关于鞍点问题的预处理HSS-SOR交替分裂迭代方法

为了高效地求解大型稀疏鞍点问题,在白中治,Golub和潘建瑜提出的预处理对称/反对称分裂(PHss)迭代法的基础上,通过结合SOR-like迭代格式对原有迭代算法进行加速,提出了一种预处理HSS-SOR交替分裂迭代方法,并研究了该算法的收敛性.数值例子表明:通过参数值的选择,新算法比SOR-like和PHSS算法都具有更快的收敛速度和更少的迭代次数,选择了合适的参数值后,可以提高算法的收敛效率.     

ZnFe2O4/Ag/TiO2复合材料的制备及其光催化性能

以硝酸银、钛酸四丁酯、无水氯化锌、六水氯化铁为原料,采用溶胶-凝胶法与溶剂热相结合的方法制备了ZnFe₂O₄/Ag/TiO₂复合材料,通过扫描电子显微镜、能谱分析仪、X射线粉末衍射仪、X射线光电子能谱仪、振动样品磁强计、紫外可见分光光度计对样品进行表征及测试。结果表明： ZnFe₂O₄/Ag/TiO₂-10具有最佳的光催化效果,在紫外和可见光下对染料的降解率都能达到90%以上,具有优异的紫外可见光光催化活性。ZnFe₂O₄/Ag/TiO₂具有独特的磁性,能在外部磁场作用下进行回收利用,这使其在实际应用中成为可能。通过磁分离技术重复回收利用5次后仍然保持优良的光催化性能,说明ZnFe₂O₄/Ag/TiO₂-10具有优异的磁性及较高的光催化循环稳定性。     

基于1-(2-吡啶甲基)-1, 2, 4-三唑的金属有机化合物的合成及反应研究

本文合成了1-（2-吡啶甲基）-1,2,4-三唑（L）,并研究了其与有机锡和羰基钼（钨）的配位反应,合成了通过三唑4位氮原子以单齿形式配位的有机锡衍生物L₂SnR₂Cl₂（R=Me,n-Bu或Ph）和羰基金属配合物LM（CO）₅（M=Mo或W）,以及N,N螯合双齿配位的四羰基金属配合物LM（CO）₄。当用氯化苄处理L时,制得了相应的三唑盐,该盐用氧化银处理后与M（CO）₅THF或M（CO）₄（NHC₅H₁₀）₂（NHC₅H₁₀为哌啶）反应,得到了基于三唑的氮杂环卡宾衍生物L’M（CO）₅和L’M（CO）₄（L’=1-（2-吡啶甲基）-4-苄基-1,2,4-三唑-5-碳烯）。X-射线单晶衍射分析表明,在L’M（CO）₅中氮杂环卡宾配体L’表现为通过卡宾碳配位的单齿配体;而在L’M（CO）₄中,L’表现为通过卡宾碳和吡啶氮原子配位的螯合[C,N]双齿配体。     

氨基三唑分子印迹聚合物的制备及性能表征

采用分子印迹技术,以氨基三唑(AMI)为模板分子,异丁醇为溶剂,甲基丙烯酸(MAA)为功能单体,乙二醇二甲基丙烯酯(EDMA)为交联剂,合成了氨基三唑分子印迹聚合物(AMI-MIP)。采用静态平衡结合实验和选择性实验评价了AMI-MIP对底物分子的结合特性及分子识别性能,并进行了吸附动力学研究。结果表明,AMI-MIP对AMI存在不同亲和力的两类结合位点,且对AMI具有很高的选择吸附特性和良好的分子识别性能,AMI-MIP对AMI的吸附行为可用准二级吸附动力学方程加以描述。     

不饱和聚酯型人造大理石研究进展

综述了不饱和聚酯型人造大理石的研究进展;回顾了人造大理石的研究现状,指出了其制备研究中存在的性能及工艺缺陷;分析了填料种类、混合填料粒径、黏结剂及制备工艺对人造大理石强度、韧性、斑印及吸水率等性能的影响,并就未来聚酯型人造大理石的性能改进及工艺优化进行了展望.     

