Separation of polyethylene glycol oligomers using inverse temperature programming in packed capillary liquid chromatography

Inverse temperature programming in packed capillary liquid chromatography coupled to evaporative light-scattering detection has been used to resolve native polyethylene glycol (PEG) oligomers. The model compound, PEG 1000, was separated on a 300 mm x 0.32 mm I.D. capillary column packed with 3 microm Hypersil ODS particles with acetonitrile-water (30:70, v/v) as mobile phase. The retention of the PEG oligomers increased with increasing temperature, different from what is commonly observed in liquid chromatography. The retention times of the oligomers were approximately doubled for each 25 degrees C increment of the column temperature in the temperature range 30-80 degrees C. The oligomers were almost unretained and co-eluted at a column temperature of 30 degrees C. At 80 degrees C a baseline separation of more than 22 peaks was obtained, but the last eluting peaks were severely broadened and all oligomers did not elute. When a negatively sloped temperature ramp from 80 to 25 degrees C at -1.5 degrees C/min was applied, the peak shapes were improved, additional peaks were detected and the analysis time was reduced by 48%. In the temperature programming mode, the intra-day precision of the retention times ranged from 0.5 to 5.8% (n=5).     

Determination of bradykinin and arg-bradykinin in rat muscle tissue by microdialysis and capillary column-switching liquid chromatography with mass spectrometric detection

Quantification of bradykinin peptides in limited amounts of rat muscle tissue dialysate has been performed using a packed capillary LC-ESI-TOF-MS method. The micro dialysate samples (450 microL) with added internal standard were loaded onto a 1 mm x 5 mm loading column packed with 5 microm Kromasil C18 particles by a carrier solution of 0.1% formic acid in ACN/water (5:95, v/v) at a flow rate of 250 microL/min for online preconcentration of the analytes. Back-flushed elution onto a 150 mm x 0.5 mm Zorbax C18 column packed with 5 microm particles was conducted using a linear solvent ACN/H2O gradient containing 0.1% formic acid. (Tyr8)-bradykinin was used as an internal standard and was added to the dialysis sample prior to injection. Baseline separation of bradykinin, arg-bradykinin and (tyr8)-bradykinin was achieved within 10 min. Positive ESI was performed in the m/z range of 200-1300. The method was validated in the range 0.2-1.0 ng/mL dialysate, yielding correlation coefficients of 0.995 and 0.990 for bradykinin and arg-bradykinin, respectively. The within-assay and between-assay precisions were between 4.3-9.6% and 6.2-10.6%, respectively. Both arg-bradykinin and bradykinin were detected in dialysate from rat muscle tissue, at concentrations of 0.1 and 0.4 ng/mL for bradykinin and arg-bradykinin, respectively, confirming the presence of arg-bradykinin in rat muscles.     

Temperature optimization for improved determination of phosphatidylserine species by micro liquid chromatography with electrospray tandem mass spectrometric detection

A sensitive method for determination of disaturated phosphatidylserine species in the presence of their monounsaturated analogs has been developed, using micro liquid chromatography coupled to electrospray ionization tandem mass spectrometry. The hydrophobic nature of the phosphatidylserine species required a combination of low-eluting sample solvents and sub-ambient temperatures in order to focus large sample volumes up to 20 microL. The samples were dissolved in 2-propanol:hexane:water (20:10:4, v/v/v) prior to 1:9 dilution with ammonium formate buffer:2-propanol:tetrahydrofuran (30:55:15, v/v/v) and final 1:4 dilution with ammonium formate buffer (10 mM):2-propanol: tetrahydrofuran (55:37.5:7.5, v/v/v). The analytical column was a 0.5 x 150 mm stainless steel column packed with 5 microm C30 particles, while the mobile phase contained ammonium formate buffer (10 mM): 2-propanol:tetrahydrofuran (30:55:15, v/v/v). A temperature program from 5 degrees C (hold for 3 minutes) to 75 degrees C at 8 K/min provided separation of the disaturated phosphatidylserine species from their monounsaturated analogs, making available a sensitive determination of the isobaric species. The mass limit of detection for dipalmitoyl phosphatidylserine was 100 pg, corresponding to a concentration limit of detection of 5 pg/microL when using an injection volume of 20 microL. This is an improvement by a factor of 20 as compared to previously reported numbers obtained with conventional LC columns. The within-assay precision of dipalmitoyl phosphatidylserine was 11.9% RSD (n = 3), while the retention time precision was 4.1% RSD (n = 6).     

Relative Asymmetric Induction in Formation of Substituted Cyclopentanols Via Intramolecular Carjbonyl Additions

Relative asymmetric induction in intramolecular carbonyl addition reactions has been studied for the first time in a systematic fashion. An empirical model has been proposed to rationalize the results.     

Optimization of capillary array electrophoresis single-strand conformation polymorphism analysis for routine molecular diagnostics

Mutation screening is widely used for molecular diagnostics of inherited disorders. Furthermore, it is anticipated that the present and future identification of genetic risk factors for complex disorders will increase the need for high-throughput mutation screening technologies. Capillary array electrophoresis (CAE) SSCP analysis is a low-cost, automated method with a high throughput and high reproducibility. Thus, the method fulfills many of the demands to be met for application in routine molecular diagnostics. However, the need for performing the electrophoresis at three temperatures between 18 degrees C and 35 degrees C for achievement of high sensitivity is a disadvantage of the method. Using a panel of 185 mutant samples, we have analyzed the effect of sample purification, sample medium and separation matrix on the sensitivity of CAE-SSCP analysis to optimize the method for molecular diagnostic use. We observed different effects from sample purification and sample medium at different electrophoresis temperatures, probably reflecting the complex interplay between sequence composition, electrophoresis conditions and sensitivity in SSCP analysis. The effect on assay sensitivity from three different polymers was tested using a single electrophoresis temperature of 27 degrees C. The data suggest that a sensitivity of 98-99% can be obtained using a 10% long chain poly-N,N-dimethylacrylamide polymer.     

Synthesis of functionalized organotrifluoroborates via the 1,3-dipolar cycloaddition of azides

[reaction: see text] We have successfully prepared potassium azidoalkyltrifluoroborates from the corresponding halogen compounds in 94-98% yields through a nucleophilic substitution reaction with NaN(3). In the presence of various alkynes and Cu(I) as a catalyst, these azidotrifluoroborates easily formed 1,4-disubstituted organo-[1,2,3]-triazol-1-yl-trifluoroborates in 85-98% yields. This method was then developed into a facile one-pot synthesis for the preparation of various organo-[1,2,3]-triazol-1-yl-trifluoroborates using haloalkyltrifluoroborates as the starting materials.     

Synthesis of functionalized organotrifluoroborates via halomethyltrifluoroborates

[reaction: see text] Potassium bromo- and iodomethyltrifluoroborates have been prepared via in situ reaction of n-BuLi with dibromo- and diiodomethane, respectively, in the presence of trialkyl borates, followed by treatment with KHF(2). Moreover, a new synthetic method for the preparation of potassium organotrifluoroborates through nucleophilic substitution of the halide in these potassium halomethyltrifluoroborates is described.