Surface properties of ω-perfluorooctyl-alkyl polyacrylates: odd–even effect

A series of ω-perfluorooctyl-alkyl polyacrylates has been prepared and analysed. The odd–even effect, already observed in the case of liquid crystalline polymers has been exhibited for perfluorinated ones. Values of the contact angles to advanced (θ_a), with withdrawal (θ_r), as well as the contact angle hysteresis (Δθ) of various ω-perfluorooctyl-alkyl polyacrylates in water at 20 °C are described. Contrary to the advancing contact angle which is almost independent of spacer length, the receding one varies strongly with it.     

Flow injection on-line ultrasound-assisted extraction of iron in meat samples coupled to a flame atomic absorption spectrometric system

Iron was extracted on-line from solid meat samples by a simple and rapid continuous ultrasound-assisted extraction system (CUES). The CUES is connected to a flow injection manifold, which allows the on-line flame atomic absorption spectrometric determination of iron. A Plakett–Burman design was used for the optimisation of the CUES. The method achieved a total sampling frequency of 11 samples per hour with a relative standard deviation for the complete procedure of 0.4%. The detection limit was 0.6 g g^–1 (dry mass) for a sample amount of 30 mg. Accurate results were obtained by measuring the certified reference materials BCR-186 (pig kidney) and BCR-184 (bovine muscle). The analytical procedure was applied to different real meat samples with satisfactory results.     

Matrix-isolation FT-IR spectra and theoretical study of dimethyl sulfate

The preferred conformations of dimethyl sulfate and their vibrational spectra were studied by matrix-isolation FT-IR spectroscopy and theoretical methods (DFT and MP2, with basis sets of different sizes, including the quadruple-zeta, aug-cc-pVQZ basis). Conformer GG (of C2 symmetry and exhibiting OSOC dihedral angles of 74.3 degrees ) was found to be the most stable conformer in both the gaseous phase and isolated in argon. Upon annealing of the matrix, the less stable observed conformer (GT; with C1 symmetry) quickly converts to the GG conformer, with the resulting species being embedded in a matrix-cage which corresponds to the most stable matrix-site for GG form. The highest energy TT conformer, which was assumed to be the most stable conformer in previous studies, is predicted by the calculations to have a relative energy of ca. 10 kJ mol-1 and was not observed in the spectra of the matrix-isolated compound.     

Algebraic study of chiral anomalies

The algebraic structure of chiral anomalies is made globally valid on non-trivial bundles by the introduction of a fixed background connection. Some of the techniques used in the study of the anomaly are improved or generalized, including a systematic way of generating towers of descent equations.This work was supported in part by the Director, Office of Energy Research, Office of High Energy and Nuclear Physics, Division of High Energy Physics of the U.S. Department of Energy under contract DE-AC03-76SF00098 and in part by the National Science Foundation under research grant PHY81-18547     

New designs for inhibitors of the NF-κB: DNA binding

We present a series of new inhibitors of the association between nuclear factor kappa B (NF-B) and the corresponding B site in DNA. They were designed using the lead compound 15-deoxy-^12,14 -prostaglandin J₂ (PGJ2), which is a natural product with demonstrated inhibitory efficiency for this system. First, the binding mode of PGJ2 to NF-B was unraveled by GOLD docking calculation. Subsequently, substitutions were made to PGJ2 to optimize its association with NF-B. Care was taken not to strongly increase the reactivity of the new compounds, and to keep the overall shape, size and hydrophilicity of the lead compound, which should render them a similar bioavailability. Molecular mechanics calculations were performed to decide on the suitability of the substitutions, and to evaluate the energies of association with NF-B. Density functional theory calculations were performed also to study the overall reactivity of the substituted drugs towards NF-B. Important general conclusions were obtained, concerning the improvement of these natural inhibitors; namely, a set of rational methodologies were deduced to improve the association between the PGJ2 derivatives and NF-B, and their efficiency demonstrated by generating a set of substituted complexes, some of them with a very much increased affinity for NF-B, opening new doors to enlarge the therapeutic capabilities of this class of drugs.     

