Investigation of Copper(II) Interference on the Anodic Stripping Voltammetry of Lead(II) and Cadmium(II) at Bismuth Film Electrode

The bismuth‐coated electrode is known to be prone to errors caused by copper(II). This study investigates copper(II) interference at bismuth film electrode for the detection of lead(II) and cadmium(II). It was conducted using glassy carbon electrode, while the bismuth film was plated in situ simultaneously with the target metal ions at ? 1200 mV. Copper(II) presented in solution significantly reduced the sensitivity of the electrode, for example there was an approximately 70 % and 90 % decrease in peak signals for lead(II) and cadmium(II), respectively, at a 10‐fold molar excess of copper(II). The decrease in sensitivity was ascribed to the competition between copper and bismuth or the metal ions for surface active sites. Scanning electron microscopy (SEM) and energy dispersive X‐ray (EDX) analysis suggested a large decrease in the amount of bismuth nanoparticles formed on the electrode surface in the presence of copper(II) occurred, validating the competition between copper and bismuth ions for surface active sites. Recovery of the stripping signal of lead(II) and cadmium(II) was obtained by adding ferrocyanide ion to the solution. Finally, the proposed method was successfully applied to determine lead(II) and cadmium(II) in water samples and the method was validated by ICP‐MS technique.     

Synthesis of 3‐(substituted)‐2,4,8,15‐tetroxa‐3‐phosphadispiro[5.2.5]hexadecane‐3‐oxides

Novel 3‐(substituted)‐2,4,8,15‐tetroxa‐3‐phosphadispiro[5.2.5]hexadecane‐3‐oxides (3‐12) have been synthesized by cyclization of 1,5‐dioxaspiro[5.5]undecande‐3,3‐dimethanol (1) with various substituted aryl phosphorus dichloridates (2) in dry toluene‐THF in the presence of triethylamine at 40‐60 ^oC. Their molecular structures were determined by ir, nmr and mass spectral studies and were screened for antifungal activity against Curvularia lunata and Aspergillus niger, and antibacterial activity on Staphylococcus aureus and Escherichia coli. Most of them possess significant activity.     

Negative ion electrospray ionization mass spectral study of dicarboxylic acids in the presence of halide ions

The negative ion electrospray ionization (ESI) mass spectra of a series of dicarboxylic acids, a pair of isomeric (cis/trans) dicarboxylic acids and two pairs of isomeric (positional) substituted benzoic acids, including a pair of hydroxybenzoic acids, were recorded in the presence of halide ions (F(-), Cl(-), Br(-) and I(-)). The ESI mass spectra contained [M--H](-) and [M+X](-) ions, and formation of these ions is found to be characteristic of both the analyte and the halide ion used. The analytes showed a greater tendency to form adduct ions with Cl(-) under ESI conditions compared with the other halide ions used. The isomeric compounds yielded distinct spectra by which the isomers could be easily distinguished. The collision-induced dissociation mass spectra of [M+X](-) ions reflected the gas-phase basicities of both the halide ion and [M--H](-) ion of the analyte. However, the relative ordering of gas-phase basicities of all analyte [M--H](-) and halide ions could not account for the dominance of chloride ion adducts in ESI mass spectra of the analytes mixed with equimolar quantities of the four halides.     

Supramolecular complex of [60]fullerene-grafted polyelectrolyte and surfactant: mechanism and nanostructures

Water-soluble, pH-responsive mono- and di-[60]fullerene end-capped poly(acrylic acid)s (PAA-C60 and C60-PAA-C60) were synthesized using the atom transfer radical polymerization technique. Isothermal titration calorimetry, dynamic light scattering, UV-vis spectroscopy, and transmission electron microscopy were employed to study the supramolecular complexation between fullerene end-capped PAAs and nonionic surfactant, polyethylene glycol (9-10) tert-octylphenyl ether, also known as Triton X100 (TX100) at different pH values. At pH < 4, TX100 bound specifically to C60 domains driven by hydrophobic and pi-pi interactions between TX100 and fullerene molecules. The binding was exothermic, and the magnitude of the interaction decreased gradually with increasing pH. The amount of polymer-bound TX100 was proportional to the fullerene content, which was approximately 1.3 and approximately 2.5 mM for 5 mM (concentration of carboxylic groups) PAA-C60 and C60-PAA-C60, respectively. Morphological transformations resulting in the formation of polymer/surfactant complex (PSC) precipitates in the course of binding were observed for both polymers. The PSC of PAA-C60 possessed a dense spherical structure, whereas the PSC of C60-PAA-C60 possessed a lamellar stacking structure. The PSC precipitates resolubilized in excess amounts of TX100 to form stable aggregates.     

