Photophysical Properties of Coumarin‐30 Dye in Aprotic and Protic Solvents of Varying Polarities¶

Experimental results on various photophysical properties of coumarin‐30 (C30) dye, namely, Stokes' shift (Δv), fluorescence quantum yield (τ_f), fluorescence lifetime (τ_f), radiative rate constant (k_f) and nonradiative rate constant (k_nr), as obtained using absorption and fluorescence measurements have been reported. Though in most of the solvents the properties of C30 show more or less linear correlation with the solvent polarity function, Δf= [(ε ‐ 1)/(2ε+ 1) ‐ (n² ‐ 1)/ (2n²+ l)], they show unusual deviations in nonpolar solvents at one end and in high‐polarity protic solvents at the other end. From the solvent polarity and temperature effect on the photophysical properties of the dye, following inferences have been drawn: ( 1 ) in nonpolar solvents, the dye exists in a nonpolar structure, where its 7‐NEt₂ substituent adopts a pyramidal configuration and the amino lone pair is out of resonance with the benzopyrone π cloud; ( 2 ) in medium to higher polarity solvents, the dye exists in a polar intra‐molecular charge transfer structure, where the 7‐NEt₂ group and the 1,2‐benzopyrone moiety are in the same plane and the amino lone pair is in resonance with the benzopyrone π cloud; ( 3 ) in protic solvents, the dye‐solvent intermolecular hydrogen bonding influences the photophysical properties of the dye; and ( 4 ) in high‐polarity protic solvents, the excited C30 undergoes a new activation‐controlled nonradiative deexcitation process because of the involvement of a twisted intra‐molecular charge transfer (TICT) state. Contrary to most other TICT molecules, the activation barrier for this deexcitation process in C30 is observed to increase with solvent polarity. A rational for this unusual behavior has been given on the basis of the solvent polarity‐dependent stabilization and crossing of relevant electronic states and the relative propensity of interconversion among these states.     

Structural and functional analogue of the active site of polysulfide reductase from Wolinella succinogenes

Synthesis of [PPh4]2[Mo(SPh)2(S2C2(CN)2)2] (2) from [PPh4]2[MoO(S2C2(CN)2)2] (1) has been achieved to mimic the postulated [Mo(S)6] core of polysulfide reductase with two thiolates and two bis(ene-dithiolate) ligands. Compound 2 reacts with polysulfide to yield H2S, modeling the function of polysulfide reductase. The facile conversion of 2 back to 1 in moist solvent suggests that the interconversion of the [MoIV = O] and [MoIV - X] (X = O-Ser, S-Cys, Se-Cys) moieties might occur in the DMSO reductase class of enzymes under appropriate hydrophobic/hydrophilic conditions.     

Absorption and fluorescence spectral studies of the interaction of sulpha drugs with α-cyclodextrin

The spectral characteristics of different drugs i.e. sulfanilamide, sulfanilic acid, sulfosalicylic acid dihydrate (SSAD) and sulfamethoxazole in aqueous α-cyclodextrin (CD) have been investigated at neutral pH. The formation of inclusion complexes of sulfa drugs with α-CD leads to the changes in fluorescence and absorption spectra which further enable the calculation of association constant of the bind processes by implementing the non-linear regression on the experimental data. The standard Gibbs energy ΔG was also calculated for the systems in which complex formation was observed. The α-CD study indicates that the sulpha drugs form 1:1 inclusion complex with α-CD.     

The unambiguous synthesis and NMR assignment of 4-alkoxy and 3-alkylquinazolines

Contrary to a number of reports, alkylations of the privileged 3,4-dihydroquinazoline scaffold provide N3-alkylated products, and not 4-alkoxyquinazolines. To correctly assign the structure, ¹³C NMR shifts of the –Z–CH_n– (Z=O, N) fragment are necessary; resonances in the 45–55 ppm range are indicative of N3-alkylation. Treatment of 3,4-dihydroquinazoline-4-one with p-TsCl afforded the N3-tosylated compound, whose reaction with an amine yielded the corresponding N3-alkyl derivative. A mechanism corroborated by ¹⁵N-labeling involving pyrimidine ring opening and recyclisation is proposed. Finally, the unambiguous preparation of 4-alkoxyquinazolines is described via treatment of 3,4-dihydroquinazoline-4-ones with PCl₅ followed by an alkoxide.     

