乳糖修饰壳聚糖微载体的制备及对培养肝细胞代谢活性的影响

液体石蜡作分散介质。戊二醛作交联刑，通过反相悬浮聚合制备了微米级的壳聚糖微载体．环氧氟丙烷活化后，乳糖进行修饰．用孔糖修饰的微载体进行原代大鼠肝细胞培养，利用相差显微镜对培养细胞进行形态观察，并测定肝细胞的代谢活性，结果显示，乳糖修饰壳聚糖微载体是一种优良的肝细胞培养支架．     

Study on the in—plane electrical resistivity and thermoelectric power in single crystals of La2—xBaxCuO4

The in-plane electrical resistivity and thermoelectric power have been measured on single crystals of La_2-xBa_xCuO₄ at around x=0.125. The room temperature resistivity and thermopower have their maximum values at x=0.125, indicating that the carrier concentration is the minimum and the carriers are most strongly localized at x=0.125. The observed semiconductor-like behaviour can be well described by the weak-localized quasi-two-dimensional state. The steep rise in electric resistivity of the sample at x=0.125 below 70K is attributed to the formation of static stripe-order of holes and spins, which are pinned by the low-temperature tetragonal (LTT) structure, as discovered in La_1.48Nd_0.4Sr_0.12CuO₄. The temperature dependence of electric resistivity below 70K is still well described by the formula ρ∝ lnT. A definite change in the slope of thermopower is observed at the low-temperature orthorhombic-LTT structural phase transition temperature. The origin of the 1/8 anomaly is discussed in the text.     

Growth of NaBi（WO4）2 Dendrite and Mechanism

The solid-liquid interface motion of NaBi（WO4）2 （NBWO） melt crystal growth is observed in an in situ system, in which the whole processes of interface transition from fiat interface and cellular to dendrite are visualized. The spacing of the dendrite under smaller temperature gradient turns out to be larger than that under larger temperature gradient, which is found to be sensitive to the temperature distribution. The mechanism of dendrite growth of NBWO is studied based on the model of the growth units of anion coordination polyhedra. The { 001} face has two apex links, so it shows higher stability and has high growth rate and forms the arm of dendrite, whereas the {010} face has only one apex link, and thus shows relative slower growth rate and firstly forms the branches.     

轻型汽车后桥半轴断裂件的组织及断口特征

采用光学显微镜和扫描电子显微镜等手段，对某轻型汽车40Cr后桥半轴断裂件的组织及断口特征进行了分析结果表明：半轴在调质处理时的淬火温度不够高，使其表层和心部组织中存在较多的铁素体相，造成了工件最终的硬度和疲劳强度不足，导致半轴在使用中发生扭转疲劳断裂．     

基于Internet/Intranet的大学物理实验系统

利用计算机技术、传感技术和校园网，将现代教育技术引入大学普通物理实验教学中，实现实验数据的自动采集，基于网络的实验预习和实验报告写作、递交、批改及管理等功能．     

团队实验教学探讨

从教学设计、教学过程、教学效果等方面探讨了在普通物理实验实施团队教学的必要性和实施方法．实践表明，团队实验教学对培养学生的综合素质有积极的作用。     

sl玻色子体系在U(2l+1)O(2l+2)过渡区的严格解

利用无穷维李代数方法得到了相互作用sl玻色子体系在U( 2l+ 1 ) O( 2l+ 2 )过渡区的能谱和波函数的严格解 .给出了该系统Bethe假定方程的数值解法 .     

HL—1装置碳化和采用抽气孔栏时的可见辐射观测

本文描述了HL-1装置器壁碳化和采用抽气孔栏时,氢及杂质通量的变化情况;利用多道可见辐射的时空分布测量,得到了MARFE放电,在产生MARFE时,辐射热也相应增强。     

In situ observation of NaBi(WO4)2 dendrite growth and the study on microstructure of solidification

The dendrite growth process of transparent NaBi(WO4)2 with small prandtl and high melting point was studied by using the in-situ observation system. According to the dynamic images and detailed information, there are two kinds of restriction effect on the dendrite growth, the competition between arms and branches and the convection in the melt. The dendrite growth rate was time dependent, and the rate of arm growth reached the maximum 5.8 mm/s in the diffusive-advective region and rapidly decreased in the diffusive-convective region. The growth rate of branch had the same change trends as the arm's. Based on the EPMA-EDS data of solidification structure of quenched NaBi(WO4)2 melt, it was found that there were component differences from stoichiometric concentration in the melt near the interface during the growth process.     

一类三参数混沌动力学系统模型及其在经济增长研究中的应用

从非线性自回归模型Xt+1=-αXtλ+1+βXt+γ出发,通过变量替换Xt=aYt,推出三参数混沌动力学系统模型Yt+1=kYt(1-Ytλ)+c;采用线性回归与非线性回归相结合的改进的混合法,对模型参数作了估计;实际研究表明,该模型可以用于对国内生产总值GDP增长的研究.