Ligand Modifications Produce Two-Step Magnetic Switching in a Cobalt(dioxolene) Complex

Mononuclear monodioxolene valence tautomeric (VT) cobalt complexes typically exist in their low spin (l.s.) Co^III(cat²⁻) and high spin (h.s.) Co^II(sq⋅⁻) forms (cat²⁻=catecholato, and sq⋅⁻=seminquinonato forms of 3,5−di−^tBu-1,2-dioxolene), which reversibly interconvert via temperature-dependent intramolecular electron transfer. Typically, the remaining four coordination sites on cobalt are supported by a tetradentate ligand whose properties influence the temperature at which VT occurs. We report that replacing one chelating pyridyl arm of tris(2-pyridylmethyl)amine (tpa) with a weaker field ortho-anisole moiety facilitates access to a third magnetic state, and examine a series of related complexes. Variable temperature crystallographic, magnetic, calorimetric, and spectroscopic studies support that this third state is consistent with l.s. Co^II(sq⋅⁻). Thus, our ligand modifications not only provide access to the VT transition from l.s. Co^III(cat²⁻) to l.s. Co^II(sq⋅⁻), but at higher temperatures, the complex undergoes spin crossover from l.s. Co^II(sq⋅⁻) to h.s. Co^II(sq⋅⁻), representing the first example of two-step magnetic switching in a mononuclear monodioxolene cobalt complex. We hypothesize that ligand dynamicity may facilitate access to the rarely observed l.s. Co^II(sq⋅⁻) intermediate state, suggesting a new design criterion in the development of stimulus-responsive multi-state molecular switches.     

Experimental test of the Sydney Young equation for the presentation of distillation curves

The distillation (or boiling) curve of a complex fluid is a critically important indicator of the bulk behavior or response of the fluid. For this reason, the distillation curve, usually presented graphically as boiling temperature against volume fraction distilled, is often cited as a primary design and testing criterion for liquid fuels, lubricants and other important industrial fluids. Clearly, the boiling temperatures that is measured near ambient conditions during the course of a distillation curve determination depend upon the local atmospheric pressure. For this reason, the user community is accustomed to data presented with an adjustment of the temperatures to those that would be observed at a standard atmospheric pressure of 101.325 kPa, or standard atmospheric pressure of 1 atm. Typically, this is done with a simplified Sydney Young equation. This correction makes little difference to measurements done consistently in a particular laboratory, or when the atmospheric pressure varies little. The correction can be quite large when measurements are done in laboratories at different elevations, however. In this paper, we describe an evaluation of this correction. Specifically, we performed measurements of the distillation curve of a binary mixture of (n-decane + n-tetradecane) at three elevations (and, therefore three different values of atmospheric pressures, (70.06, 82.73, and 101.00) kPa). Comparisons are made between the raw and adjusted values, and recommendations are presented as to when the equation might be inadequate.     

Precrystalline Aggregates Enable Control over Organic Crystallization in Solution

Understanding and controlling organic crystallization in solution is a long‐standing challenge. Herein, we show that crystallization of an aromatic amphiphile based on perylene diimide in aqueous media involves initially formed amorphous spherical aggregates that evolve into the crystalline phase. The initial appearance of the crystalline order is always confined to the spherical aggregates that are precursors for crystalline evolution. The change in the solvation of the prenucleation phase drives the crystallization process towards crystals that exhibit very different structure and photofunction. The initial molecular structure and subsequent crystal evolution can be regulated by tuning the hydrophobicity at various stages of crystallization, affording dissimilar crystalline products or hindering crystallization. Thus, the key role of the precrystalline states in organic crystal evolution enables a new strategy to control crystallization by precrystalline state manipulation.     

Activating a Low Overpotential CO2 Reduction Mechanism by a Strategic Ligand Modification on a Ruthenium Polypyridyl Catalyst

The introduction of a simple methyl substituent on the bipyridine ligand of [Ru(tBu₃tpy)(bpy)(NCCH₃)]²⁺ (tBu₃tpy=4,4′,4′′‐tri‐tert‐butyl‐2,2′:6′,2′′‐terpyridine; bpy=2,2′‐bipyridine) gives rise to a highly active electrocatalyst for the reduction of CO₂ to CO. The methyl group enables CO₂ binding already at the one‐electron reduced state of the complex to enter a previously not accessible catalytic cycle that operates at the potential of the first reduction. The complex turns over with a Faradaic efficiency close to unity and at an overpotential that is amongst the lowest ever reported for homogenous CO₂ reduction catalysts.     