Palladium(ii) driven self-assembly of a saturated quadruple-stranded metallo helicate

Complexation of the bridging bidentate ligand N,N'-(pyridine-2,6-diyl)dinicotinamide, L with palladium(ii) resulted in a single discrete M(2)L(4) self-assembly, 1, in a quantitative manner. The entropically-controlled assembly of 1 resulted in a rare saturated, quadruple-stranded metallo-helicate, in which both the left-handed (M) and right-handed (P) helicates exist in the crystal structure.     

Polyhydroxamic Acid Sorbents for Uranium Recovery

Crosslinked polyacrylamides were synthesized by solution polymerization using benzoyl peroxide as the radical initiator. The water–insoluble polymer obtained was functionalized by reacting with hydroxylamine to convert the amide group into hydroxamic acid group. The resultant functionalized polymer was characterized in terms of moisture uptake, elemental composition, IR spectra, thermal stability, exchange capacity and heavy metal sorption. The sorbent, obtained in particulate form, was investigated for its sorption properties with respect to uranium from uranyl nitrate solutions under unstirred batch conditions. This paper will concentrate on preparation, characterization and performance evaluation with respect to uranium sorption as a function of concentration, time, solution pH and temperature. The potential of this sorbent for uranium and other heavy metal ion recovery from sea water is ascertained.     

Intriguing H-aggregate and H-dimer formation of coumarin-481 dye in aqueous solution as evidenced from photophysical studies

Photophysical properties of coumarin-481 (C481) dye in aqueous solution show intriguing presence of multiple emitting species. Concentration and wavelength dependent fluorescence decays and time-resolved emission spectra and area-normalized emission spectra suggest the coexistence of dye monomers, dimers, and higher aggregates (mostly trimers) in the solution. Because of the efficient intramolecular charge transfer (ICT) state to twisted intramolecular charge transfer (TICT) state conversion, the dye monomers show very short fluorescence lifetime of ~0.2 ns. Fluorescence lifetimes of dimers (~4.1 ns) and higher aggregates (~1.4 ns) are relatively longer due to steric constrain toward ICT to TICT conversion. Observed results indicate that the emission spectra of the aggregates are substantially blue-shifted compared to monomers, suggesting H-aggregation of the dye in the solution. Temperature-dependent fluorescence decays in water and time-resolved fluorescence results in water-acetonitrile solvent mixtures are also in support of the dye aggregation in the solution. Though dynamic light scattering studies could not recognize the dye aggregates in the solution due to their small size and low concentration, fluorescence up-conversion measurements show a relatively higher decay tail in water than in water-acetonitrile solvent mixture, in agreement with higher dye aggregation in aqueous solution. Time-resolved fluorescence results with structurally related non-TICT dyes, especially those of coumarin-153 dye, are also in accordance with the aggregation behavior of these dyes in aqueous solution. To the best of our knowledge, this is the first report on the aggregation of coumarin dyes in aqueous solution. Present results are important because coumarin dyes are widely used as fluorescent probes in various microheterogeneous systems where water is always a solvent component, and the dye aggregation in these systems, if overlooked, can easily lead to a misinterpretation of the observed results.     

Regioselective Synthesis of Thiopyrano[3,2‐c][1]benzothiopyran‐5(2H)‐one and Thieno[3,2‐c][1]benzothiopyran‐4(2H)‐one

4‐Mercaptothiocoumarin was alkylated with different propargylic and allylic halides under phase‐transfer‐catalyzed conditions in the presence of tetrabutylammonium bromide (TBAB) or benzyl triethylammonium chloride (BTEAC) catalyst in dichloromethane–aqueous NaOH solution (1%) at room temperature. These 4‐thiopropynyl and thioallyl thiocoumarins were then refluxed in chlorobenzene and quinoline to give thiopyrano[3,2‐c][1]benzothiopyran‐5(2H)‐one and thiopyrano[3,2‐c][1]benzothiopyran‐4‐one respectively.     

Study of approximate coupled cluster methods for first-order static properties

In this paper, we analyse the algebraic structure of the equations for calculating the first order static properties using several approximate versions of Coupled Cluster (CC) methods. In particular, the non-variational and the variational method using a CC wavefunction corresponding to an appropriately defined perturbed Hamiltonian as well as the simple expectation value expression using a CC stationary state are studied under different approximations. Two different models are proposed: (a) use of maximum overlap orbitals where the pertinent approximations are TT ₂, T ⁽¹⁾ T ₂ ⁽¹⁾, (b) use of Hartree-Fock orbitals and T(T ₁+T ₂), T ⁽¹⁾(T ₁ ⁽¹⁾ +T ₂ ⁽¹⁾ ) approximations. It is analytically shown that in both these models certain approximate versions of the methods under purview yield identical results for first order static properties.NCL Communication No. 3725