A mercury(II) ion-selective electrode based on neutral salicylaldehyde thiosemicarbazone

A new ion-selective PVC membrane electrode based on salicylaldehyde thiosemicarbazone as an ionophore is developed successfully as sensor for mercury(II) ions. The electrode shows excellent potentiometric response characteristics and displays a linear log[Hg²⁺] versus EMF response over a wide concentration range of 1.778×10⁻⁶-1.0×10⁻¹ M with Nernstian slope of 29 mV per decade with the detection limit of 1.0×10⁻⁶ M. The response time of the electrode is less than 30 s and the membrane electrode operates well in the pH range of 1.0-3.0. The lifetime of the sensor is about 2 months. The electrode shows better selectivity towards Hg²⁺ ions in comparison with the alkali, alkaline and some heavy metal ions; most of these metal ions do not show significant interference (K^Pot_Hg,M values of the order of 10⁻³-10⁻⁴). The present sensor showed comparable or even better performance vis-à-vis similar PVC based ion-selective electrodes reported in literature. The sensor was also applied as an indicator electrode for potentiometric titration of Hg²⁺ions with I⁻ and Cr₂O₇²⁻.     

Synthesis of Polylactide under Inert Atmosphere and Vacuum

The ring-opening polymerization (ROP) of L- lactide was carried out in bulk using various initiators along with triphenylphosphine (PPh₃) as co-initiator. Equimolar addition of triphenylphosphine increased the molecular masses of polylactide (PLA). The polymerization was carried out at 403.15 K up to 155 hr. Different experiments were carried out over a wide range of monomer to initiator (M_o/I_o) ratios. It was found that maximum molecular weight of polylactide was observed when M_o/I_o ratio was 2500–2700. Polymerization reactions were carried out under two different environments in the reaction vessel, an inert cover and a partial vacuum. The average molecular weight of polylactide was determined by using size exclusion chromatography. The increase of polymerization time increased the weight average molecular weight but after prolonged reaction time, the molecular weight decreased gradually.     

Solid-phase fluorescent BODIPY–peptide synthesis via in situ dipyrrin construction

Traditional fluorescent peptide chemical syntheses hinge on the use of limited fluorescent/dye-taggable unnatural amino acids and entail multiple costly purifications. Here we describe a facile and efficient protocol for in situ construction of dipyrrins on the N-terminus with 20 natural and five unnatural amino acids and the lysine''s side chain of selected peptides/peptide drugs through Fmoc-based solid-phase peptide synthesis. The new strategy enables the direct formation of boron–dipyrromethene (BODIPY)–peptide conjugates from simple aldehyde and pyrrole derivatives without pre-functionalization, and only requires a single-time chromatographic purification at the final stage. As a model study, synthesized EBNA1-targeting BODIPY1–Pep4 demonstrates intact selectivity in vitro, responsive fluorescence enhancement, and higher light cytotoxicity due to the photo-generation of cytotoxic singlet oxygen. This work offers a novel practical synthetic platform for fluorescent peptides for multifaceted biomedical applications.

Solid-phase fluorescent BODIPY–peptide synthesis via in situ dipyrrin construction offers an efficient fluorescent peptide synthetic platform for multifaceted biomedical applications.     

Evaluation of Anthocyanin Content,Antioxidant Potential and Antimicrobial Activity of Black,Purple and Blue Colored Wheat Flour and Wheat-Grass Juice against Common Human Pathogens

The present study aimed to analyze the antioxidant and antimicrobial activity of anthocyanins extracted from colored wheat flour and wheat-grass juice against human pathogens. The total anthocyanin content and antioxidant potential in colored wheat flour and wheat-grass juice extracts were significantly higher than white flour and wheat-grass juice extracts. Ultra-performance liquid chromatography showed the maximum number of anthocyanin peaks in black wheat, with delphinidin-3-o-galactoside chloride, delphinidin-3-o-glucoside chloride, and cyanindin-3-o-glucoside chloride as the major contributors. Among flour extracts, maximum zones of inhibition against Staphylococcus aureus (MTCC 1934), Pseudomonas aeruginosa (MTCC 1434), Escherichia coli, and Candida albicans (MTCC 227) were produced by black flour extract, having the highest anthocyanin content. It exhibited a minimum microbicidal concentration (MMC) of 200 mg/mL against E. coli and C. albicans; and 100 and 150 mg/mL against S. aureus and P. aeruginosa, respectively. Black and purple flour extracts exhibited a minimum inhibitory concentration (MIC) of 50 mg/mL against S. aureus and P. aeruginosa. White flour extracts did not show MMC against E. coli and C. albicans. Among wheat-grass juice extracts, black wheat-grass was most effective and showed an MIC of 100–150 mg/mL against all pathogens. It exhibited an MMC of 200 mg/mL against S. aureus and P. aeruginosa. Hence, anthocyanin-rich colored wheat could be of nutraceutical importance.     