Highly Efficient Synthesis of Multiantennary Bisected N‐glycans Based on Imidates

The occurrence of N‐glycans with a bisecting GlcNAc modification on glycoproteins has many implications in developmental and immune biology. However, these particular N‐glycans are difficult to obtain either from nature or through synthesis. We have developed a flexible and general method for synthesizing bisected N‐glycans of the complex type by employing modular TFAc‐protected donors for all antennae. The TFAc‐protected N‐glycans are suitable for the late introduction of a bisecting GlcNAc. This integrated strategy permits for the first time the use of a single approach for multiantennary N‐glycans as well as their bisected derivatives via imidates, with unprecedented yields even in a one‐pot double glycosylation. With this new method, rare N‐glycans of the bisected type can be obtained readily, thereby providing defined tools to decipher the biological roles of bisecting GlcNAc modifications.     

Facilitated hydride binding in an Fe-Fe hydrogenase active-site biomimic revealed by X-ray absorption spectroscopy and DFT calculations

Iron-only hydrogenases are high-efficiency biocatalysts for the synthesis and cleavage of molecular hydrogen. Their active site is a diiron center, which carries CO and CN ligands. Remarkably, the two iron atoms likely are connected by a non-protein azadithiolate (adt = S-CH2-NH-CH2-S). To dwell on the role of the adt in H2 catalysis, a specific biomimetic diiron compound, 1 = [Fe2(mu-adt-CH2-Ph)(CO)4(PMe3)2], with unprecedented positive reduction potential, has been synthesized and crystallized previously. It comprises two protonation sites, the N-benzyl-adt nitrogen that can hold a proton (H) and the Fe-Fe bond that will formally carry a hydride (Hy). We investigated changes in the solution structure of 1 in its four different protonation states (1', [1H]+, [1HHy]2+, and [1Hy]+) by X-ray absorption spectroscopy at the iron K-edge. EXAFS reveals that already protonation at the adt nitrogen atom causes a change of the ligand geometry involving a significant lengthening of the Fe-Fe distance and CO and PMe3 repositioning, respectively, thereby facilitating the subsequent binding of a bridging hydride. Hydride binding clearly is discernible in the XANES spectra of [1HHy]2+ and [1Hy]+. DFT calculations are in excellent agreement with the experimentally derived structural parameters and provide complementary insights into the electronic structure of the four protonation states. In the iron-only hydrogenases, protonation of the putative adt ligand may cause the bridging CO to move to a terminal position, thereby preparing the active site for hydride binding en route to H2 formation.     

Improved and expanded one-pot,two-component Boulton-Katritzky syntheses of N–N bond containing bicyclic heterocycles

Improved and expanded one-pot, two-component syntheses of bicyclic heterocycles containing a 3-N-acyl-3-amino-1,2-pyrazole motif from N′-hydroxy-carboxyamidines and acylbenzotriazoles have been developed. Importantly, this sequence obviates the need for hydrazine or N-aminating reagents to synthesize the key nitrogen–nitrogen (N–N) bond of these heterocycles, which is formed via Boulton-Katritzky rearrangement. A diverse array of pharmaceutically relevant N–N containing heterocycles has been prepared with this methodology using readily available reagents without the need for special equipment or conditions.     

3D collapse of rotating stellar iron cores in general relativity including deleptonization and a nuclear equation of state

We present 2D and 3D simulations of the collapse of rotating stellar iron cores in general relativity employing a nuclear equation of state and an approximate treatment of deleptonization. We compare fully general relativistic and conformally flat evolutions and find that the latter treatment is sufficiently accurate for the core-collapse supernova problem. We focus on gravitational wave (GW) emission from rotating collapse, bounce, and early postbounce phases. Our results indicate that the GW signature of these phases is much more generic than previously estimated. We also track the growth of a nonaxisymmetric instability in one model, leading to strong narrow-band GW emission.     

Counterexamples to the well-posedness of transmission boundary value problems for the Laplacian

In this note we show that the well-posedness range for transmission boundary value problems for the Laplacian in the class of Lipschitz domains established by Escauriaza and Mitrea (2004) is sharp. Our approach relies on Mellin transform techniques for singular integrals naturally associated with the transmission problems and on a careful analysis of the spectra of such singular integrals.