Regioselective 1,4-addition of nucleophiles to 1,3-diene monoepoxides catalyzed by palladium complex

1,3-Diene monoepoxides react with nucleophiles in the presence of palladium complex as a catalyst under neutral conditions to give 1,4-adducts selectively. The 1,4-adducts are allylic alcohols and there is a possibility of another nucleophilic attack. Ester of Monarch butterfly pheromone was prepared.     

Reactivity of the indole ring in palladium(II) complexes of 2N1O-donor ligands: cyclopalladation and pi-cation radical formation

The Pd(II) complexes of new 2N1O-donor ligands containing a pendent indole, 3-[N-2-pyridylmethyl-N-2-hydroxy-3,5-di(tert-butyl)benzylamino]ethylindole (Htbu-iepp), 1-methyl-3-[N-2-pyridylmethyl-N-2-hydroxy-3,5-di(tert-butyl)benzylamino]ethylindole (Htbu-miepp), 3-[N-2-pyridylmethyl-N-2-hydroxy-3,5-di(tert-butyl)benzylamino]methylindole (Htbu-impp), and 3-(N-2-pyridylmethyl-N-4-hydroxybenzylamino)ethylindole (Hp-iepp) (H denotes a dissociable proton), were synthesized, and the structures of [Pd(tbu-iepp)Cl] (1a), [Pd(tbu-iepp-c)Cl] (1b), [Pd(tbu-miepp)Cl] (3), and [Pd(p-iepp-c)Cl] (4) (tbu-iepp-c and p-iepp-c denote tbu-iepp and p-iepp bound to Pd(II) through a carbon atom, respectively) were determined by X-ray analysis. Complexes 1a prepared in CH(2)Cl(2)/CH(3)CN and 3 prepared in CH(3)CN have a pyridine nitrogen, an amine nitrogen, a phenolate oxygen, and a chloride ion in the coordination plane. Complex 1b prepared in CH(3)CN has the same composition as 1a and was revealed to have the C2 atom of the indole ring bound to Pd(II) with the Pd(II)-C2 distance of 1.973(2) A. The same Pd(II)-indole C2 bonding was revealed for 4. Interconversion between 1a and 1b was observed for their solutions, the equilibrium being dependent on the solvent used. Reaction of 1b and 4 with 1 equiv of Ce(IV) in DMF gave the corresponding one-electron-oxidized species, which exhibited an ESR signal at g = 2.004 and an absorption peak at approximately 550 nm, indicating the formation of the Pd(II)-indole pi-cation radical species. The half-life, t(1/2), of the indole radical species at room temperature was calculated to be 20 s (k(obs) = 3.5 x 10(-)(2) s(-)(1)) for 1b. The cyclic voltammogram for 1b in DMF gave two irreversible oxidation peaks at E(pa) = 0.68 and 0.80 V (vs Ag/AgCl), which were ascribed to the oxidation processes of the coordinated indole and phenolate moieties, respectively.     

Photocyclization of n-[ω-(cycloalken-1-yl)alkyl]-and n-[ω-(inden-3-yl)alkyl]phthalimides : Synthesis of spiro-nitrogen multicyclic systems

Photolysis of the N-[ω-(cycloalken-1-yl)alkyl]phthalimides 6b-$\text{e}$ in each case gave a pair of stereoisomers of spiro-nitrogen multicyclic systems (9b-$\text{e}$) in moderate yields, whose stereochemistry was determined by means of chemical and spectroscopic analyses. Similarly, in N-[ω-(inden-3-yl)alkyl]-phthalimides (8), spiro-nitrogen macrocycles up to 13-membered 13a-$\text{c}$ were obtained in good yields     

Simultaneous quantitative measurement of fourteen adrenal steroids by capillary column gas chromatography-mass spectrometry, and its clinical application

Until now, there has been little work covering all of the main native adrenal-cortical steroids in blood. We therefore established a method for the simultaneous quantitative measurement of 14 native adrenal-cortical steroids, which involves capillary column gas chromatography-mass spectrometry (GC--MS). Serum steroids were purified from serum with the Extrelut mini-column and then converted into stable derivatives for GC-MS by a combination of boronic cyclization and trimethylsilyl and methyloxime derivatization. The sensitivities (with a signal-to-noise ratio greater than or equal to 7) of our GC-MS method ranged from 0.1 to 1.0 ng/ml of serum, and the coefficients of variation of intra- and inter-assays were less than 19% for each steroid. Our newly devised method involving a capillary column GC-MS system has been proven to be a simple and suitable method for a diagnosis requiring simultaneous detection of many native adrenal steroids in clinical practice. The analysis time is only 4 h.     