Chiral discrimination of alpha-amino acids by the DNA triplet GCA using amino acids as a co-selector

The DNA triplet GCA is successfully used as a chiral selector for the chiral discrimination of amino acids using amino acids themselves as a co-selector. Chiral discrimination was achieved by investigating the collision-induced dissociation spectra of the [X(A) + X(R) + 2Y - 2H](2-) ion generated by electrospraying a mixture of analyte amino acid (X(A)), reference amino acid (X(R)) and GCA (Y). The relative abundances of fragment ions resulting from the competitive loss of reference and X(A)'s are considered for measuring the degree of chiral discrimination. GCA successfully shows D-selectivity for all the amino acids, except Tyr and Lys. The success of the method lies in the selection of a suitable 10(R) that has closer GCA binding affinity to that of analyte. The degree of discrimination by GCA is improved in the presence of the reference, and the chirality of the reference does not change the selectivity of GCA. The suitability of the method for the measurement of optical purity is also demonstrated.     

Synthesis and aqueous solution properties of sterically stabilized pH-responsive polyampholyte microgels

Emulsion copolymerization of poly(methacrylic acid) and poly(2-(diethylamino)ethyl methacrylate) (PMAA/PDEA) yielded pH-responsive polyampholyte microgels of 200-300 nm in diameter. These microgels showed enhanced hydrophilic behavior in aqueous medium at low and high pH, but formed large aggregates of approximately 2500 nm at intermediate pH. To achieve colloidal stability at intermediate pH, a second batch of microgels of identical monomer composition were synthesized, where monomethoxy-capped poly(ethylene glycol)methacrylate (PEGMA) was grafted onto the surface of these particles. Dynamic light-scattering measurements showed that the hydrodynamic radius, Rh, of sterically stabilized microgels was approximately 100 nm at intermediate pH and increased to 120 and 200 nm at pH 2 and 10, respectively. Between pH 4 and 6, these microgels possessed mobility close to zero and a negative second virial coefficient, A2, due to overall charge neutralization near the isoelectric pH. From the Rh, mobility, and A2, cross-linked MAA-DEA microgels with and without PEGMA retained their polyampholytic properties in solution. By varying the composition of MAA and DEA in the microgel, it is possible to vary the isoelectric point of the colloidal particles. These new microgels are being explored for use in the delivery of DNA and proteins.     

A facile synthesis of highly water-soluble, core–shell organo-silica nanoparticles with controllable size via sol–gel process

A series of highly water-soluble organo-silica nanoparticles, ranging from 2 to 10 nm in diameter, were synthesized by the cohydrolysis and copolycondensation reactions. ω-methoxy(polyethyleneoxy)propyltrimethoxysilane (PEG6-9) and hydroxymethyltriethoxysilane (HMTEOS) mixtures were catalyzed by sodium hydroxide in the presence of surfactant benzethonium chloride (BTC) with various ratios of PEG6-9/HMTEOS at room temperature. The synthesized organo-silica nanoparticles possess a core–shell structure with a core of organo-silica resulting from HMTEOS and a monolayer shell of PEG6-9. The chemo-physical characteristics of the particles were studied by gel permeation chromatography (GPC), Fourier transform infrared (FTIR) spectroscopy, ²⁹Si nuclear magnetic resonance (NMR), dynamic light scattering (DLS), transmission electron microscopy (TEM), and thermogravimetric analysis (TGA). The molecular weight and particle size of the particles increased with increasing HMTEOS molar ratios. The richest HMTEOS composition for the water-soluble particles was found to be HMTEOS:PEG6-9 = 80:20, where the particles had a 6 nm diameter core and a 0.8 nm thick shell. We propose that these water-soluble organo-silica nanoparticles will be suitable for biomedical applications.     

