单螺杆发动机在不同进气压力下的实验研究

为了改善原有气动发动机的缺陷,提出了一种新型的气动发动机—单螺杆膨胀机,其具有容积效率高、结构控制简单、噪声低、寿命长等特点。为了测试单螺杆膨胀机的各项性能,建立了单螺杆膨胀机压缩空气动力系统,对膨胀机在不同进气压力下进行了实验研究.实验结果表明:随着进气压力升高膨胀机输出功率及总效率升高,而气耗率下降,即膨胀机在高进气压力下具有较好的动力性能、经济性能和较高的总效率。     

Passively Q-Switched Tm,Ho：YVO4 Laser with Cr：ZnS Saturable Absorber at 2 μm

A stable diode-pumped passively Q-switched Tm,Ho：YVO4 laser with Cr：ZnS saturable absorber is reported. The shortest pulse duration of -500 ns with the central wavelength of 2041 nm is obtained at the pump power of 7.4 W, corresponding to the pulse energy of 3.5 μd at repetition rate of 65 kHz.     

混合悬浮液中纳米颗粒对核化形态的影响

均相沸腾活化核心的形成靠液体分子(或密度)脉动形成,低过热温度下临界活化核心比纳米颗粒本身粒径要大很多,颗粒添加的影响相对很小,依旧保持为均相沸腾。随着液体过热温度的增加至临界活化核心与颗粒尺寸可比时,颗粒才有可能成为新的活化核心,液体内部的均相沸腾也转变为非均相沸腾,但在考虑颗粒吸附的情况下,颗粒的吸附会使表面部分核化中心失去活性,弱化了原有非均相核化。     

Yb原子奇宇称受扰里德堡系n^1P1,n^3P1能级自然辐射寿命的研究

通过激光与原子束相互作用，三步激发及时间分辨光谱术，测量了Ｙｂ原子奇宇称受扰里德堡系６ｓｎｐ＾１，３Ｐ１２１个能级和两上干扰能级的自然辐射寿命，分析了各种因素对测量值的影响。     

碘分子吸收光谱研究

我们用HRD-1型双光栅单色仪记录了碘分子在可见光区域的吸收光谱。确定了大量的带头,由此得出了碘分子的离解限、离解能、力常数和振动基频。实验结果与理论结果很符合。     

Organic Light Emitting Diodes with an Organic Acceptor/Donor Interface Involved in Hole Injection

Organic light emitting diodes with an interface of organic acceptor 3-, 4-, 9-,10-perylenetetracarboxylic dianhydride （PTCDA） and donor copper phthalocyanine （CuPc） involved in hole injection are fabricated. As compared to the conventional device using a 5 nm CuPc hole injection layer, the device using an interface of 10nm PTCDA and 5 nm CuPc layers shows much lower operating voltage with an increase of about 46% in the maximum power efficiency. The enhanced device performance is attributed to the efficient hole generation at the PTCDA/CuPc interface. This study provides a new way of designing hole injection.     

Fusion Reaction of ^16O＋^14N and Its Implication for the Production of ^26Al in Explosive Oxygen Burning

We suggest that the fusion reaction ^16O＋^14N may be a new way to produce ^26Al in interstellar medium. Adopting different mixing modes, we investigate the impact on the production of ^26Al in explosive oxygen burning and find that the result is extremely sensitive to mixing mechanisms. In some cases, we obtain an encouraging result, for example, the greatest final abundance of ^26Al reaches 7.779×10^-6, which means that the explosive oxygen burning may be a new origin of ^26 Al.     

Effect of Molecular Weight on Liquid Crystal Photoalignment by Photosensitive Polyester Containing Thrifluoromethyl Moieties

We investigate the liquid-crystal （LC） alignment direction on photoalignment films formed from photosensitive polyester containing thrifluoromethyl moieties （PPDA） with various molecular weights by crossed polarized optical microscopy. It is found that LC alignment behaviour changes with molecular weight of PPDA. The LC alignment on PPDA irradiated films with the highest molecular weight is homogeneous, while those with low and intermediate molecular weights are homeotropic. However, surface morphologies show weak dependence on molecular weight. The surfaces are smooth and there is no clear morphological anisotropy on these aligned films observed by an atomic force microscope. The surface energies of the irradiated films are also measured by using an indirect contact-angle method where both surface energy and its polar component, increase with increasing molecular weight. Different polar surface energies can be considered as a main reason for different alignment characteristics.     

Time-resolved measurement of atomic emission enhancement by fs--ns dual-pulsed laser-induced breakdown spectroscopy

Time-resolved measurement of atomic emission enhancement is performed by using a 500-fs KrF laser pulse incident upon a high density supersonic O_{2} gas jet, synchronized with an orthogonal ns frequency-doubled Nd:YAG laser pulse. The ultra-short pulse serves as an igniter of the gas jet, and the subsequent ns-laser pulse significantly enhances the atomic emission. Analysis shows that the contributions to the enhancement effect are made mainly by the bremsstrahlung radiation and cascade ionization.     

带光纤环的分布式光纤拉曼温度系统

 为了抑制分布式光纤拉曼温度系统的温漂和瑞利散射光窜扰反斯托克斯散射光,在传感光纤前端盲区后放置光纤取样环,用瑞利散射光解调反斯托克斯散射光及用光纤取样环的温度计算光纤线上其它点的温度,提高了系统的测温精度和稳定性。采用功率100 mW,波长1.55 μm,脉宽10 ns脉冲激光器和15 dB前置光纤放大器,100M14bitA/D转换卡及DSP作数字平均构建光纤拉曼温度系统的实验,实现了测温误差在±0.03 ℃内。