聚氯乙烯结构缺陷和热不稳定性之间关系的研究 2.各种结构缺陷含量和热脱氯化氢速率之间的关系

本工作采用溴加成法、酚解法、FTIR法及臭氧裂解法分别测定了五种不饱和蒸气压下聚合的PVC样品(u-PVC)和五种商品PVC样品(s-PVC)的总双键、总不稳定氯、孤立双键和内部双键的含量.通过研究结构缺陷和PVC的平均分子量及脱HCl速率的相互关系,揭示了不饱和总双键值,总不稳定氯和孤立双键含量彼此的相关性是建立在它们分别与1/M_n的相关性基础之上,从而得出了这三种定量值测得的主要都是端基烯丙基氯结构.根据三者对脱HCl速率的良好线性相关性,首次提出了端基烯丙基氯结构在HCl催化作用下异构化成内部烯丙基氯从而成为脱HCl速率主要原因的机理.     

高效液相色谱-电感耦合等离子体质谱法同时测定化妆品中5种含溴防腐剂

建立了同时测定化妆品中苯扎溴铵、2-溴-2-硝基-1,3-丙二醇、5-溴-5-硝基-1,3-二■烷、甲基二溴戊二腈、溴氯芬5种含溴防腐剂的高效液相色谱-电感耦合等离子体质谱法(HPLC-ICP-MS)。样品经含0.1%甲酸的甲醇溶液超声提取后,采用Agilent Eclipse-C_(18)(150 mm×4.6 mm,5μm)色谱柱分离,以0.1%甲酸-甲醇为流动相进行梯度洗脱,ICP-MS测定组分中的~(79)Br,以保留时间定性,外标法定量。5种含溴防腐剂均在0.5～100 mg/L范围内线性关系良好(r0.999),检出限为1.5～3.0μg/g,不同基质化妆品中的回收率为91.2%～108%,相对标准偏差(n=6)为1.3%～4.2%。该方法快速、准确、灵敏、专属性强,适用于化妆品中5种含溴防腐剂的定性定量分析。     

生物检材中乌头类生物碱的检验

 用薄层 (TLC)、高效液相 光电二极管阵列检测器 (HPLC/DAD)、动物实验等方法对生物检材中乌头生物碱进行检验 ,并对这些方法进行比较。结果发现 ,TLC法为此类药物检验筛选的首选方法 ,最小检出量为 0 3μg。在进行HPLC检测时 ,以乌头生物碱的特征紫外吸收光谱和动物实验结果为重要的定性手段 ,其特征吸收波长为 (2 2 8± 2 )nm和 (2 75± 2 )nm。乌头生物碱在 2mg/L～ 5 0mg/L时其峰面积与质量浓度有很好的线性 ,相关系数为 0 9996。经实际案件证明 ,方法准确、灵敏 ,可用于生物检材中乌头类生物碱的检验。     

稀土改性L沸石在烃类催化裂化催化剂中的应用

采用离子交换的方法制备了一系列复合稀土（含La及Ce）质量分数不同的稀土改性超稳L沸石（RE-USL），以RE USL沸石替代质量分数为5%的REUSY作为催化裂化催化剂的活性组分,用标准轻油微反活性试验（MAT）评价了其催化性能,并同单一稀土元素改性USL沸石进行了对比。结果表明,一定量的复合稀土改性USL沸石的催化性能优于单一稀土（La或Ce）改性的USL沸石，在催化裂化催化剂中加入稀土改性USL沸石,可以降低汽油产品的烯烃质量分数；可以提高汽油的辛烷值。当复合稀土在RE USL沸石中的质量分数为0.4%左右时， 与不加稀土改性USL沸石催化剂相比较，催化剂的活性指数MAT提高3.6个单位，烯烃质量分数降低1.57个单位，研究法辛烷值（RON）提高2.08个单位，产品分布更合理。     

BARRIER PROPERTIES OF VINYLIDENE CHLORIDE/METHYL ACRYLATE COPOLYMER

A series of vinylidene dichloride (VDC) copolymers with methyl acrylate (MA) ascomonomer (3--12wt%), was prepared by free-radical suspension copolymerization. Thepermeability coefficients of the copolymers to oxygen and carbon dioxide were measured at1.0 MPa and at 30℃, and those to water vapor were measured at 30℃ and 100% relativehumidity All the VDC/MA copolymers studied are semicrystalline. As the MA contentincreases, the permeability coefficients of the copolymers to oxygen, carbon dioxide, andwater vapor are progressively increased, caused by decrease in crystalline fraction andincrease in free volume of VDC/MA copolymers.     

Theoretical Study of the C_(60)O_3 Isomers

WiththepreparationandisolationofC,,O.'moreandmoreattentionwaspaidtotheirstructuresandpropertiest').WooddetectedC,,O.firstwhentheypreparedC,,byvaporizinggraphite").Fromthenon,thelaboratoriesallovertheworldhavepreparedC6,O.byvariousmethodssuchasPhotoxidationt2-4),Electrochemicaloxi-dation[si,Ozonizationt7.83andChemicaladditiont6'12-14iandsoon.Accordingtothefollow-uptheoreticalstudiesforC,,O.,itisindicatedthattherearetwoisomersofC,,O:eithertheoxygenatomislocatedoverthe6/6bondtogeneratethe6/…     

4-乙烯吡啶-丁烯酮共聚物与铑的顺二羰基配合物结构和性能研究

<正> 在铑催化剂的作用下,甲醇与一氧化碳经羰基化反应为乙酸和乙酸甲酯,是60年代发展起来的新工艺,但以往多是采用均相小分子铑催化剂,除我们的工作以外,迄今尚少见报道有采用以共聚物为配体的高分子铑催化剂的成功先例。     

Classification of Cm I energy levels using PCA-BPN and PCA-NLM

Two pattern recognition (PR) techniques, principal component analysis-back propagation networks (PCA-BPN) and principal component analysis-nonlinear mapping (PCA-NLM), have been applied to the problem of classifying unknown energy levels of the first spectrum of curium (Cm I) according to their configurations. In comparison, with those reported by early PR techniques and counter propagation neural networks (CPN's), PCA-BPN has been demonstrated to possess much more prediction accuracy as to its performance on test sets. Obtained results further confirm the most previous assignments with these energy levels given by some early PR techniques and CPN. Moreover, the obtained results definitely reassign some energy levels' electronic configurations which were ambiguously conjectured in previous work.