Characterization and quantitation of clarithromycin polymorphs by powder X-ray diffractometry and solid-state NMR spectroscopy

Characterization of clarithromycin polymorph was performed by solid-state cross polarization and magic angle spinning (CP/MAS) 13C-NMR spectroscopy. Two polymorphs, form II and form I, of clarithromycins indicated characteristic resonances of C1 carbonyl carbon at 176.2 and 175.2 ppm, respectively. Since each peak of C1 carbon was well separated in the spectrum of the two polymorphs, we performed quantitative analysis of the polymorphic fraction from the peak area of these peaks. The peak area of form I was found to linearly increase with an increase of its content, with a correlation coefficient of above 0.99. Solid-state NMR was found to be a useful technique to determine the characteristics of the polymorphic forms.     

Characterization of molecular transport in poly(dimethylsiloxane) microchannels for electrophoresis fabricated with synchrotron radiation-lithography and UV-photolithography

In the present paper, a study was undertaken of molecular transport in ploy(dimethylsiloxane) microchannels that were fabricated by ultraviolet (UV)-photolithography and synchrotron radiation (SR)-lithography characterized and compared for microchip capillary electrophoresis by evaluating in-channel molecular dispersion. A fluorescent tag, sulforhodamine B was used as the probing molecule. It was found that microchannels made by SR-lithography fabrication were superior to those made by UV-photolithography fabrication in terms of molecular transport performance. A deep insight into surface conditions characterized by scanning electron microscopy suggested it was related to the difference in surface roughness. Chromatographic retention in electropherograms further supported such a conclusion, which depended on the phase ratio of the channel surface. The results revealed for PDMS microchannels in this work were in good agreement with the phenomenon found for glass microchannels in the literature.     

Kinetic study of the γ radiolysis of polyethylene

A kinetic study was made of the formation of hydrogen and trans-vinylene unsaturation in the radiolysis of polyethylene induced by γ rays with a dose rate of 6.35 × 10⁵ rad/hr at 30–100°C in vacuo. The rates of the formation of hydrogen and trans-vinylene unsaturation were described by the zero-order formation kinetics with respect to each concentration combined with the first-order disappearance. The apparent rate constant for the formation of hydrogen increased gradually with rising irradiation temperature to give the activation energy of 0.6 kcal/mole. On the other hand, those for the disappearance of hydrogen and the formation and disappearance of trans-vinylene unsaturation were almost independent of temperature. The G values for crosslinking and main-chain scission were obtained from the gel data by using the Charlesby-Pinner equation, and the activation energy of 1.5 kcal/mole was given for both of them. On the basis of these results the reactions induced by γ rays in solid polyethylene were discussed.     

Efficiency of radiation-induced main-chain scission of poly (methyl methacrylate) depends on the irradiation temperature because of coexisting monomer

Effect of irradiation temperature on the main-chain scission of poly (methyl methacrylate) (PMMA) caused by γ-irradiation was studied by means of gel permeation chromatography and ESR spectroscopy. Although no temperature dependency was observed on the scission efficiency for purified PMMA, the efficiency for crude or monomer-doped purified PMMA was decreased by decreasing the temperature below ca. 200 K. Above 200 K the efficiency was constant and did not depend on the purity of PMMA. ESR study of the irradiated PMMA revealed that the suppression of the scission below 200 K is induced by the addition of methyl methacrylate monomer to primary radical species, which otherwise cause the main-chain scission by warming the polymer above 200 K. The primary radical generated above 200 K immediately converts to the scission-type ? CH₂ ? ?(CH₃) COOCH₃ radical through the β-scission of the polymer main chain, so that the efficiency of the scission does not depend on both the impurity and the irradiation temperature. © 1994 John Wiley & Sons, Inc.     

A practical synthesis of 4′-thioribonucleosides

A practical synthesis of 4′-thioribonucleosides starting from inexpensive l-arabinose is described. 1,4-Anhydro-2,3-O-isopropylidene-4-thioribitol, which was prepared by using a novel reductive ring-contraction reaction, was converted to the 5-O-silylated sulfoxides. The Pummerer-type thioglycosylation of the sulfoxides gave the 4′-thioribonucleosides stereoselectively.     

Grinding-induced equimolar complex formation between thiourea and ethenzamide

We prepared and characterized a grinding-induced equimolar complex of thiourea with ethenzamide. When thiourea and ethenzamide were co-ground at a molar ratio of 3 : 1, new powder X-ray diffraction (PXRD) peaks were observed in addition to PXRD peaks of thiourea crystals. The optimum stoichiometry of the new structure was confirmed as 1 : 1 mol/mol. Effect of grinding time on the thiourea-ethenzamide equimolar complex formation was investigated by using PXRD, differential scanning calorimetry and Fourier transform infrared spectroscopy. The equimolar crystal structure was confirmed by X-ray diffraction measurements of the single crystal which was recrystallized from ethanol. It was found that the intermolecular hydrogen bond formations between thiourea and ethenzamide molecules contributed to the equimolar complex formation. The complex formation was not observed in the cases where benzamide, salicylamide or 3-ethoxybenzamide was co-ground with thiourea. 2-Alcoxyl benzamide structures should be required for the grinding-induced equimolar complex formation with thiourea.