SURFACE METALLIZATION OF CENOSPHERES AND PRECIPITATORS BY ELECTROLESS PLATING

This paper reports the use of a colloidal Pd^0 catalysis system to metallize the surface of precipitators separated from coal fly-ash, and metals such as Cu, Ni etc. are deposited on the precipitators surface. Alternatively, according to the characteristic surface of cenospheres, an Ag coating catalysis system is adopted to first deposit Ag on the cenospheres surface, followed, if necessary, by the deposition of other metals such as Cu, Ni, etc. on the Ag coating to produce monolayer and multilayer metal-coated cenospheres. The surface characteristics and the morphologies of the metal coatings are examined in detail with scanning electron microscopy (SEM), energy dispersive spectroscopy (EDX) and X-ray photoelectron spectroscopy (XPS) techniques. It can be shown that the quality of metal coatings derived from the Aa coatina catalysis system, is better than that of the colloidal Pd^0 catalysis system.     

有向图上的随机游动

设G=(V,Г)是有向图,G上的随机游动X(G)定义如下:位于某个顶点上的一个粒子将以等概率转移到该顶点的所有后继顶点.令M(j,n)表示随机游动X(G)在前n步内访问顶点j的平均次数,用W(j)表示随机游动X(G)到达顶点j所需要的平均步效.我们对M(j,n)和W(j)的值进行了估计,证明了M(j,n)=O(n),并给出了W(j)的上界.     

指数型寿命数据中异常值的检验

本文讨论了在指数型寿命数据中,对同时存在的异常大数据和异常小数据的检验方法,给出了一个明确的判别标准,并以一例说明其应用。     

Effects of Post-Thermal Treatment on Quality of SiC Grown by PVT Method

We report the effects of post-thermal treatment on the quality of 2-inch 6H-SiC wafer cut from a crystal boule grown by physical vapour transportation method. The full widths at half maximum of x-ray diffraction rocking curves measured on sites across the 2-inch wafer become narrower, indicating the quality improvement after a three-step post-thermal treatment. It is found that the most common defects such as micropipes and inclusions can be significantly reduced after the treatment. Our results show that the post-thermal treatment is an effective route to improve the quality of SiC single crystals.     

Frame Wavelets with Compact Supports for L^2（R^n）

The construction of frame wavelets with compact supports is a meaningful problem in wavelet analysis. In particular, it is a hard work to construct the frame wavelets with explicit analytic forms. For a given n × n real expansive matrix A, the frame-sets with respect to A are a family of sets in R^n. Based on the frame-sets, a class of high-dimensional frame wavelets with analytic forms are constructed, which can be non-bandlimited, or even compactly supported. As an application, the construction is illustrated by several examples, in which some new frame wavelets with compact supports are constructed. Moreover, since the main result of this paper is about general dilation matrices, in the examples we present a family of frame wavelets associated with some non-integer dilation matrices that is meaningful in computational geometry.     

70个南天旋涡星系等值厚度的测定

利用彭秋和提出的方法以及分析星系的旋涡图样 ,得到 70个南天旋涡星系的等值厚度 ,这些星系的图象是从北京天文台兴隆观测站Palomar天图数字光盘 (theDigitizedSkySurvey)中读出的 .为了得到星系的最佳倾角 (星系平面与天球切平面之间的夹角 ) ,把用最小二乘法拟合得到的对数螺线画在星系图象上与旋臂进行比对 ,反复调节星系的倾角 ,使拟合得到的对数螺线能很好地与旋臂吻合 ,从而得出星系的最佳倾角.     

考虑流体湿润性影响的核沸腾RohsenoW修正模型

添加界面活性剂的核沸腾在改变蒸气泡生长特性的同时，主要是强化了对流换热．本文考虑流体湿润性影响，对核沸腾换热沿用最广的对流类比模型－Ｒｏｈｓｅｎｏｗ模型进行了修正．通过对实验数据的检验，表明修正后的模型预示值与实测结果吻合很好．     

荧光光纤温度传感器激励光源的选择

本文分析计算了荧光光纤温度传感器的温敏元件——GsAlAs/GaAs双异质结半导体材料的荧光辐射效率与激励光波长的关系。讨论了温度测量范围及温敏元件GaAlAs层铝含量对激励光源的限制,在0～200℃测温范围内,若采用LED作激励光源,其峰值波长应在0.70～0.76μm之间选择。     

Design and Fabrication of 1.06 μm Resonant-Cavity Enhanced Reflective Modulator with GaInAs/GaAs Quantum Wells

A resonant-cavity enhanced reflective optical modulator is designed and fabricated, with three groups of three highly strained InGaAs/GaAs quantum wells in the cavity, for low voltage and high contrast ratio operation. The quantum wells are positioned in antinodes of the optical standing wave. The modulator is grown in a single growth step in an molecular beam epitaxy system, using GaAs/AlAs distributed Bragg reflectors as both the top and bottom mirrors. Results show that the reflection device has a modulation extinction of 3 dB at -4.5 V bias.     

T-RBAC访问控制模型及其约束描述语言

一种结合了基于任务的访问控制模型TBAC和基于角色的访问控制模型RBAC特点的新型访问控制模型-T-RBAC.该模型采用了以任务为中心的"用户-角色-任务-权限"的四级访问控制结构,较好地解决了当前工作流系统中存在的安全性问题.此外,在新模型的基础上设计了一套描述约束机制的语言ETCL,该语言在RCL2000的基础上扩充了时间特性和任务的概念,使新模型具备了较完整的约束描述能力.