High-performance liquid chromatography and LC-ESI-MS method for the identification and quantification of two biologically active isomeric coumarinolignoids cleomiscosin A and cleomiscosin B in different extracts of Cleome viscosa

A rapid, sensitive and simple reverse-phase high-performance liquid chromatographic-electrospray ionization-mass spectrometry method for simultaneous determination of cleomiscosin A and cleomiscosin B has been developed and validated. The isomeric coumarinolignoids cleomiscosin A (1) and cleomiscosin B (2) were separated on a Waters symmetry C(18) column with a solvent system composed of acetonitrile-methanol (1:2) and acetic acid-water (0.5:99.5) in a gradient elution mode. The absorption at 326 nm was chosen as the measuring wavelength in which resolution and baseline separation of compounds 1 and 2 could be obtained. The identity of the two isomeric compounds 1 and 2 in the samples were determined on a triple quadrupole mass spectrometer with ESI interface operating in the positive mode. Calibration curves were linear (r(2) > 0.993) over the concentration range 20-200 microg/mL for cleomiscosin A and 10-200 microg/mL for cleomiscosin B with acceptable accuracy and precision, respectively. The intra-day and inter-day precision were 1.13 and 0.82% for cleomiscosin A and 1.78 and 1.28% for cleomiscosin B, respectively. The validated method was successfully applied for the analysis of the above two compounds in different extracts of Cleome viscosa.     

Photochemical Mechanisms of Fluorophores Employed in Single-Molecule Localization Microscopy

Decoding cellular processes requires visualization of the spatial distribution and dynamic interactions of biomolecules. It is therefore not surprising that innovations in imaging technologies have facilitated advances in biomedical research. The advent of super-resolution imaging technologies has empowered biomedical researchers with the ability to answer long-standing questions about cellular processes at an entirely new level. Fluorescent probes greatly enhance the specificity and resolution of super-resolution imaging experiments. Here, we introduce key super-resolution imaging technologies, with a brief discussion on single-molecule localization microscopy (SMLM). We evaluate the chemistry and photochemical mechanisms of fluorescent probes employed in SMLM. This Review provides guidance on the identification and adoption of fluorescent probes in single molecule localization microscopy to inspire the design of next-generation fluorescent probes amenable to single-molecule imaging.     

Synthesis,structure and magnetic properties of unsymmetrical dodecanuclear Mn–Ln clusters

Reaction of manganese acetate and lanthanide nitrates in the presence of excess of PhCOOH affords highly asymmetric dodecanuclear mixed-metal [Mn₁₀Ln₂(OH)(O)₈(PhCOOH)(PhCOO)₁₉] (Ln = Pr^III (1), Nd^III (2)) clusters. The similar reaction, but with only 2 equiv. of PhCOOH resulted in the compounds with higher nuclearity [Mn₁₁Eu₄(O)₈(OH)₈(PhCOO)₁₈(NO₃)₂(H₂O)₆]NO₃ · 4CH₃CN (3). Variable-temperature solid-state magnetic susceptibility of 1 and 2 in the temperature range 1.8–300 K were carried out, and for both complexes antiferromagnetic exchange interactions between the metal centers were observed, giving an estimated S = 17/2 ground state. AC magnetic susceptibility data have revealed out-of-phase signals, which suggest that these complexes exhibit a slow relaxation of magnetization as observed in single-molecule magnets.     

Intra and intermolecular hydrogen bonding in formohydroxamic acid

The presence of hydrogen bonding interactions in several tautomeric forms of formohydroxamic acid (FHA) and 1:1 association among the tautomeric forms and water‐coordinated tautomeric forms of FHA is explored theoretically. Out of the seven equilibrium structures, four tautomeric forms have been selected for aggregation with single water molecule and dimer formation. Fifteen aggregates of FHA with H₂O have been optimized at MP2/AUG‐cc‐PVDZ level and analyzed for intramolecular and intermolecular H‐bond interactions. Twenty‐seven dimers of the four tautomeric forms have been obtained at MP2/6‐31+G* level. The stabilization energies associated with dimerization and adduct formation with water are the result of H‐bond interactions and range from very weak to medium. The atomic charges and NBO analysis indicate that the electrostatic and the charge transfer are the important components favoring H‐bond formation. © 2007 Wiley Periodicals, Inc. Int J Quantum Chem, 2008     

Analyte Detection: A Decade of Progress in the Development of Optical/Fluorescent Sensing Probes

