An interlaboratory comparison on whole water samples

The European Water Framework Directive 2000/60/EC requires monitoring of organic priority pollutants in so-called whole water samples, i.e. in aqueous non-filtered samples that contain natural colloidal and suspended particulate matter. Colloids and suspended particles in the liquid phase constitute a challenge for sample homogeneity and stability. Within the joint research project ENV08 “Traceable measurements for monitoring critical pollutants under the European Water Framework Directive 2000/60/EC”, whole water test materials were developed by spiking defined amounts of aqueous slurries of ultra-finely milled contaminated soil or sediment and aqueous solutions of humic acid into a natural mineral water matrix. This paper presents the results of an European-wide interlaboratory comparison (ILC) using this type of test materials. Target analytes were tributyltin, polybrominated diphenyl ethers and polycyclic aromatic hydrocarbons in the ng/L concentration range. Results of the ILC indicate that the produced materials are sufficiently homogeneous and stable to serve as samples for, e.g. proficiency testing or method validation. To our knowledge, this is the first time that ready-to-use water materials with a defined amount of suspended particulate and colloidal matter have been applied as test samples in an interlaboratory exercise. These samples meet the requirements of the European Water Framework Directive. Previous proficiency testing schemes mainly employed filtered water samples fortified with a spike of the target analyte in a water-miscible organic solvent.     

Tailoring of nanoscale porosity in carbide-derived carbons for hydrogen storage

The poor performance of hydrogen storage materials continues to hinder development of fuel cell-powered automobiles. Nanoscale carbons, in particular (activated carbon, exfoliated graphite, fullerenes, nanotubes, nanofibers, and nanohorns), have not fulfilled their initial promise. Here we show that carbon materials can be rationally designed for H2 storage. Carbide-derived carbons (CDC), a largely unknown class of porous carbons, are produced by high-temperature chlorination of carbides. Metals and metalloids are removed as chlorides, leaving behind a collapsed noncrystalline carbon with up to 80% open pore volume. The detailed nature of the porosity-average size and size distribution, shape, and total specific surface area (SSA)-can be tuned with high sensitivity by selection of precursor carbide (composition, lattice type) and chlorination temperature. The optimum temperature is bounded from below by thermodynamics and kinetics of chlorination reactions and from above by graphitization, which decreases SSA and introduces H2-sorbing surfaces with binding energies too low to be useful. Intuitively, pores of different size and shape should not contribute equally to hydrogen storage. By correlating pore properties with 77 K H2 isotherms from a wide variety of CDCs, we experimentally confirm that gravimetric hydrogen storage capacity normalized to total pore volume is optimized in materials with primarily micropores ( approximately 1 nm) rather than mesopores. Thus, in agreement with theoretical predictions, a narrow size distribution of small pores is desirable for storing hydrogen, while large pores merely degrade the volumetric storage capacity.     

Experiments and an Improved Method for Solving the Discrete Alternative Multiple-criteria Problem

A number of interactive methods that use convex cones for solving the discrete alternative multiplecriteria problem have appeared in the literature. Convex cones are used to identify inferior alternatives based on the previous responses of the decision-maker. The aim is to identify as many inferior alternatives as possible using the cones so that the decision-maker will be required to make as few pairwise comparisons as possible.In this study we make experiments to see the effects of a number of cone generators, the selection procedure of cone generators, and the order in which pairwise comparisons are made, on the total number of pairwise comparisons. We also develop an algorithm based on the results of the experiments. Our computational experience shows that the algorithm performs well compared with algorithms that require similar information input from the decision-maker.     