Development and Validation of a Stability-Indicating High-Performance Thin-Layer Chromatographic Method for the Simultaneous Quantification of Sparfloxacin and Flurbiprofen in Nanoparticulate Formulation

JPC – Journal of Planar Chromatography – Modern TLC - A simple, sensitive, precise, rapid, and reliable high-performance thin-layer chromatographic (HPTLC) method for the simultaneous...     

Pharmacophore and docking-based virtual screening approach for the design of new dual inhibitors of Janus kinase 1 and Janus kinase 2

Janus kinase 1 and 2, non-receptor protein tyrosine kinases, are implicated in various cancerous diseases. Involvement of these two enzymes in the pathways that stimulate cell proliferation in cancerous conditions makes them potential therapeutic targets for designing new dual-targeted agents for the treatment of cancer. In the present study, two separate pharmacophore models were developed and the best models for JAK1 (AAADH.25) and JAK2 (ADRR.92) were selected on the basis of their external predictive ability. Both models were subjected to a systematic virtual screening (VS) protocol using a PHASE database of 1.5 million molecules. The hits retrieved in VS were investigated for ADME properties to avoid selection of molecules with a poor pharmacokinetic profile. The molecules considered to be within the range of acceptable limits of ADME properties were further employed for docking simulations with JAK1 and JAK2 proteins to explore the final hits that possess structural features of both pharmacophore models as well as display essential interactions with both of them. Thus, the new molecules obtained in this way should show inhibitory activity against JAK1 and JAK2 and may serve as novel therapeutic agents for the treatment of cancerous disease conditions.     

Solid-Phase Synthesis of Nitrogen-Containing Five-Membered Heterocycles

In recent decades, a large number of reports related to solid-phase synthesis of heterocycles have appeared, owing to the wide variety of their biological activity. This review introduces the key concepts of solid-phase methodology and combinatorial synthesis with particular focus on the important role of solid-phase synthesis in the synthesis of nitrogen-containing five-membered ring heterocycles.     

Effect of temperature on the unfavorable mixing between tetraethylene glycol dodecyl ether and Pluronic P103

The fluorescence measurements of tetraethylene glycol dodecyl ether (C12E4) and triblock polymer (Pluronic P103), poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide), (EO)17(PO)60(EO)17, binary mixtures have been performed over the whole mixing range in the temperature range of 20-40 degrees C. The results have been evaluated by computing various micellar parameters and excimer formation. It has been concluded that mixed micelle formation takes place due to unfavorable mixing at lower temperature range, and the magnitude of which decreases with the increase in temperature up to 40 degrees C. The reduction in the unfavorable mixing has been attributed to the dehydration of P103 micelles with the increase in temperature.     

Design and characterization of three-dimensional carbon nanotube foams

We demonstrate a new method that makes use of colloidal silica templates to fabricate porous three-dimensional architectures of carbon nanotubes (CNTs). CNTs were grown on monolayered and multilayered structures of colloidal silica using chemical vapor deposition. Porous CNT membranes and three-dimensional carbon nanotube foams were obtained by treating these silica-CNTs structures with HF. The membranes and foams of CNT so obtained were chemically and mechanically stable and were characterized by using scanning electron microscopy and energy dispersive spectroscopy.     

Synthesis of Highly Stable,Water‐Dispersible Copper Nanoparticles as Catalysts for Nitrobenzene Reduction

We report an aqueous‐phase synthetic route to copper nanoparticles (CuNPs) using a copper–surfactant complex and tests of their catalytic efficiency for a simple nitrophenol reduction reaction under atmospheric conditions. Highly stable, water‐dispersed CuNPs were obtained with the aid of polyacrylic acid (PAA), but not with other dispersants like surfactants or polymethacrylic acid (PMAA). The diameter of the CuNPs could be controlled in the range of approximately 30–85 nm by modifying the ratio of the metal precursor to PAA. The catalytic reduction of p‐nitrophenol to p‐aminophenol takes place at the surface of CuNPs at room temperature and was accurately monitored by UV/Vis spectroscopy. The catalytic efficiency was found to be remarkably high for these PAA‐capped CuNPs, given the fact that at the same time PAA is efficiently preventing their oxidation as well. The activity was found to increase as the size of the CuNPs decreased. It can therefore be concluded that the synthesized CuNPs are catalytically highly efficient in spite of the presence of a protective PAA coating, which provides them with a long shelf life and thereby enhances the application potential of these CuNPs.