ecosystems waters. We showed that elaborated separation and detection protocols are complementary to previously invented HPLC method based on temperature-dependent inclusion chromatography and UV-DAD detection. Presented 1D and 2D micro-TLC chromatograms of SPE (solid-phase extraction) extracts were optimized for fast and low-cost screening of water samples collected from lakes and rivers located in the area of Middle Pomerania in northern part of Poland. Moreover, we studied highly organic compounds loaded in the treated and untreated sewage waters obtained from municipal wastewater treatment plant “Jamno” near Koszalin City (Poland). Analyzed environmental samples contained number of substances characterized by polarity range from estetrol to progesterone as well as chlorophyll-related dyes previously isolated and pre-purified by simple SPE protocol involving C18 cartridges. Optimization of micro-TLC separation and quantification protocols of such samples were discussed from the practical point of view using simple separation efficiency criteria including total peaks number, log(product ΔhR _F), signal intensity and peak asymmetry. Outcomes of the presented analytical approach, especially using detection involving direct fluorescence (UV366/Vis) and phosphomolybdic acid (PMA) visualization are compared with UV-DAD HPLC-generated data reported previously. Chemometric investigation based on principal components analysis revealed that SPE extracts separated by micro-TLC and detected under fluorescence and PMA visualization modes can be used for robust sample fingerprinting even after long-term storage of the extracts (up to 4 years) at subambient temperature (?20 °C). Such approach allows characterization of wide range of sample components that are present in given extract in high and middle concentration range. Due to protocol simplicity and low cost of analysis this method can be useful for preliminary sample screening.