Analysis of a two-stage telecommunication supply chain with technology dependent demand

We analyze a two-stage telecommunication supply chain consisting of one operator and one vendor under a multiple period setting. The operator faces a stochastic market demand which depends on technology investment level. The decision variables for the operator are the initial technology investment level and the capacity of the network for each period. The capacity that the operator installs in one period also remains available in subsequent periods. The operator can increase or decrease the available capacity at each period. For this model, an algorithm to find the centralized optimal solution is proposed. A profit sharing contract where firms share both the revenue and operating costs generated throughout the periods along with initial technology investment is suggested. Also a coordinating quantity discount contract where the discount on the price depends on the total installed capacity is designed. The case where the vendor decides on the technology investment level and the operator decides on the capacity of the network is also analyzed and it is shown that this game has a unique Nash equilibrium.     

On the influence of boundary conditions on the modal properties of a base frame

Supports of turbomachineries can be designed as base frames, which are constructions of steel-plates. One of the most important design requirements of the turbomachinery system is to avoid of natural frequencies in the operating speed range. Thus, a rotor dynamics analysis (see e.g. [1]), which is usually carried out using transfer matrix methods or finite element methods has to take the dynamic stiffness of the base frame into account. However, there are several problems to identify this complex and frequency dependent parameter, for example the localization of excitation or measurement responses and the difficulty of the support of base frames, e.g jack screws. In this article the support of a test base frames is analyzed by modal analysis experimentally. (© 2014 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Synthesis and characterization of new (<Emphasis Type="Italic">E,E</Emphasis>)-dioximes and their divalent metal complexes

Two new soluble vic-dioxime ligands, 4-isopropylanilineglyoxime (L¹H₂) and 4-benzylpiperidineglyoxime (L²H₂) were prepared by reacting 4-isopropylaniline and 4-benzylpiperidine with anti-chloroglyoxime. Ten metal complexes were obtanied by reacting both ligands with Cu(II),Ni(II),Co(II), Zn(II), and Cd(II) cations. The ligands and their metal complexes were elucidated by elemental analysis, IR, UV-vis, ¹H NMR, and ¹³C NMR and also magnetic moments of the complexes were determined. The text was submitted by the authors in English.     

Synthesis of a new colorimetric receptor based on calix[4]pyrrole binding oxime for selective recognition of fluoride ions

A colorimetric anion sensor α-meso-heptaethylcalix[4]pyrrole-meso-3-aminophenyl-p-nitrobenzaldoxime was synthesised and characterised by various spectroscopic techniques. Anion-binding studies were carried out using UV–vis, and ¹H NMR titrations, revealing that the receptor exhibits selective recognition towards F^?  over other anions. The selectivity for F^?  among the halides is attributed mainly to the hydrogen bond interaction of the receptor with F^? . Receptor showed colour change from colourless to yellow in the presence of tetrabutylammonium fluoride with 1:2 stoichiometry. Cyclic voltammetry studies, carried out in CH₃CN, provided evidence of an anion-dependent electrochemical response with F^?  ion. This response was particularly dramatic in the case of receptor after the addition of ～1 equiv. of F^?  ion.     

A novel vic-dioxime ligand and its Ni(II), Cu(II) and Co(II) complexes containing calix[4]pyrrole moiety: synthesis, characterization and redox properties

A new calix[4]pyrrole functionalized vic-dioxime, 3-(4-methyl-9,9,14,14,19,19-hexaethylcalix[4]pyrrole)benzoaminoglyoxime (LH₂) was synthesized from anti-chloroglyoxime and 3-aminophenyl-calix[4]pyrrole at room temperature. The mononuclear complexes {nickel(II), copper(II) and cobalt(II)} of this vic-dioxime ligand were prepared and their structures were confirmed by elemental analysis, IR and UV–Vis spectrophotometry, magnetic susceptibility; the MS, ¹H and ¹³C NMR spectra of the LH₂ ligand and its Ni(II) complex were also recorded. The experimental results indicated that the ligand:metal ratio was 2:1 in the cases of Ni(II), Cu(II) and Co(II) complexes as is with most vic-dioximes. Electrochemical properties of the ligand, and its complexes were investigated in DMSO solution by cyclic voltammetry at 200?mV?s^?1 scan rate.