Enthalpies of mixing of ethanol solution of chiral limonenes at 298.15 K

Enthalpies of mixing of ethanol solution of R- and S-enantiomers of limonene in large concentration have been measured at 298.15 K. The enthalpies of mixing were negligibly small for all concentrations. Enthalpies of mixing showed negative in less than 30 mol%, but positive in more than the high concentration of limonenes. The heterochiral solutions were more stable than each of the homochiral solutions in dilute solutions. The concentration dependence on enthalpies of mixing in dilute concentration of less than 10 mol% was much sharper in inclination than the dense solutions limonene.     

Test compounds for detecting the silanol effect on the elution of ionized amines in reversed‐phase LC

The effectiveness of several basic compounds for testing silica‐based stationary phases was reviewed by applying them to recent columns for reversed‐phase HPLC. Most octadecylsilylated (C18) stationary phases, prepared as a base‐deactivated material from high‐purity silica gel with endcapping, provided excellent peak shape and column efficiency for the bases including benzylamine and amitriptyline that once caused problems and were subsequently employed for testing silanol activities. However, a cyclic tertiary amine, dextrometorphan, was eluted as an acceptable peak from only a few columns at neutral pH. Such a more sensitive probe is expected to contribute to further improvement of the stationary phase for reversed‐phase HPLC.     

On the image of the Saito-Kurokawa lifting over a totally real number field and the Maass relation

We give a formula for the Fourier coefficients of the image of the Saito-Kurokawa lifting over a totally real number field $K$ , and we prove the image of the lifting satisfies a generalization of the Maass relation. We also give an explicit form of a Siegel series of degree 2 for any finite extension of ${\mathbb {Q}}_p$ .     

Swelling behavior of chemically crosslinked PVA gels in mixed solvents

We report the swelling behavior of chemically crosslinked polyvinyl alcohol (PVA) gels with different degrees of hydrolysis in water, several organic solvents, and their mixed solvents. The gels were dried after gelation and were put into their respective solvents. The gel volume in pure water decreased with increasing temperatures, and the total changes increased with decreasing degrees of hydrolysis. The swelling ratio depends on the solvent and its concentration. In the cases of mixed solvents of methanol–water, ethanol–water, and acetone–water, the gels shrank continuously with increasing concentrations of solvents and reached the collapsed state in the pure organic solvent. In the case of dimethyl sulfoxide (DMSO), on the other hand, the gels shrunk, swelled, and finally reached the swollen state in pure DMSO. Results of measurements using Fourier Transform infrared spectroscopy (FTIR) and X‐ray diffraction (XRD) suggested that crosslinks and microcrystallites were formed due to hydrogen bonds during the drying process after gelation. The hydrogen bonds were partly destroyed in a rich solvent, but the residual hydrogen bonds had an essential role in determining the swelling behavior in a poor solvent. The swelling behavior and the possible phase transition of the present system are discussed in terms of the solubility of polymers with different degrees of hydrolysis in given mixed solvents and in terms of the formation and destruction of physical crosslinks in the chemical PVA gels. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1978–1986, 2010     

Rapid enantioseparation of 1-aminoindan by microchip electrophoresis with linear-imaging UV detection.

Chiral separations of 1-aminoindan (AI) by cyclodextrin electrokinetic chromatography (CDEKC) were investigated on microfluidic quartz chips. By using a microchip electrophoresis (MCE) instrument equipped with a linear-imaging UV detector, the separation process of the enantiomeric compounds was observed. When sulfated beta-cyclodextrin was employed as a chiral selector, the baseline separation of AI could be achieved within 1 min with a high repeatability. The relative standard deviation of the migration time was less than 6%. The fastest separation was achieved in 14 s, utilizing a separation length of only 6.1 mm. These results show that the MCE analysis employing a linear imaging UV detector has a significant potential for fast chiral analysis.     

Near Field Stimulated Time of Flight Mass Surface Analyzer

This work describes a groundbreaking process that provides a direct highly localized measurement of the atomic mass on surfaces at room temperature. Employing an original system that joins a scanning tunneling microscopy (STM) device and a time of flight (TOF) mass analyzer, we could previously ionize surface atoms by the combination of an optical laser pulse and an electric pulse at the STM tip. Desorbed ions from a localized area were accelerated and detected by a TOF chamber. We will demonstrate in this paper that high localization and mass discrimination can be obtained even without the aid of an electric pulse from the tip. We reduced the angle of incidence of the laser beam to zero (laser beam parallel to the sample surface). In this condition we were able to demonstrate for the first time ionic desorption at a confinement level of the order of 5-10nm, an order of magnitude better than previous configurations.This paper was originally presented at the 11th Optical Near Field Workshop, which was held on June 28, 2002 at Tokyo Institute of Technology, Yokohama, organized by the Optical Near Field Group of the Optical Society of Japan, an affiliate of the Japan Society of Applied Physics.     

A novel skeletal drug delivery system for anti-bacterial drugs using self-setting hydroxyapatite cement

To solve the problem of delivering drugs to skeletal tissue at high enough local concentrations for desirable therapeutic effects, we report a novel approach using a self-setting hydroxyapatite cement, with cephalexin and norfloxacin as model drugs. After setting, the cement was transformed into hydroxyapatite with affinity for hard bone tissue. Continuous in-vitro drug release profiles from loaded cement pellets (0.9-4.8% by weight) in phosphate buffer at pH 7.4 and 37 degrees C followed the Higuchi equation.     

Palladium‐catalyzed three‐component coupling polycondensation of aromatic diiodide,aromatic bis(boronic acid propanediol ester), and norbornadiene: A new route for poly(p‐phenylene vinylene)

A novel synthetic method for soluble precursor polymers of poly(p‐phenylene vinylene) (PPV) derivatives by the palladium‐catalyzed three‐component coupling polycondensation of aromatic diiodides, aromatic bis(boronic acid) derivatives, and norbornadiene is described. For example, the polymerization of 1,4‐diiodo‐2,5‐dioctyloxybenzene, benzene‐1,4‐bis(boronic acid propanediol ester), and norbornadiene at 100 °C for 3 days provided a polymer consisting of the three monomer units in a 97% yield (number‐average molecular weight = 3100, weight‐average molecular weight/number‐average molecular weight = 1.37). A derivative of PPV was produced smoothly by the retro Diels–Alder reaction of the polymer both in a dodecyloxybenzene solution and in a film at 200 °C in vacuo. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3403–3410, 2005