The development of selective and sensitive chemical sensors capable of detecting metal ions, anions, neutral species, explosives and hazardous substances, selectively and sensitively has attracted considerable interest of various research groups. The presence of such analytes within the permissible limits is often beneficial, but the excess amounts may lead to lethal effects to both the environment as well as the living organisms. Owing to the toxicity of the heavy metal ions, toxic anions and nitro-aromatics which are main constituents of explosives, the timely detection of these materials is most desirable to ensure safety and security of the mankind. In this personal account, we present several classes of molecular sensors that were specifically designed in our lab during the past decade for detecting several species in solutions, solid state as well as biological media. Modulation of the optical properties in response to the presence of guest species, led to selective and sensitive detection protocols, and was supported by the theoretical studies wherever possible. We have also extended the application of some of these probes for the on-site detection of analytes by developing the paper strips, glass slides and even the wool and cotton fabrics loaded with probes. One such development represents detection of palladium in human urine and blood samples collected from clinical samples. Additionally, the sensing events in some cases have successfully been reproduced in the live cancer cells. Based on the ease and cost-effective synthesis of the molecular probes, we hope that this account shall provide significant information to researchers in understanding the structure dependent sensing capabilities of the molecular probes.     

One-pot synthetic approach to isolate a single isomer of bis(diethylenetriamine)cobalt(III) cation in bulk using benzoates and the isomeric effects of the cation on ion association with anions

Using a one-pot synthetic approach, a single isomer of bis(diethylenetriamine)cobalt(III) cation, [Co(dien)₂]³⁺ is obtained in bulk from the isomeric mixture (s-fac : u-fac : mer is 7 : 28 : 65) using sodium salts of benzoates (BBz-bromobenzoate, DNBz-dinitrobenzoate, MBz-methylbenzoate) in aqueous medium. Herein, we report the syntheses and characterization of three complexes of composition mer-[Co(dien)₂]Cl(p-BBz)₂·H₂O (1), s-fac-[Co(dien)₂](o,p-DNBz)₃·H₂O (2) and mer-[Co(dien)₂]Cl(p-MBz)₂·4H₂O (3) in the continuation of our earlier work, where benzoate (Bz), p-chlorobenzoate (CBz), p-nitrobenzoate (NBz) and p-aminobenzoate (ABz) were used. The isomeric identification of complex cation was initially made on the basis of spectroscopic characterization (UV–visible, IR and NMR). The binding properties of [Co(dien)₂]³⁺ with benzoates (p-BBz, o,p-DNBz, p-MBz, Bz, CBz, NBz or ABz) have been studied using standard UV–visible spectroscopic titrations in aqueous medium and comparison indicate ion association constants of s-fac > mer. The single-crystal X-ray diffraction structure analysis of 3 reveals the presence of discrete ions ([Co(dien)₂]³⁺, chloride, p-MBz) along with four lattice water molecules. The structure of 3, with formula [Co(dien)₂](p-MBz)₂Cl·4H₂O, consists of alternating layers made of benzoate ions and layers made of [Co(dien)₂]³⁺, chloride and water molecules. These layers result in the formation of their respective columns and intermolecular cohesion of p-MBz within the columns of [Co(dien)₂]³⁺ is achieved via electrostatic and H-bonding interactions.     

Synthesis,characterization and single crystal x-ray analysis of a complex of iron(II) bis(2,4-dimethylphenyl)dithiophosphate with 4-ethylpyridine

Complex of iron(II) bis(2,4-dimethylphenyl)dithiophosphate with 4-ethylpyridine [{(2,4- (CH₃)₂C₆H₃O)2PS2}2Fe{NC₅H₄(C₂H₅)-4}₂] is synthesized and characterized by elemental analysis, magnetic moment, IR spectroscopy and single crystal X-ray analysis. Complex crystallizes in the monoclinic sp. gr. P2₁/n, Z = 2. Crystal structure consists of mononuclear units with Fe(II) ion chelated by four S atoms of the two diphenyldithiophosphate ligands in bidentate manner. N atoms from two 4-ethylpyridine ligands are axially coordinated to the Fe(II) atom leading to an octahedral geometry.     

