Synthesis and Characterization of Two Binuclear Macrocyclic Zinc(Ⅱ) Complexes by Anion Exchange

Two macrocyclic zinc(II) complexes {[ZnL(VO3)2]·0.33H2O}n(1) and [ZnL(H2O)2][Ni(CN)4](2)(L = 5,5,7,12,12,14-hexamethyl-1,4,8,11-tetraazacyclotetradecane) have been obtained from the reactions of [ZnL](ClO4)2 with NH4VO3 and K2[Ni(CN)4], respectively, and structurally characterized by elemental analysis, IR, XRPD, TG and X-ray diffraction. Single-crystal X-ray diffraction analyses indicated that the Zn(II) atom lies on an inversion center and is octahedrally coordinated by four nitrogen atoms of the tetradentate macrocyclic ligand in the equatorial plane and two oxygen atoms of [VO4] tetrahedra in the axial positions in 1, and two oxygen atoms of two water molecules in 2. Complex 1 shows a three-dimensional structure, which is constructed by the links of [VO3]nn- chains with [ZnL]2+, forming one-dimensional channels occupied by guest water molecules. The monomers of [ZnL(H2O)2]2+ and [Ni(CN)4]2- are connected through the intermolecular hydrogen bonds to form a two-dimensional sheet in complex 2.     

Synthesis,Crystal Structure and Luminescent Property of Cadmium Complex Based on 2-（2-（1Hbenzo[d]imidazol-2-yl）benzyl）-1H-benzo[d]-imidazole

The complex [Cd(bbb)Cl2]·DMF·H2O, where bbb is 2-(2-(1H-benzo[d]imidazol-2-yl)benzyl)-1H-benzo[d]imidazole, was synthesized and characterized by X-ray single-crystal structure analyses. For the complex: C24H25Cl2CdN5O2, Mr = 598.77, crystal system, triclinic, space group P1, a = 9.9878(12), b = 10.0008(12), c = 13.2217(15) , α = 80.674(2), β = 72.158(2), γ = 86.776(2)°, V = 1240.5(3) 3, Z = 2, Dc = 1.598 g/cm3, λ = 0.71073, μ(MoKα) = 1.127 mm–1, F(000) = 600, S = 1.04, R = 0.0905 and wR = 0.3088 for 4805 observed reflections with I 2σ(I). It is a neutral complex. The distorted tetrahedral geometry of cadmium ion is coordinated by two nitrogen atoms of ligand and two chloride ions. The complex emits blue green luminescence with emission peaks at 480 nm in DMF solution.     

基于丙二酰胺的不对称双子表面活性剂的合成及其乳化性能

将二(3-二甲氨基丙基)丙二酰胺分别与溴代十六烷和溴代十四烷反应,生成的季铵盐化产物经丙酮-乙腈重结晶,得到含丙二酰胺基的不对称阳离子双子(Gemini)表面活性剂(命名为16-9-14),总收率为45.9%(以溴代十六烷计);利用红外光谱和核磁共振谱表征了合成产物的结构,采用电导法测定了其临界胶束浓度(CMC),采用滴体积法测定了其临界张力(γCMC),进而初步探讨了其发泡沫性能和乳化性能.结果表明,合成的Gemini表面活性剂的CMC为1.57×10-4 mol/L,γCMC为38.45mN/m;其发泡性能和乳化性能优于相应的单子表面活性剂.     

基于正电荷和光热协同效应的新型半导体聚合物纳米抗菌材料

由于抗生素的不当使用和细菌多药耐药的出现, 迫切需要开发新的抗菌剂. 本文制备了具有光热转换性能的正电荷半导体高分子材料及具有协同抗菌活性的半导体聚合物纳米粒子(SP-PPh₃ NPs). SP-PPh₃ NPs的光热转化效率为43.8%. 带正电荷的SP-PPh₃ NPs可以附着在细菌上, 有助于将热量有效传递给细菌. 在热和正电荷的协同作用下, SP-PPh₃ NPs对革兰氏阴性大肠杆菌(E. coli)和革兰氏阳性金黄色葡萄球菌(S. aureus)均具有抗菌活性, 其对二者的体外抑菌率分别为99.9%和98.6%. 此外, SP-PPh₃ NPs具有良好的生物相容性, 对小鼠的主要器官几乎无副作用. 对细菌感染的小鼠皮肤伤口用SP-PPh₃ NPs治疗12 d后, 伤口可以很好地愈合.     

聚氯乙烯表皮成分对加成型硅橡胶固化的影响

采用流变学方法研究了双组分加成型硅橡胶在不同聚氯乙烯(PVC)表皮上的固化动力学,并利用红外光谱、核磁共振波谱、电感耦合等离子体质谱仪等手段分析了PVC表皮成分,以确定导致双组分加成型硅橡胶不固化的具体原因。 结果表明,PVC表皮中导致硅橡胶不固化的主要元素为P元素。 在固定硅橡胶厚度为1 mm的情况下,当PVC表皮中的P元素质量分数低于3×10^-3%时,浇注在其上的双组分加成型硅橡胶依然能固化;而当PVC表皮中的P元素质量分数超过约2.4×10^-2%时,虽然浇注在其上的双组分加成型硅橡胶的中间层依然能固化,但与PVC表皮接触部分的硅橡胶不固化,且不固化层厚度随P元素质量分数增加而增加。 本文还研究了在P元素质量分数低于3×10^-3%的PVC表皮上,降低硅橡胶厚度至微米级时的固化行为,在P元素质量分数低于3×10^-3%的PVC表皮上,当硅橡胶厚度低于2 μm时,硅橡胶出现不完全固化现象。 双组分加成型硅橡胶在含有P元素的PVC表皮表面的固化行为主要是由硅橡胶样品中铂催化剂总含量及PVC表皮中的P元素含量确定的,同时也会受到双组分加成型硅橡胶反应速率以及铂催化剂、P元素在硅橡胶中的扩散速率的影响。     

