Selective extraction and elution of weak bases by in-line solid-phase extraction capillary electrophoresis using a pH step gradient and a weak cation-exchange monolith

A polymer monolith bearing weak cation-exchange functionality was prepared for the purpose of demonstrating pH-selective extraction and elution in in-line solid-phase extraction-capillary electrophoresis (SPE-CE) utilising a model set of cationic analytes, namely imidazole, lutidine and 3-phenylpropanamine. Optimization of the electrolyte conditions for efficient elution of the adsorbed analytes using a moving pH boundary required that the capillary and monolith be filled with 44 mM sodium acetate at high pH (pH 6) and a low pH electrolyte of 3 mM sodium acetate pH 3 was placed in the electrolyte vials. This combination allowed the adsorbed analytes to be simultaneously eluted and focused into narrow bands, with peak widths of the eluted analytes having a baseline width of 1.2 s immediately after the monolith. Using these optimum elution conditions, the versatility of the SPE-CE approach was demonstrated by removing unwanted adsorbed components after extraction with a wash at a different pH and also by selecting a pH at which only some of the model weak bases were ionised. The analytical performance of the approach was evaluated and the relative standard deviation for peak heights, peak area and migration times were in the ranges of 1.4-5.3, 1.2-3.3 and 0.4-1.2% respectively. Analytes exhibited linear calibrations with r(2) values ranging from 0.996 to 0.999 over two orders of magnitude. Analyte pre-concentration provided excellent sensitivity, and limits of detection for the analyte used in this study were in the range 8.0-30 ng ml(-1), which was an enhancement of 63 when compared to normal hydrodynamic injection occupying 1.3% of the capillary of these bases in water.     

Polyimide‐coated magnetic nanoparticles as a sorbent in the solid‐phase extraction of polycyclic aromatic hydrocarbons in seawater samples

Magnetic polyimide poly(4,4′‐oxydiphenylene‐pyromellitimide) nanoparticles were successfully synthesized and developed for the solid‐phase extraction of polycyclic aromatic hydrocarbons in seawater samples. The aromatic rings of polyimide coating provided a good adsorption capacity (28.3–42.5 mg/g) for polycyclic aromatic hydrocarbons because of the π–π stacking interaction. The developed method was used as a simple, fast, and efficient extraction and preconcentration technique for the trace analysis of polycyclic aromatic hydrocarbons. The high chemical, physical and thermal stability, excellent reusability, and good magnetic properties are the merits of the sorbent. High preconcentration factors (41–63) were obtained. The sorbent was also characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, energy dispersive X‐ray spectrometry, transmission electron microscopy, and vibrating sample magnetometry. After optimizing several appropriate extraction parameters, the results indicated that the extraction recoveries of polycyclic aromatic hydrocarbons were in the range of 61.6–94.7%, with relative standard deviations between 2.9 and 5.4%, the calibration graph was linear in the concentration range of 1–100 μg/L (r > 0.9991) with limit of detection in the range of 0.15–0.19 μg/L (n = 3). Seawater samples were analyzed as real samples and good recoveries (68.5–99.5%) were obtained at different spiked values.     

Reliable electrophoretic mobilities free from Joule heating effects using CE

Ionic electrophoretic mobilities determined by means of CE experiments are sometimes different when compared to generally accepted values based on limiting ionic conductance measurements. While the effect of ionic strength on electrophoretic mobility has been long understood, the increase in the mobility that results from Joule heating (the resistive heating that occurs when a current passes through an electrolyte) has been largely overlooked. In this work, a simple method for obtaining reliable and reproducible values of electrophoretic mobility is described. The electrophoretic mobility is measured over a range of driving powers and the extrapolation to zero power dissipation is employed to eliminate the effect of Joule heating. These extrapolated values of electrophoretic mobility can then be used to calculate limiting ionic mobilities by making a correction for ionic strength; this somewhat complicated calculation is conveniently performed by using the freeware program PeakMaster 5. These straightforward procedures improve the agreement between experimentally determined and literature values of limiting ionic mobility by at least one order of magnitude. Using Tris-chromate BGE with a value of conductivity 0.34 S/m and ionic strength 59 mM at a modest dissipated power per unit length of 2.0 W/m, values of mobility for inorganic anions were increased by an average of 12.6% relative to their values free from the effects of Joule heating. These increases were accompanied by a reduction in mobilities due to the ionic strength effect, which was 11% for univalent and 28% for divalent inorganic ions compared to their limiting ionic mobilities. Additionally, it was possible to determine the limiting ionic mobility for a number of aromatic anions by using PeakMaster 5 to perform an ionic strength correction. A major significance of this work is in being able to use CE to obtain reliable and accurate values of electrophoretic mobilities with all its benefits, including understanding and interpretation of physicochemical phenomena and the ability to model and simulate such phenomena accurately.     

Spectroscopic characterization and theoretical simulation of 1,4-diallylquinoxaline-2,3-dione self dimer

Room temperature UV-vis absorption and emission spectra of the 1,4-diallylquinoxaline-2,3-dione (DAQX) are measured in solution at different concentrations. Even at very low concentration (approximately 10(-7)M), DAQX is shown to form ground state van der Waals dimers and excited dimers. These later species do not seem to rearrange into an excimer geometry. The theoretical simulation of the dimer, performed using the analytical atom-atom pair potential described below, predicts a non sandwich face-to-reverse slipped structure with head-to-tail orientation. The allowed absorption transitions, calculated using ZINDO/S package, reproduce satisfactory the experimental spectrum for both the monomer and the simulated dimer.     

