Einstein relation in chemically doped organic semiconductors

Based on the assumption of Gaussian energy distributions of the lowest unoccupied molecular orbital (LUMO) and the highest occupied molecular orbital (HOMO), analytical expressions of generalized Einstein relation in chemically doped organic semiconductor are developed, by approximation of Coulomb traps with a rectangle potential well. Numerical calculations show that traditional Einstein relations do not hold for chemically doped organic semiconductors. Similar to physical doping, the dependence of diffusion coefficient to mobility D/μ ratio on the carrier concentration has a maximum. An essential difference between chemical doping and physical doping is that, the D/μ ratio in chemically doped organic semiconductors depends not only on carrier concentration and doping concentration, but also on the applied electric field. PACS 71.20.Rv; 72.90.+y; 73.50.-h     

Non-aggregated Pd nanoparticles deposited onto catalytic supports

Nanostructured powders have shown great promise for a variety of applications including chemical gas sensors, high surface area supports for catalysis, tribology, chemical mechanical polishing, and optoelectronics. In this report, highly dispersed Pd nanoparticles with a narrow size distribution, and mean diameter of 2±0.2 nm, were deposited at room temperature onto amorphous carbon and oxide supports (TiO₂, Al₂O₃) by pulsed-laser ablation of a Pd sputtering target. Depositions were performed in Ar at a back-fill pressure of 3 mTorr after reaching a base pressure of 10^-7 Torr. Populations of uniformly dispersed particles with an interparticle spacing of 3 to 10 nm were observed by high-resolution transmission electron microscopy with little evidence of nanoparticle aggregation. The chemical compositions of individual nanoparticles were confirmed by high spatial resolution energy-dispersive X-ray spectroscopy.     

Directed and elliptic flow in 197Au+197Au at intermediate energies

Directed and elliptic flow for the ¹⁹⁷Au+¹⁹⁷Au system at incident energies between 40 and 150 MeV per nucleon has been measured using the INDRA 4π multi-detector. For semi-central collisions, the excitation function of elliptic flow shows a transition from in-plane to out-of-plane emission at around 100 MeV per nucleon. The directed flow changes sign at a bombarding energy between 50 and 60 MeV per nucleon and remains negative at lower energies. Molecular dynamics calculations (CHIMERA) indicate sensitivity of the global squeeze-out transition on the σ _NN and demonstrate the importance of angular momentum conservation in transport codes at low energies.     

The role of alkali content in the devitrification mechanisms of SiO2–Fe2O3–Na2O–PbO SYSTEM

Three batch compositions of pure oxides (SiO₂, Fe₂O₃, PbO, Na₂O) with equivalent SiO₂, Fe₂O₃ and PbO contents and a gradually increased Na₂O content were vitrified through heating in a high temperature electric furnace and subsequent quenching. The resulting vitreous products were thermally treated in order to study the devitrification behaviour, under conditions designated from differential thermal analysis experiments. Depending on the Na₂O content, crystal phase separation gave rise to the growth of acmite and hematite or maghemite. A uniformly phase separated glass-ceramic material, with crystallites of similar size and population density, was produced from devitrification of the vitreous product with the higher Na₂O content.     

Influence of Cd and Cr substitutions on the magnetization and permeability of magnesium ferrites

Magnetization and permeability of polycrystalline ferrites with general formula Cd_xMg_1−xFe_2−yCr_yO₄ (x=0, 0.2, 0.4, 0.6, 0.8, 1.0; y=0, 0.05 and 0.10) were studied. Study of saturation magnetization reveals that the Neel's two-sublattice model exists upto x=0.4, for y=0, 0.05 and 0.1 and a three-sublattice model (YK-model) is predominant for x>0.4 and y=0, 0.05 and 0.10. The saturation magnetization and magnetic moment were found to decrease with the increase in Cr³⁺ contents, which is attributed to the dilution of B–B site interaction. Variation of initial permeability with temperature revealed the long-range ferromagnetic ordering in the compounds with x=0.4. The sample with x?0.4 and y=0, 0.05 and 0.10 showed peaking behavior near Curie temperature, which is attributed to the decrease of anisotropy constant K₁ to zero. Low-frequency dispersion of initial permeability suggests domain wall displacement. Addition of Cd²⁺ resulted in a sharp decrease in Curie temperature. With the addition of Cr³⁺, initial permeability was found to decrease.     

Some results on quasipolyhedral convexity

The objective of this paper is to analyze under what well-known operations the class of quasipolyhedral convex functions, which can be regarded as an extension of that of polyhedral convex functions, is closed. The operations that will be considered are those that preserve polyhedral convexity, such that the image and the inverse image under linear transformations, right scalar multiplication (including the case where λ=0⁺) and pointwise addition.      

The study of cluster phenomenon at accelerator energies

Correlation between the particles from the proton-nucleus interactions in emulsion at 70 GeV/c is presented through the study of the rapidity gap analysis and compared with the two-particle rapidity correlations. It is observed that the strength of correlation decreases as the size of cluster increases. Asymmetry between the forward and backward components were also studied.Authors are thankful to Prof. K. D. Tolstov, JINR, Dubna, USSR for sending the exposed emulsion plates. Thanks are also due to UGC for financial assistance. We sincerely acknowledge the encouragement from Prof. T. Roy.     

Preparation and electrical characterization of (PVC + KBrO3) polymer electrolytes for solid state battery applications

This paper presents results of studies on dc electrical conductivity and transference number measurements on potassium bromate (KBrO₃) complexed polyvinyl chloride (PVC) films prepared by solution cast technique. Temperature dependence of dc electrical conductivity and transference number data indicated the dominance of ion type charge transport in these specimens. The magnitude of conductivity increased with increase in concentration of the salt and temperature. Using this (PVC + KBrO₃) electrolyte, solid-state electrochemical cells were fabricated, and their discharge profiles were studied under a constant load of 100 kΩ. Several cell profiles such as open circuit voltage, short circuit current, power density, and energy density associated with these cells were evaluated and were reported. The features of complexation of the electrolytes were studied by X-ray diffraction and Fourier transform infrared spectroscopy. Paper presented at the Third International Conference on Ionic Devices (ICID 2006), Chennai, Tamilnadu, India, Dec. 7–9, 2006     

Effect of the electric field on “incommensurate-commensurate” magnetic phase transitions in BiFeO3-type multiferroics

The specific features of the “incommensurate-commensurate” phase transitions induced by a magnetic field in multiferroics (materials with coexisting magnetic and electric ordering) are considered. These materials are ferroelectromagnets, for example, bismuth ferrite BiFeO₃ and BiFeO₃-based compounds, which have spatially modulated spin structures. It is shown that the interaction between the electric and magnetic subsystems of the multiferroic material can lead to an electric-field-induced shift of the critical magnetic field corresponding to the transition from a spatially modulated state to a homogeneous antiferromagnetic state. According to the theoretical estimates obtained for material parameters characteristic of the bismuth ferrite, this shift is of the order of 0.5 T in an electric field of 50 kV/cm. The phase diagrams are constructed in the “electric field-magnetic field” coordinates. The results of calculations performed in the harmonic incommensurate structure approximation are compared with the exact soliton solution.     

Effect of electrochemically synthesized polymethylolamide coatings on the corrosion resistance of steel in seawater

The effect of coatings based on a copolymer of acrylamide, N,N′-methylenebisaxcrylamide and formaldehyde deposited by electrochemical polymerization on the corrosion resistance of 08Kh18N10T stainless steel (field studies at sea) and low-carbon steel (laboratory experiments) was examined.