Identification of urinary metabolites of imperatorin with a single run on an LC/Triple TOF system based on multiple mass defect filter data acquisition and multiple data mining techniques

The detection of drug metabolites, especially for minor metabolites, continues to be a challenge because of the complexity of biological samples. Imperatorin (IMP) is an active natural furocoumarin component originating from many traditional Chinese herbal medicines and is expected to be pursued as a new vasorelaxant agent. In the present study, a generic and efficient approach was developed for the in vivo screening and identification of IMP metabolites using liquid chromatography-Triple TOF mass spectrometry. In this approach, a novel on-line data acquisition method mutiple mass defect filter (MMDF) combined with dynamic background subtraction was developed to trace all probable urinary metabolites of IMP. Comparing with the traditionally intensity-dependent data acquisition method, MMDF method could give the information of low-level metabolites masked by background noise and endogenous components. Thus, the minor metabolites in complex biological matrices could be detected. Then, the sensitive and specific multiple data-mining techniques extracted ion chromatography, mass defect filter, product ion filter, and neutral loss filter were used for the discovery of IMP metabolites. Based on the proposed strategy, 44 phase I and 7 phase II metabolites were identified in rat urine after oral administration of IMP. The results indicated that oxidization was the main metabolic pathway and that different oxidized substituent positions had a significant influence on the fragmentation of the metabolites. Two types of characteristic ions at m/z 203 and 219 can be observed in the MS/MS spectra. This is the first study of IMP metabolism in vivo. The interpretation of the MS/MS spectra of these metabolites and the proposed metabolite pathway provide essential data for further pharmacological studies of other linear-type furocoumarins.     

Novel Synthesis of Aza-phthalimidine Hydroxylactams

A novel and convenient synthetic route for preparing aza-phthalimidine hydroxylactams (5a–j) by N-bromosuccinimide (NBS) was developed. This method involved the substitution reactions of substrates (3a–j) with NBS via unstable intermediate bromides (4a–j) rapidly hydrolyzed into hydroxyl products in the course of the workup process.     

Synthesis, Crystal Structure and Antibacterial Activity of Two Hydrazones Derived from 2-Fluorobenzhydrazide

Two new Schiff base benzoyl hydrazone compounds, C14H10FN3O3 (Ⅰ) and C14H10F2N2O (Ⅱ), have been synthesized and characterized by elemental analysis, IR, UV and X-ray single-crystal diffraction. Both compounds crystallize in monoclinic, space group P21/c with a = 7.0514(14), b = 25.928(5), c = 7.7099(15), β = 111.823(2)°, V = 1308.6(4)3, Z = 4, C14H10FN3O3, Mr = 287.25, Dc = 1.458 g/cm3, μ(MoKα) = 0.115 mm-1, F(000) = 592, the final R = 0.0841 and wR = 0.2489 for 1901 observed reflections (I > 2σ(I)) for I; a = 11.232(3), b =12.735(4), c = 8.612(2) , β = 90.869(3)°, V = 1231.7(6)3, Z = 4, C14H10F2N2O, Mr = 260.24, Dc = 1.403 g/cm3, μ(MoKα) = 0.111 mm-1, F(000) = 536, the final R = 0.0453 and wR = 0.1085 for 1317 observed reflections (I > 2σ(I)) for Ⅱ. The antibacterial activities of both compounds against two bacteria were first studied and one compound showed considerable antibacterial activity against K. Pneumonia and S. aureus.     

Effect of Precursor Drying Process on the Properties of LiFePO4/C Composite with Low Carbon Content

<正>Properties of two LiFePO_4/C composites with low carbon content synthesized from precursors dried by spray drying and blast drying are investigated by scanning electron microscopy, X-ray diffraction, Raman spectroscopy and electrochemical measurements. The two samples have a different morphology and particle size, while the structure of LiFePO_4 is unaffected. The LiFePO_4/C composite prepared from the precursor dried by blast drying has a much lower surface resistance and a much better rate capability because the deposited carbon is more graphite-like and more conductive. The cycling performance is also much better for the LiFePO_4/C composite prepared from the precursor dried by blast drying because only a slight impedance growth is involved upon cycling. These results suggest that the precursor drying process has a significant impact on the properties of LiFePO_4/C composite, and its effect is highly dependent on the carbon content.     

Dynamic Electrosorption Analysis as an Effective Means to Characterise the Structure of Bulk Graphene Assemblies

Restacking of graphene sheets to a graphite‐like structure is a prevailing problem that is known to compromise the performance of individual graphene sheets in an assembled bulk form. To address this common problem efficiently and monitor the structure and quality of graphene products comprehensively, it is highly desirable to develop reliable metrology techniques for characterising graphene‐based materials on a bulk assembly level and in a quantitative manner. Here, by revisiting the physicochemical principle of electrosorption, we propose a simple electrochemical approach, namely dynamic electrosorption analysis (DEA), as an easily accessible and effective technique for evaluation of the self‐stacking behaviour of graphene. Taking multilayered chemically converted graphene films as a model, we demonstrate that the DEA technique can effectively reveal very subtle variation in accessible surface area and pore size of graphene assemblies in the liquid phase and thus can provide useful insights to the experimental design relating to restacking control. This work also reveals the huge effect some routine processing conditions, such as heat treatment and drying, can have on the structure and performance of graphene‐based bulk materials, providing useful guidance for future manufacturing of this class of materials.