Electrospray ionization mass spectrometry of a novel family of complexes in which various nitroso compounds are stabilized via coordination to [IrCl5]2-

Electrospray ionization mass spectrometry (ESI-MS) and tandem mass spectrometry (ESI-MS/MS) data of a unique family of complexes of nitroso compounds coordinated to pentachloroiridate(III), [Cl5IrN(O)XR]2- (X=NH, S, CH and R=alkyl, aryl) are presented. These novel complexes are obtained by nucleophilic attack of primary amines, thiols. and alkenes to the coordinated nitrosyl. Despite their lability and low volatility, MS analysis of complexes of the type MN(O)X was done for the first time, complementing other spectroscopic techniques. The intrinsic dissociation chemistry of the gaseous diagnostic ions was studied via ESI-MS/MS and found to be very useful to confirm the proposed connectivities of the parent complexes. In particular, ESI-MS of their solutions allows the detection of series of diagnostic ions, mainly, [M-Cl]-, [M+K]-, [M-NO]-*, and [M-Cl+AcN]- (AcN=acetonitrile), which confirmed the identity of the analyzed complexes to be M=[Cl5IrN(O)XR]2-. Major fragments were formed by losses of NO or N(O)XR. ESI-MS and ESI-MS/MS measurements are therefore shown to be the proper techniques to complement the spectroscopic characterization of this important class of nitroso complexes. An interesting rearrangement that does not take place in solution was observed in the gaseous phase, and a plausible mechanism is discussed.     

Photo-induced destruction of giant vesicles in methylene blue solutions

We study the photodecomposition of phospholipid bilayers in aqueous solutions of methylene blue. Observation of giant unilamellar vesicles under an optical microscope reveals a consistent pattern of membrane disruption as a function of methylene blue concentration and photon density for different substrates supporting the vesicles.     

Capillary electrophoresis with end-capillary potentiometric detection using a copper electrode.

Potentiometric end-capillary detection in capillary electrophoresis has the advantage of relatively easy miniaturisation without having to compromise the concentration sensitivity. Potentiometric end-capillary detection using a copper electrode is also attractive because of the sensitive detection of many inorganic and organic UV-transparent ions and the ability to work in both direct and indirect mode. In this work, detection of a number of common anions in a tartrate electrolyte at pH 3 was studied. The influence of the end-capillary detection geometry on the detection performance was investigated. An end-capillary detection cell allowing the separation capillary to be changed without the need to realign the detection electrode was constructed and fitted into a commercial CE apparatus. Under the optimal configuration, which was a 25 microm diameter copper electrode aligned coaxially with a 25 microm capillary and positioned at a distance of about 25 microm from the capillary end, excellent peak shapes were achieved and comparison with simultaneous on-capillary photometric detection showed no additional peak broadening. Good sensitivity was obtained, resulting in concentration limits of detection (LODs) in the low microM range and mass LODs in the low amol range. Examples of separations of inorganic and organic anions are presented and the analytical potential of the detection method is assessed.     

On the Additive Group Structure of the Nonstandard Models of the Theory of Integers

Let $\hat \mathbb{Z}$ denote the inverse limit of all finite cyclic groups. Let F, G and H be abelian groups with H ≤ G. Let FβH denote the abelian group (F × H, +^β), where +^βis defined by (a, x) +^β (b, y) = (a + b, x + y + β(a) + β(b) — β(a + b)) for a certain β : F → G linear mod H meaning that β(0) = 0 and β(a) + β(b) — β(a + b) ∈ H for all a, b in F. In this paper we show that the following hold: (1) The additive group of any nonstandard model ℤ* of the ring ℤ is isomorphic to (ℤ*₊/H)βH for a certain β : ℤ*₊/H → $\hat \mathbb{Z}$ linear mod H. (2) $\hat \mathbb{Z}$ is isomorphic to (ℤ₊/H )βH for some β : $\hat \mathbb{Z}$/H →ℚ linear mod H, though $\hat \mathbb{Z}$ is not the additive group of any model of Th(ℤ, +, ×) and the exact sequence H → $\hat \mathbb{Z}$ → $\hat \mathbb{Z}$/H is not splitting.     

Chitosan loaded with silver nanoparticles,CS‐AgNPs,using thymus syriacus,wild mint,and rosemary essential oil extracts as reducing and capping agents

The present study describes the green method for the preparation of chitosan loaded with silver nanoparticles (CS‐AgNPs) in the presence of 3 different extracted essential oils. The essential oils play dual roles as reductant and capping agents. The reducing power and DPPH (2,2‐diphenyl‐1‐picrylhydrazyl) assay for the 3 essential oils—Thymus syriacus (T), wild mint (M), and rosemary (R)—have been reported. The preparation of CS‐AgNPs was performed by 2 steps. The 3 previously extracted essential oils have been used as reducing and capping agent in the first step, while in the second step, silver nanoparticles were integrated in chitosan. The integration of AgNPs in the structure of chitosan was confirmed by ultraviolet‐visible, Fourier transform infrared spectroscopy, scanning electron microscopy techniques, and energy dispersive X‐ray. Surface plasmon resonance confirmed the formation of CS‐AgNPs with maximum absorbance at λ_max between 405 ‐ 410 and 410 ‐ 430 nm for colloidal and films of CS‐AgNPs, respectively. The intensity of bands at 3408 cm^?1 in the fourier transform infrared spectroscopy measurements was decreased substantially and shifted slightly to lower frequency (?υ = 43 cm^?1). Scanning electron microscopy shows a spherical morphology of AgNPs with size of 62 nm for both colloidal and film samples, and energy dispersive X‐ray analysis shows peaks confirming AgNPs formation.