Orders of Zeros of Polynomials on Trajectories of Solutions of a System of Linear Differential Equations with Regular Singular Points

Mathematical Notes -     

Domain size equilibration in sphere‐forming block copolymers

The kinetics of domain size equilibration were studied for asymmetric poly(ethylene‐alt‐propylene)‐b‐poly(dimethyl siloxane) (EPDMS) and polyisoprene‐b‐poly(dimethyl siloxane) (IDMS) block copolymers in the body‐centered cubic ordered phase. Small‐angle X‐ray scattering measurements of the principal peak position (q*) were made as a function of time after temperature jumps within the ordered state. The equilibration times were remarkably long, especially on cooling and for temperatures below 100 °C. For example, after a quench to 40 °C, q* for EPDMS had not fully equilibrated even after several weeks of annealing; IDMS required several days to equilibrate at the same temperature. In contrast, a lamella‐forming EPDMS sample was able to adjust q* within the timescale of the measurements (i.e., minutes) with both heating and cooling over the same temperature range. Measurements of tracer diffusion indicated that chain mobility was not the rate‐limiting step, although differences in mobility did account for the differences between EPDMS and IDMS. Rather, the limiting step was the required reduction in the number density of spheres on cooling; the disappearance of spheres, either by evaporation or by fusion, provided a large kinetic barrier. Lamellae, however, could adjust domain dimensions simply by local displacements of individual chains. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 715–724, 2003     

On the evaluation of the nonisothermal kinetic parameters of (GeS2)0.3(Sb2S3)0.7 crystallization using the IKP method

The isoconversional method suggested by Friedman and the invariant kinetic parameters method (IKP) were used in order to examine the kinetics of the nonisothermal crystallization of (GeS₂)_0.3(Sb₂S₃)_0.7. The objective of the paper is to show the usefulness of the IKP method both for determining the activation parameters as well as the model of the investigated process. It was shown that the kinetic triplet [(E, A, f(α), where E is the activation energy, A is the preexponential factor, and f(α) is the differential function of conversion], which results through the application of the IKP method, depends on the set of kinetic models considered. For different sets of kinetic models, proportional values of f(α) are obtained. A criterion for the selection of this set, the use of which lead to the true kinetic triplet corresponding to the analyzed process (E = 163.2 kJ mol^?1; A = 2.47 × 10¹² min^?1 and the Avrami‐Erofeev model, A_m, for m = 2.5–2.6 was suggested. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 36: 309–315, 2004     

Complex morphology of melt-spun nylon-6 fibres investigated by 1H double-quantum-filtered NMR spin-diffusion experiments.

The complex morphology of high-speed melt-spun nylon-6 fibres hydrated with D2O was investigated using 1H double-quantum-filtered spin-diffusion NMR experiments. The magnetisation exchange from selected crystalline domains along the fibrils and interfibrils was simulated with the help of a three-dimensional solution of a spin-diffusion equation approximated by a product of one-dimensional analytical NMR signals, which correspond to a lamellar morphology. This allows to measure the sizes of crystalline and less-mobile amorphous domains along the fibrils, as well as the diameter of the fibrils and interfibril distances. A series of nylon-6 fibres with extreme values of winding speed and draw ratio was investigated. The changes detected in the domain size along the fibrils and interfibrils show the same trend in the data obtained from wide-angle X-ray diffraction and small-angle X-ray scattering.     

Diffusion in flows with a linearly nonuniform velocity profile

Methods of group analysis are applied to determine the Green’s function in the infinite space of the test particle diffusion equation for flows with a linearly nonuniform velocity profile. Using this function, the solutions of the Cauchy problem are obtained for certain particular initial conditions.     