不同色浆质量分数的水性聚氨酯涂料对聚氯乙烯表皮低温爆破性能的影响

本文制备了一系列不同色浆质量分数的水性聚氨酯涂料,并将其喷涂在汽车仪表板聚氯乙烯(PVC)表皮的背面形成复合材料。 用旋转流变仪表征了涂料的粘度以评价其喷涂性能;用差示扫描量热仪表征了材料的玻璃化转变温度(T_g);利用万能材料试验机表征了材料在-30 ℃条件下的拉伸性能及抗撕裂性能;用动态热机械分析仪表征了材料的损耗比随温度的变化。 结果表明:不同色浆质量分数的涂料都能喷涂,含有涂层材料PVC表皮在-30 ℃低温爆破性能与涂层材料的T_g、低温拉伸性能、抗撕裂性能的关系并不大,而与涂层材料的阻尼性能直接相关。 材料的阻尼性能越好,其低温爆破性能越好。     

空心球状C@SnO2@SnS2的制备及光催化去除Cr（Ⅵ）性能研究

将SnO2负载在碳球上通过不完全烧结的方法得到含有大量碳的空心状C@SnO2,随后加入TAA(硫代乙酰胺),利用离子交换法在水热过程中制备了具有不同硫化程度的空心结构的C@SnO2@SnS2三元复合物。利用XRD、FESEM、TEM、XPS、UV-Vis DRS、PL等测试手段对合成样品进行表征,并测试了其光催化去除Cr(VI)的性能。结果表明,C、SnO2和SnS2三者之间的协同作用以及空心结构的形貌显著增强了SnO2的光催化性能,其中CSS-2样品对Cr(VI)具有最佳的去除能力,太阳光照射120 min后对Cr(VI)的去除率高达98.8%。     

Supramolecular Assemblies of Three New Metronidazole Derivatives Constructed with Various Dihydroxy-benzoic Acids via Hydrogen Bonds

Metronidazole(MTZ) is an important antibiotic, which has been widely applied to cure protozoal and bacterial diseases for human beings or animals. Herein, three novel drug supramolecular crystals constructed by MTZ with 2,5-dihydroxy-benzoic acid(2,5-DHBA)(1), 2,6-dihydroxy-benzoic acid(2,6-DHBA)(2) and 3,5-dihydroxy-benzoic acid(3,5-DHBA)(3), respectively, have been discovered. The hydrogen bonds of N-H···O(O-H···N), C-H···O and O-H···O play important roles in the 3D supramolecular framework formation for crystals 1-3. Interestingly, due to the vary locations of the substituent groups, the two-dimensional layers in crystals 1 or 2 are constructed via intermolecular hydrogen bonds between MTZ and 2,5-DHBA or 2,6-DHBA, while in crystal 3 water molecules play a significant role except the intermolecular hydrogen bonds between MTZ and 3,5-DHBA. In addition, five synthons of I R₂²(8), II R₃³(9) in crystal 1, III R₁²(4), IV R₂²(8) in crystal 2 and V R₂²(7) in crystal 3 formed through various hydrogen bonds are founded in this work. Systematic studies of syntheses, crystal structures and thermal analysis are reported.     

Recent Advances in Atomic-scale Storage Mechanism Studies of Two-dimensional Nanomaterials for Rechargeable Batteries Beyond Li-ion

Developing new types of rechargeable batteries with high energy densities and low cost have received increasing attentions, aiming to reduce the dependence on high-priced lithium. Beyond Li-ion batteries, the potential alternatives including Na-ion batteries, Li-S batteries and Li-air batteries have been investigated recently, which are required to be viable for commercial applications. From this point of view, to understand the electrochemical reaction mechanisms and kinetics of these batteries has become the key challenge to make breakthroughs in the field of new energy storage. In this review, we present a critical overview of the two dimensional nanomaterials-based batteries (except Li-ion-based batteries) that could meet such demonds. To develop new energy storage devices with more promising performances, the microstructure evolution and atomic scale storage mechanism of these batteries are comprehensively summarized. In addition, the major challenges and opportunities of advanced characterization techniques are finally discussed. We do hope that this review will give the readers a clear and profound understanding of the electrochemical reaction mechanisms and kinetics of the as-discussed batteries, thus effectively contributing to the smart design of future-generation energy storage devices.     

Aerobic Oxidation of Alcohols to Aldehydes and Ketones with Recyclable Pd Catalysts on Cross-linked 1,10-Phenanthroline Polymers

A 1,10-phenanthroline based polymer named PPPhen(i.e., polymer from pyrene 1,10-phenanthrolin) was prepared by the Friedel-Crafts reaction of 1,10-phenanthroline and pyrene cross-linked with dimethoxymethane. The related Pd catalyst Pd@PPPhen was prepared by supporting Pd nanoparticles(NPs) on the PPPhen material. PPPhen and Pd@PPPhen were characterized by means of scanning electron microscopy(SEM), transmission electron microscopy, N₂ adsorption-desorption, Fourier-transform infrared and X-ray photoelectron spectroscopy analyses. The results showed that PPPhen polymer was highly porous and that the phenanthroline group can enhance the stability of the Pd nanoparticles. Pd@PPPhen also exhibited good catalytic activity in the aerobic oxidation of alcohols to aldehydes and ketones, and Pd@PPPhen was recyclable with durable activity and retentive structures.