A Structural Diversity of Molecular Alkaline-Earth-Metal Polyphosphides: From Supramolecular Wheel to Zintl Ion

A series of molecular group 2 polyphosphides has been synthesized by using air-stable [Cp*Fe(η⁵-P₅)] (Cp*=C₅Me₅) or white phosphorus as polyphosphorus precursors. Different types of group 2 reagents such as organo-magnesium, mono-valent magnesium, and molecular calcium hydride complexes have been investigated to activate these polyphosphorus sources. The organo-magnesium complex [(^DippBDI−Mg(CH₃))₂] (^DippBDI={[2,6-ⁱPr₂C₆H₃NCMe]₂CH}⁻) reacts with [Cp*Fe(η⁵-P₅)] to give an unprecedented Mg/Fe-supramolecular wheel. Kinetically controlled activation of [Cp*Fe(η⁵-P₅)] by different mono-valent magnesium complexes allowed the isolation of Mg-coordinated formally mono- and di-reduced products of [Cp*Fe(η⁵-P₅)]. To obtain the first examples of molecular calcium-polyphosphides, a molecular calcium hydride complex was used to reduce the aromatic cyclo-P₅ ring of [Cp*Fe(η⁵-P₅)]. The Ca-Fe-polyphosphide is also characterized by quantum chemical calculations and compared with the corresponding Mg complex. Moreover, a calcium coordinated Zintl ion (P₇)³⁻ was obtained by molecular calcium hydride mediated P₄ reduction.     

Prompt and delayed photoejection of hydrated electrons in the UV photolysis of aqueous solutions of copper(I) complexes

The ejection of hydrated electrons from 266-nm laser-photoexcited solutions containing Cu(NH₃)⁺₃, CuCl²⁻₃, or CuBr²⁻₃ occurs through two pathways on the nanosecond time scale: a prompt ejection (ττ>laser pulsewidth) which follows a first-order rate law. This behavior is consistent with electron ejection from two excited states: the primary CTTS state, and longer-lived triplet species consisting of an exciplex and its precursor. The quantum yields for both prompt and delayed ejection are quite high, in the 0.15–0.4 range.     

Synthesis and computational studies of potent antimicrobial and anticancer indolone scaffolds with spiro cyclopropyl moiety as a novel design element

The indolones nucleus is the central core to develop new effective anticancer agents and its substitution at the 3-position can affect antitumor activity, 3-spirocyclopropyl-2-oxindoles have attracted the scientist's community to design and develop expedition's strategies towards their construction and explore the potential of this useful scaffold with their newer derivatives in medicinal world. The present paper describes the synthesis of 3-spirocyclopropyl-2-indolone derivatives in three steps via synthesis of ylide leading to methylene-indolinones followed by the formation of the final product spirocyclopropyl oxindole derivatives with improved yields. In this milieu we considered motivating to advance exploration the biological potencies and computational studies of our newly synthesized molecules. The aimed target molecules were screened for antimicrobial and anticancer activities where they exhibited substantial effective antimicrobial activities. Amongst them, potent compound, bromospirocyclopropyl indolone, 6d displayed encouraging MIC ranging from 0.007 to 0.49 μg/mL for gram positive microbes and also substantial anticancer activity with an IC₅₀ of 11.5 μg/mL. Finally, the computational modelling studies were performed to explore structure-activity relationship analysis. Active site of receptor protein shows docking scores of these molecules as - 5.78 kcal/mol and ?5.097 kcal/mol for the docked target proteins. The binding energy of the best score is found to be ?41.67 kcal/mol to ?44.67 kcal/mol. Thus, the present paper efficaciously validated spirocyclopropyl indolone framework for drug candidates as potent anticancer as well as antimicrobial compounds.