Effect of nanotube functionalization on the properties of single‐walled carbon nanotube/polyurethane composites

A commercially available aliphatic thermoplastic polyurethane formulated with a methylene bis(cyclohexyl) diisocyanate hard segment and a poly(tetramethylene oxide) soft segment and chain‐extended with 1,4‐butanediol was dissolved in dimethylformamide and mixed with dispersed single‐walled carbon nanotubes. The properties of composites made with unfunctionalized nanotubes were compared with the properties of composites made with nanotubes functionalized to contain hydroxyl groups. Functionalization almost eliminated the conductivity of the tubes according to the conductivity of the composites above the percolation threshold. In most cases, functionalized and unfunctionalized tubes yielded composites with statistically identical mechanical properties. However, composites made with functionalized tubes did have a slightly higher modulus in the rubbery plateau region at higher nanotube fractions. Small‐angle X‐ray scattering patterns indicated that the dispersion reached a plateau in the unfunctionalized composites that was consistent with the plateau in the rubbery plateau region. The room‐temperature modulus and tensile strength increase was proportionally higher than almost all increases seen previously in thermoplastic polyurethanes; however, the increase was still an order of magnitude below what has been reported for the best nanotube–polymer systems. Nanotube addition increased the hard‐segment glass transition temperature slightly, whereas the soft‐segment glass transition was so diffuse that no conclusions could be drawn. Unfunctionalized tubes suppressed the crystallization of the hard segment; whereas functionalized tubes had no effect. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 490–501, 2007     

N. Charton,A. Feldermann,A. Theis,M. H. Stenzel,T. P. Davis,C. Barner‐Kowollik,Initiator efficiency of 2,2′‐azobis(isobutyronitrile) in bulk dodecyl acrylate free‐radical polymerizations over a wide conversion and molecular weight range (2004) 42(20) 5170–5179

The original article to which this Erratum refers was published in J Polym Sci Part A: Polym Chem (2004) 42(20) 5170–5179. No abstract.     

Motion Control by ZV Shaper Synthesis Extended for Fractional Systems and Its Application to CRONE Control

Shaping command input or preshaping is used for reducing system oscillation in motion control. Desired systems inputs are altered so that the system finishes the requested move without residual oscillation. This technique, developed by N.C. Singer and W.P. Seering, is used for example in the aerospace field, in particular in flexible structure control. This paper presents the study of ZV shaper for explicit fractional derivative systems (generalized derivative systems). A robustness study of ZV shaper is then presented and applied to improve second generation CRONE control response time. Results from simulation and from a DC motor bench are also given.     

Oblique-basis shell-model calculations

A one-dimensional harmonic oscillator in a box is used to introduce the oblique-basis concept. The method is extended to the nuclear shell model by combining traditional spherical shell model states, which yield a diagonal representation of the usual single-particle interaction, with SU(3) shell model collective configurations that track deformation. An application to ²⁴Mg, using the realistic two-body interaction of Wildenthal, is used to explore the validity of this mixed-mode shell-model scheme. The theory is also applied to lower pf-shell nuclei, ^44–48Ti and ⁴⁸Cr, using the Kuo-Brown-3 interaction. These nuclei show strong SU(3) symmetry breaking due mainly to the single-particle spin-orbit splitting. Nevertheless, the results also show that yrast band B(E2) values are insensitive to fragmentation of SU(3) symmetry. Specifically, the quadrupole collectivity as measured by B(E2) strengths remains high even though the SU(3) symmetry is rather badly broken. The results suggest that an oblique-basis mixed-mode shell-model theory may be useful in situations where competing degrees of freedom dominate the dynamics.     

Special points for calculating integrals over the primitive cell of a periodic system

A method is proposed for constructing appropriate sets of special points in the Brillouin zone in which the extended unit cell method is used with a subsequent shift from the center of the reduced Brillouin zone. The proposed method offers several advantages over the commonly used Monkhorst-Pack method. The difference in the construction of sets of special points for the direct and reciprocal lattices is discussed for crystals belonging to a nonsymmorphic space group. The cases of a planar square lattice and an fcc lattice are considered to illustrate general results.