Processi ergodici non stazionari e loro proprietà

Sunto Si stabilisce la condizione necessaria e sufficiente per l’equivalenza ad una costante della media empirica di una qualunque funzione misurabile, in un processo discreto Lavoro eseguito per la realizzazione del programma del gruppo n^o 9 del C. N. R. (1961–62).     

Parton distributions and new physics searches: the Drell–Yan forward–backward asymmetry as a case study

We present the first unquenched lattice-QCD calculation of the form factors for the decay \(B\rightarrow D^*\ell \nu \) at nonzero recoil. Our analysis includes 15 MILC ensembles with \(N_f=2+1\) flavors of asqtad sea quarks, with a strange quark mass close to its physical mass. The lattice spacings range from \(a\approx 0.15\) fm down to 0.045 fm, while the ratio between the light- and the strange-quark masses ranges from 0.05 to 0.4. The valence b and c quarks are treated using the Wilson-clover action with the Fermilab interpretation, whereas the light sector employs asqtad staggered fermions. We extrapolate our results to the physical point in the continuum limit using rooted staggered heavy-light meson chiral perturbation theory. Then we apply a model-independent parametrization to extend the form factors to the full kinematic range. With this parametrization we perform a joint lattice-QCD/experiment fit using several experimental datasets to determine the CKM matrix element \(|V_{cb}|\). We obtain \(\left| V_{cb}\right| = (38.40 \pm 0.68_{\text {th}} \pm 0.34_{\text {exp}} \pm 0.18_{\text {EM}})\times 10^{-3}\). The first error is theoretical, the second comes from experiment and the last one includes electromagnetic and electroweak uncertainties, with an overall \(\chi ^2\text {/dof} = 126/84\), which illustrates the tensions between the experimental data sets, and between theory and experiment. This result is in agreement with previous exclusive determinations, but the tension with the inclusive determination remains. Finally, we integrate the differential decay rate obtained solely from lattice data to predict \(R(D^*) = 0.265 \pm 0.013\), which confirms the current tension between theory and experiment.

     

Antimicrobial Effect and Cytotoxic Evaluation of Mg-Doped Hydroxyapatite Functionalized with Au-Nano Rods

Hydroxyapatite (HA) is the main inorganic mineral that constitutes bone matrix and represents the most used biomaterial for bone regeneration. Over the years, it has been demonstrated that HA exhibits good biocompatibility, osteoconductivity, and osteoinductivity both in vitro and in vivo, and can be prepared by synthetic and natural sources via easy fabrication strategies. However, its low antibacterial property and its fragile nature restricts its usage for bone graft applications. In this study we functionalized a MgHA scaffold with gold nanorods (AuNRs) and evaluated its antibacterial effect against S. aureus and E. coli in both suspension and adhesion and its cytotoxicity over time (1 to 24 days). Results show that the AuNRs nano-functionalization improves the antibacterial activity with 100% bacterial reduction after 24 h. The toxicity study, however, indicates a 4.38-fold cell number decrease at 24 days. Although further optimization on nano-functionalization process are needed for cytotoxicity, these data indicated that Au-NRs nano-functionalization is a very promising method for improving the antibacterial properties of HA.     

Molecular modeling of oligopeptide adsorption onto functionalized quartz surfaces

The adsorption of an EAK 16-II oligopeptide sequence in aqueous medium onto functionalized quartz surfaces has been studied by using force field calculations and molecular dynamics methods. Two different surfaces have been simulated respectively involving fully methylated and fully silanolic quartz surfaces. Geometry optimization and molecular dynamics simulations showed that the adsorption process is mainly governed by the electrostatic interactions between SiO- surface groups and the charged residues of the oligopeptide sequence. In particular, it was found that strong electrostatic interactions (a) prompt the parallel orientation of the oligopeptide with respect to the hydrophilic charged surface, resulting in an effective physisorption process and (b) stabilize the beta-sheet configuration of the physisorbed molecules. In particular, the end-on oligopeptide orientations are demonstrated to progressively lie back onto the hydrophilic surface, but this does not happen onto the hydrophobic surface. In any case, no physisorption process was observed for the fully methylated surface, where the molecule is seen to move away from the surface during the simulation time.     

Effects of ethylene polymerization conditions on the activity of SiO2-supported zirconocene and on polymer properties

The effects of polymerization conditions were evaluated on the production of polyethylene by silica-supported (n-BuCp)₂ZrCl₂ grafted under optimized conditions and cocatalyzed by methylaluminoxane (MAO). The Al : Zr molar ratio, reaction temperature, monomer pressure, and the age and concentration of the catalyst were systematically varied. Most reactions were performed in toluene. Hexane, with the addition of triisobutilaluminum (TIBA) to MAO, was also tested as a polymerization solvent for both homogeneous and heterogeneous catalyst systems. Polymerization reactions in hexane showed their highest activities with MAO : TIBA ratios of 3 : 1 and 1 : 1 for the homogeneous and supported systems, respectively. Catalyst activity increased continuously as Al : Zr molar ratios increased from 0 to 2000, and remained constant up to 5000. The highest activity was observed at 333 K. High monomer pressures (≈ 4 atm) appeared to stabilize active species during polymerization, producing polyethylenes with high molecular weight (≈ 3 × 10⁵ g mol⁻¹). Catalyst concentration had no significant effect on polymerization activity or polymer properties. Catalyst aging under inert atmosphere was evaluated over 6 months; a pronounced reduction in catalyst activity [from 20 to 13 × 10⁵ g PE (mol Zr h)⁻¹] was observed only after the first two days following preparation. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1987–1996, 1999     

