Frequency fine-tuning in Class IV flextensional transducers

Class IV flextensional transducers (FTs) are the best-known FTs in literature. These are light-weight projectors (compared to the conventional Tonpilz designs) with capability for high power delivery at low frequencies. The resonance frequencies of this type of transducers are known to be dominantly dependent on the characteristics of the outer shell than on the driver stack. Consequently, the method of achieving fine-tuning of the transducer by modifying the characteristics of the stack, as practiced in the case of Tonpilz designs, is not very effective. This paper describes a method for fine-tuning of the frequency of a Class IV FT, which involves only a modification of a pair of small components used for coupling the stack to the transducer. The effectiveness of the method is examined by finite element modelling using the package ATILA, in the case of a 3 kHz aluminium shell transducer. Experimental results are also presented.     

Vibronic and electric properties of semiconductor structures based on butyl-substituted mono-and triphthalocyanine containing erbium ions

The Raman spectra have been obtained and the temperature dependence of the conductivity of organic semiconductor structures based on butyl-substituted erbium monophthalocyanine and erbium triphthalocyanine has been studied. It has been found experimentally that the activation energy decreases dramatically and the Raman spectra exhibits four new peaks in the region of large Raman shifts as the molecular structure of the samples becomes more complicated.     

Orientation and relaxation of polymer–clay solutions studied by rheology and small-angle neutron scattering

The influence of shear on viscoelastic solutions of poly(ethylene oxide) (PEO) and clay [montmorillonite, i.e., Cloisite NA+ (CNA)] was investigated with rheology and small-angle neutron scattering (SANS). The steady-state viscosity and SANS were used to measure the shear-induced orientation and relaxation of the polymer and clay platelets. Anisotropic scattering patterns developed at much lower shear rates than in pure clay solutions. The scattering anisotropy saturated at low shear rates, and the CNA clay platelets aligned with the flow, with the surface normal parallel to the gradient direction. The cessation of shear led to partial and slow randomization of the CNA platelets, whereas extremely fast relaxation was observed for laponite (LRD) platelets. These PEO–CNA networklike solutions were compared with previously reported PEO–LRD networks, and the differences and similarities, with respect to the shear orientation, relaxation, and polymer–clay interactions, were examined. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3102–3112, 2004     

Thermal characterisation of micro-hotplates used in sensor structures

Micro-hotplates operated at elevated temperature form the basic element in several sensor devices, such as integrated calorimetric or Taguchi-type gas sensors and flow-rate sensors. In all of these applications thermal properties of the sensing elements play a determining role in functional operation, therefore, their accurate characterisation is essential. The micro-hotplates investigated were developed by one side porous silicon micro-machining technology, forming Pt micro-filaments embedded in non-stoichiometric silicon nitride, and suspended across a cavity. This work is dealing with the accurate temperature detection in the micro-scale by different measurement methods for the deduction of steady state and transient thermal properties from the results. Transient properties of the structure were investigated by application of a simplified thermal equivalent circuit model.     

Recording and reading of intense optical pulses based on the induced transparency

The effect of spatial localization of the atomic (Raman) coherence in the forbidden transition of a three-level atom is studied for two intense optical pulses with comparable Rabi frequencies. We propose to use this effect for coherent recording of intense optical pulses. Various schemes of reading of the recorded pulse are considered.     

Laser lineshape effects on cavity-enhanced absorption spectroscopy signals

The quantitative effects of laser lineshape on signals from cavity-enhanced absorption spectroscopy (CEAS) and integrated cavity output spectroscopy (ICOS) experiments are examined. The governing equations for CEAS signals including the laser lineshape are derived. Approximations under which the laser lineshape may be neglected or replaced with an effective lineshape are presented. It is shown that the laser lineshape effects may be parameterized with two dimensionless variables: the laser linewidth normalized by the absorption linewidth, and the peak sample absorbance normalized by the mirror loss. In terms of the dimensionless variables, we simulate CEAS and ICOS signals and the absorbances inferred from them. The simulation results provide a useful tool for CEAS and ICOS practitioners to gauge the importance of laser lineshape effects in specific experiments. Simulations are performed for the four combinations of Gaussian and Lorentzian lineshapes for the laser and the absorption. PACS 42.62.Fi; 78.40.-q; 32.70.Jz     

Three-dimensional structure of the calcite-water interface by surface X-ray scattering

The three-dimensional structure of the calcite (104)-water interface has been determined with surface X-ray scattering. Nine crystal truncation rods (including specular and non-specular rods) were measured providing both vertical and lateral sensitivity to the interfacial structure. The results reveal that calcite is nearly ideally terminated with a single surface hydration layer that includes two inequivalent water molecules having distinct heights of 2.3 ± 0.1 and 3.5 ± 0.2 Å, each with a well-defined lateral registry with respect to the calcite surface. No additional layering of water is observed beyond this surface hydration layer. Small displacements in the outer two calcium carbonate layers were also observed. These results are compared with previous experimental and computational results.     

Characterisation of adsorbed layers on sulphide minerals by photoelectron spectroscopy

The systems galena/2-mercaptobenzothiazole (MBT) and pyrite/MBT have been studied using synchrotron radiation excited photoelectron spectroscopy (SRXPS). The chemisorption of MBT and the multilayer formation of 2,2′-dithiobis(benzothiazole) (BBTD) are evidenced by additional structures, observed beside the substrate signals, in the S2p-spectra of cleaved mineral surfaces after adsorption of MBT. The amount of the complex remains constant at concentrations as high as 10^–5 mol/L whereas the amount of BBTD increases. From the dependence of the adsorbate intensities on the excitation energy the conclusion can be drawn that an overlayer of BBTD on a chemisorbed layer of MBT is formed. The very weak adsorption of MBT on pyrite in alkaline solutions may explain the selective flotation of galena from pyrite in alkaline media.     

Laser ablation from Lithium niobate

Received: 21 May 1997/Accepted: 4 July 1997     

Numerical modeling of a XeCl laser excited by microwave discharge

12 , 169 (1987). Reasonably good agreements in the peak output power and laser efficiency have been achieved. Model calculations also predict that an efficiency as high as 2.7% can be obtained once the conditions of the above-mentioned experiments have been optimized. From the consideration that the skin depth effectively limits the absorption length of the microwave pumping and hence the excitable volume, it is concluded that high input power densities (>2 MW/cm³) and higher gas pressures (between 3 and 10 atm) are the preferable conditions to achieve higher efficiency. Preliminary calculations on CCl₄ containing XeCl gas mixtures show that improvement in laser efficiency by several folds may be achieved as a result of the higher intrinsic efficiency of excimer formation. Received: 23 September 1996 / Revised version: 25 March 1997