Thermal expansion properties of Lu2-xFexMo3O12

The structures and thermal expansion properties of Lu2-xFexMo3O12 have been investigated by X-ray diffraction(XRD).XRD patterns at room temperature indicate that compounds Lu2-xFexMo3O12 with x≤1.3 exhibit an orthorhombic structure with space group Pnca;compounds with x=1.5 and 1.7 have a monoclinic structure with space group P21/a.Studies on thermal expansion properties show that the linear thermal expansion coefficients of orthorhombic phase vary from negative to positive with increasing Fe content.Attempts to make zero thermal expansion materials indicate that zero thermal expansion can be observed in Lu1.3Fe0.7Mo3O12 in the temperature range of 200-400℃.     

Charge ordering modulations in a Bi_0.4Ca_0.6MnO₃ film with a thickness of 110 nm

The low temperature sample stage in a transmission electron microscope is used to investigate the charge ordering behaviours in a Bi 0.4 Ca 0.6 MnO 3 film with a thickness of 110 nm at 103 K.Six different types of superlattice structures are observed using the selected-area electron diffraction(SAED) technique,while three of them match well with the modulation stripes in high-resolution transmission electron microscopy(HRTEM) images.It is found that the modulation periodicity and direction are completely different in the region close to the Bi 0.4 Ca 0.6 MnO 3 /SrTiO 3 interface from those in the region a little further from the Bi 0.4 Ca 0.6 MnO 3 /SrTiO 3 interface,and the possible reasons for this are discussed.Based on the experimental results,structural models are proposed for these localized modulated structures.     

不同压制压力下NiFe2O4纳米固体的ESR研究

 以反滴共沉定法制备了NiFe₂O₄纳米微粉，并在不同压力下将其压制成纳成米固体，然后用XRD谱和ESR谱研究了NiFe₂O₄纳米固体结构和界百状态随压制压力的变化。实验结果表明，NiFe₂O₄纳米固体的结构在高压下没有明显的变化，但其ESR谱的共振线宽和g因子值随着压力升高均表示出先逐渐增大至最大值，然手缓慢下降的规律。这种变化可以归因于纳米固体内部界面离子间的磁相互作用在压力的下所发生和变化。这引起实验结果境示，对于NiFe₂O₄纳米固体而言，最佳的成型压力是4.5 GPa，在此压力下，NiFe₂O₄纳米粒子既可以被压制成致密的纳米固体，又能够保留下它们的纳米结构和纳米性质。     

用过剩压法生长金刚石过程石墨再结晶现象的研究

 描述了在过剩压驱动下金刚石晶种外延生过程中，大量伴生的石墨再结晶现象。再结晶石墨抑制了金刚石的自发成核；它们分布于合成腔触媒金属的低温区，结晶数量多，晶粒片状分层，尺寸大，但出现乱层晶体结构；同时产生一定数量的无定形碳。分析认为，这与长时间的低过剩压驱动，触媒金属内有足够的碳源供给，并具备在高温高压下石墨充分结晶但又达不到完全石墨化条件有关。还讨论了在低过剩压驱动下，促进金刚石晶体外延生长的碳源可能是活化的碳原子，而不是具有乱层结构特征的再结晶石墨。     

Asymptotic solving method for sea-air coupled oscillator ENSO model

The ENSO is an interannual phenomenon involved in the tropical Pacific ocean-atmosphere interaction.In this article,we create an asymptotic solving method for the nonlinear system of the ENSO model.The asymptotic solution is obtained.And then we can furnish weather forecasts theoretically and other behaviors and rules for the atmosphere-ocean oscillator of the ENSO.     

Field-assisted spin-polarized electron transport through a single quantum well with spin-orbit coupling

We have investigated theoretically the field-driven electron transport through a single-quantum-well semiconductor heterostructure with spin-orbit coupling.The splitting of the asymmetric Fano-type resonance peaks due to the Dresselhaus spin-orbit coupling is found to be highly sensitive to the direction of the incident electron.The splitting of the Fano-type resonance induces the spin-polarization dependent electron current.The location and the line shape of the Fano-type resonance can be controlled by adjusting the energy and the direction of the incident electron,the oscillation frequency,and the amplitude of the external field.These interesting features may be used to devise tunable spin filters and realize pure spin transmission currents.     

液态甲烷的高温密度物态方程理论研究

 采用热力学统计理论研究了液态甲烷在高温高压下分子分解反应特点及该体系的物态方程。着重讨论了体系中CH₄-H₂分子间有效势对体系化学反应平衡及物态方程的影响,并根据实验Hugoniot点(p_H, V)优化确定出其exp-6势函数中的参数值。该势函数的排斥部分值比理想混合条件下Lorentz-Berthelot规则给出的势函数值低约50%,预示着高压下CH₄和H₂之间存在着某种亲合性。用该势函数计算得到的p-T线与现有的两个实验点符合很好。还讨论了CH₄-H₂之间的有效作用势参数对CH₄分子冲击离解度（x）的影响。     

纳米晶Y_2SiO_5∶Eu的浓度猝灭研究

报道了分别用溶胶－凝胶法合成的Ｙ２ＳｉＯ５∶Ｅｕ纳米晶和用高温固相法合成常规尺度的Ｙ２ＳｉＯ５∶Ｅｕ材料的光致发光光谱和猝灭浓度的实验研究．结果表明：纳米Ｙ２－ｘＥｕｘＳｉＯ５比常规尺度的Ｙ２－ｘＥｕｘＳｉＯ５有更高的猝灭浓度和更高的发光亮度．理论分析认为这是由于在纳米材料中能量共振传递被阻断和猝灭中心在各个纳米晶内分布的涨落造成的．这个结果为高亮度的Ｙ２ＳｉＯ５∶Ｅｕ纳米材料的实际开发应用展示了广阔前景．     

Plasma处理对有机薄膜电致发光器件性能及稳定性的影响

有机薄膜电致发光是双极注入的发光器件，电极及注入界面是影响器件性能的重要因素，采用高功函数透明电极及低功函数金属电极是普遍使用的方法，人们还采用高离化势的有机透明电极［１］，低离化势的ＣｕＰｃＢｕｆｅｒ层［２］，ｐｌａｓｍａ处理ＩＴＯ的方法［３］来改...