Computer experiments on crystalline nylons: structural analysis of nylons with large aliphatic segments

A theoretical study based on force-field calculations has been performed to investigate the structural preferences of crystalline even nylons n with large and very large aliphatic segments. Atomistic energy calculations and Monte Carlo simulations were carried out considering the conventional and forms of nylons 10, 12, 18, 24, and 32. Results indicated that the form is the most favored for nylons 10, 12, 18, and 24. However, the structure was unstable for nylon 32, a polymer in which the density of hydrogen bonds is almost negligible. In this case, the arrangement is energetically more favored than the one.     

Micellar liquid chromatography: suitable technique for screening analysis

The screening capability of micellar liquid chromatography (MLC) is discussed using the reported chromatographic data of several sets of compounds (amino acids, beta-blockers, diuretics, phenethylamines, phenols, polynuclear aromatic hydrocarbons, steroids and sulfonamides) and new results (sulfonamides and steroids). The chromatographic data are treated with an interpretive optimisation resolution procedure to obtain the best separation conditions. Usually, the pH and the concentration of surfactant (sodium dodecyl sulfate, SDS, or cetyltrimethylammonium bromide) for the optimal mobile phase were 2.5-3 and < 0.12 M, respectively. The nature and concentration of organic solvent depended on the polarity of the eluted compounds: a low volume fraction of propanol (approximately 1%, v/v) was useful to separate the amino acids, with log P(o/w) < -1 (where P(o/w) is the octanol-water partition coefficient). A greater concentration of this solvent (approximately 5-7%) was needed for compounds in the range -1 < log P(o/w) < 2, as with the studied diuretics and sulfonamides, and a high concentration of propanol (approximately 15%) or a low concentration of butanol (< 10%) had to be used for less polar compounds with 1 < log P(o/w) < 3, such as the beta-blockers. Pentanol (< 6%) was more suitable for the even less polar compounds with log P(o/w) > 3, such as the steroids. For basic drugs such as the phenethylamines (0 < log P(o/w) < 1.7), eluted with a micellar eluent of anionic SDS, propanol was too weak. A study is also shown for mixtures of sulfonamides (log P(o/w) = -1.2 to 1.7) and steroids (log P(o/w) = 3.0-8.1) eluted from conventional C18 columns with SDS mobile phases containing acetonitrile and 1-pentanol, respectively, which are compared with classical acetonitrile-water and methanol-water mixtures. The results complement a previous study on beta-blockers (log P(o/w) = -0.03 to 2.8) and reveal that MLC is a very competitive technique for the screening of compounds against conventional RPLC, due to its peculiar behaviour with regard to the selectivity and elution strength. The concentration of organic solvent needed to obtain sufficiently low retention times (even for highly hydrophobic steroids with log P(o/w) = 7-8) is also appreciably smaller for MLC, which reduces the environmental impact of the mobile phases.     

Sample preparation for metalloprotein analysis: A case study using horse chestnuts

In the present work, 11 different procedures for protein and metalloprotein extraction from horse chestnuts (Aescullus hippocastanum L.) in natura were tested. After each extraction, total protein was determined and, after protein separation through sodium dodecyl sulphate-polyacrylamide gel electrophoresis (SDS-PAGE), those metals belonging to the protein structure were mapped by synchrotron radiation X-ray fluorescence (SRXRF). After mapping the elements (Cr, Fe and Mn) in the protein bands (ca. 33 and 23.7 kDa), their concentrations were determined using atomic absorption spectrometry (ET AAS).

Good results were obtained for protein extraction using a combination of grinding and sonication. However, this strategy was not suitable to preserve metal ions in the protein structure. In fact, there was 42% decrease on Mn concentration using this procedure, compared to that performed with sample agitation in water (taken as reference). On the other hand, when grinding and agitation with an extracting buffer was used, there was a 530% increase of Mn concentration, when compared to the reference procedure.

These results indicate agreement between metal identification and determination in proteins as well as the great influence of the extraction procedure (i.e., the sample preparation step) for preserving metals in the protein structures.     

The influence of the brewing process on the formation of biogenic amines in beers

Biogenic amines, as dabsyl derivatives, were determined in beer samples, intermediate products, and raw materials (malt and maize) by HPLC. A procedure for the extraction of the amines from malt and maize with diluted hydrochloric acid was optimised by combining a Response Surface Methodology with a Simultaneous Decision Making Approach. The results of the analysis indicate that, in brewing, technology and hygiene are the decisive factors that determine the amine concentrations in the final product.