Motorcycle brake squeal: experimental and numerical investigation on a case study

Since, nowadays, the NVH performance of a vehicle is one of the most important priorities for the market, the noise radiating from disc brakes is considered a source of considerable discomfort and customer dissatisfaction. Squeal is an example of noise, caused by vibrations induced by friction forces, in which the vibration modes of the brake disc are coupled to those of the friction pads or of the caliper. In this work a case study, in which the squeal phenomenon was detected after changing the supplier of the disc pads, is presented. A test bench was purposely developed to investigate the squeal phenomenon; tests at different rotating speeds and pressures in the brake circuit were carried out employing different friction pads. The experimental apparatus appeared capable of reproducing the phenomenon observed in real practice and to investigate the effect of operating parameters and different components on the onset of instability. Friction tests and geometric analysis of the friction pads were also carried out to complete the investigation. At the same time, a finite element (FE) complex eigenvalue parametric analysis was performed on the brake assembly. The different propensity of the pads to squeal was attributed to differences in their geometry and in their friction coefficients. The FE analysis, confirmed the experimental observations and indicated possible design improvements to increase the stability of the system.     

Honey as a candidate reference material for trace elements.

The feasibility of producing and certifying new certified reference materials (CRMs) for trace elements in honey was investigated. Preliminary steps for preparation of candidate materials are performed at the Institute for Reference Materials and Measurements, Joint Research Centre of the European Commission (EC-JRC-IRMM). Two different types of honey, Acacia and Eucalyptus, were tested for determination of 10 trace elements. To each type of honey was added a given amount of high purity deionized water to obtain aqueous solutions with an acceptable degree of homogeneity which would require only minimal manipulation before analysis. Average values obtained for the trace elements by means of inductively coupled plasma-based techniques were as follows (in microg/ kg +/- SD): Acacia honey, As, 1.10+/-0.20; Cd, 0.328+/-0.035; Cr, 1.90+/-0.22; Cu, 67.0+/-5; Fe, 215+/-30; Hg, < 0.75; Mn, 82.1+/-6.2; Ni, 21.0 3.0; Pb, 2.30+/-0.25; Se, 9.10+/-1.2; Zn, 167+/-22; Eucalyptus honey, As, 5.99+/-0.10; Cd, 0.592+/-0.074; Cr, 1.50+/-0.07; Cu, 219 24; Fe, 1008+/-114; Hg, <0.75; Mn, 1009+/-51; Ni, 11.3+/-1.5; Pb, 5.00+/-0.40; Se, 5.60+/-0.91; Zn, 791+/-91. When these 2 pilot materials are ready, the certification project will be launched in full compliance with current rules set by EC-JRC-IRMM. If the project is successful, the new CRMs will be put primarily at the disposal of the National Reference Laboratories for trace elements.     

A pilot study for the production of a certified reference material for trace elements in honey

In the context of the general mandate of the European Union Community Reference Laboratory (CRL) for residues in living animals and their products established at the Istituto Superiore di Sanità, a pilot study was undertaken to assess the possibility of producing a new certified reference material (CRM) for trace elements in a matrix of honey. The elements considered were As, Cd, Cr, Cu, Fe, Mn, Ni, Pb, Sn, V and Zn. Their determination was performed by inductively coupled plasma (ICP)-based techniques. Data obtained with different ICP techniques were generally in good agreement. In light of these results, the next step was the effective production of a candidate CRM in a honey matrix. In the preliminary phase, two different types of honey, i.e., Eucalyptus (solid and sticky) and Robinia (viscous and sticky), were pretreated at the Institute for Reference Materials and Measurements, Joint Research Centre, European Commission (EC-JRC-IRMM) in order to produce the materials candidate for the certification process. Approximately 600 ampoules were thus produced for the Robinia honey and 450 ampoules for the Eucalyptus honey, each ampoule containing 5 g of an aqueous solution of honey (with 20% and 30% high purity water, respectively) and sealed under inert gas (Ar). A ring test to determine the levels of the chemical elements and a long-term study to evaluate the stability of the samples is in progress. Tentative figures for the analytes of interest are (in ng g⁻¹): Robinia, As, 1.28±0.09; Cd, 0.59±0.08; Cr, 2.36±0.21; Cu, 57.6±3.2; Fe, 209±9; Mn, 90.8±3; Ni, 18.1±0.6; Pb, 23±1.5; Sn, 8.10±0.35; V, 1.19±0.37; and Zn, 178±4; Eucalyptus, As, 3.18±0.21; Cd, 0.70±0.08; Cr, 2.73±0.22; Cu, 141±6; Fe, 926±16; Mn, 1905±81; Ni, 7.77±0.4; Pb, 138±4; Sn, 7.97±0.16; V, 3.47±0.15; and Zn, 405±9.