Behavior of acetyl modified amino acids in reverse micelles: a non-invasive and physiochemical approach

The well-characterized, monodisperse nature of reverse micelles formed by sodium bis-(2-ethylhexyl)sulfosuccinate/water/isooctane and their usefulness in assimilating compounds of varied interests have been exploited to investigate the effect of acetyl modified amino acids (MAA) viz., N-acetyl-L-glycine (NAG), N-acetyl-L-aspartic acid (NAA) and N-acetyl-L-cysteine (NAC), on the water pool and physiochemical properties. Non-invasive techniques such as FTIR and UV-vis absorption spectroscopy have been employed to analyze the interactions of MAA with core water and the AOT headgroup. The micropolarities on both sides of AOT interface have further been investigated by UV-vis absorption probes, methyl orange (MO) and methylene blue (MB). The dynamics of water and temperature induced percolation process have also been studied. The MAA molecules have been found to assist the process with the increase in water content where as a contrary behavior has been observed with the increase in temperature. Conductivity results have been further rationalized in terms of scaling equations, which delineate the dynamic nature of the percolation process. The results have also been analyzed in the light of activation energy of the percolation process and thermodynamics of droplet clustering.     

Synthesis of alkyl 6‐methyl‐4‐(2‐trifluoromethylphenyl)‐1,2,3,4‐tetrahydro‐2H‐pyrimidine‐2‐one‐5‐carboxylates possessing a N‐3 nitro substituent to determine calcium channel modulation structure‐activity relationships

The Bigenelli acid catalyzed condensation of 2‐trifluoromethylbenzaldehyde ( 1 ), urea ( 2 ) and an alkyl acetoacetate ( 3 ) afforded the respective alkyl (Me, Et, i‐Pr, i‐Bu) 6‐methyl‐4‐(2‐trifluoromethylphenyl)‐1,2,3,4‐tetrahydro‐2H‐pyrimidine‐2‐one‐5‐carboxylate ( 4‐7 ). Subsequent N³‐nitration of the alkyl esters ( 4‐7 ) using Cu(NO₃)₂ 3H₂O and Ac₂O furnished the target alkyl 6‐methyl‐3‐nitro‐4‐(2‐trifluoromethylphenyl)‐1,2,3,4‐tetrahydro‐2H‐pyrimidine‐2‐one‐5‐carboxylates ( 8‐11 ). The N³‐nitro compounds ( 8‐11 ) were less potent calcium channel antagonists (IC₅₀ values in the 1.9 × 10^?7 to 3.9 × 10^?6 M range) on guinea pig ileal longitudinal smooth muscle than the reference drug nifedipine (Adalat®, IC₅₀ = 1.4 × 10^?8 M). In vitro calcium channel modulation studies on guinea pig left atrium (GPLA) showed that the methyl and ethyl esters ( 8‐9 ) induced a weak‐to‐modest positive inotropic (agonist) effect, and that the inactive isopropyl ( 10 ) and isobutyl ( 11 ) esters did not alter the cardiac contractile force of GPLA.     

Plasma-induced graft copolymerization of poly(methacrylic acid) on electrospun poly(vinylidene fluoride) nanofiber membrane

Electrospun nanofibrous membranes (ENM) which have a porous structure have a huge potential for various liquid filtration applications. In this paper, we explore the viability of using plasma-induced graft copolymerization to reduce the pore sizes of ENMs. Poly(vinylidene) fluoride (PVDF) was electrospun to produce a nonwoven membrane, comprised of nanofibers with diameters in the range of 200-600 nm. The surface of the ENM was exposed to argon plasma and subsequently graft-copolymerized with methacrylic acid. The effect of plasma exposure time on grafting was studied for both the ENM and a commercial hydrophobic PVDF (HVHP) membrane. The grafting density was quantitatively measured with toluidine blue-O. The degree of grafting increased steeply with an increase in plasma exposure time for the ENM, attaining a maximum of 180 nmol/mg after 120 s of plasma treatment. However, the increase in the grafting density on the surface of the HVHP membrane was not as drastic, reaching a plateau of 65 nmol/mg after 60 s. The liquid entry permeation of water dropped extensively for both membranes, indicating a change in surface properties. Field emission scanning electron microscopy micrographs revealed an alteration in the surface pore structure for both membranes after grafting. Bubble point measurements of the ENM reduced from 3.6 to 0.9 um after grafting. The pore-size distribution obtained using the capillary flow porometer for the grafted ENM revealed that it had a similar profile to that of a commercial hydrophilic commercial PVDF (HVLP) membrane. More significantly, water filtration studies revealed that the grafted ENM had a better flux throughput than the HVLP membrane. This suggests that ENMs can be successfully engineered through surface modification to achieve smaller pores while retaining their high flux performance.