Energy-saving drying technology for porous media using liquefied DME gas

Process design and energy requirement for a practical plant are investigated for an energy-saving drying (dewatering) process invented by the authors in 2002 for high-moisture porous materials. The basic concept of the process involves the extraction of water from a high-moisture porous material by bringing it in physical contact with liquefied dimethyl ether (DME) at room temperature. Water content of DME asymptotically increases to the saturation value and the high-moisture porous material is dried almost perfectly. DME from the DME-water mixture is vaporized by decompression. DME and water are separated by flash distillation. DME vapor is compressed and cooled in a heat exchanger, and the latent heat of condensation is reused to vaporize the DME in the heat exchanger. Multistage compression and multistage flash distillation are employed. After compression, the temperature of DME is less than 50?°C. Because specific heat ratio of DME is only 1.11, the energy consumption of the compressor is reduced. Considering the adiabatic efficiency of the compressor and the net thermal efficiency, the total energy for dewatering is about 1100 kJ per 1-kg-water-content of the material being dewatered This process has significant potential and is compact than the existing dewatering processes.     

Copper–Oxygen Dynamics in the Tyrosinase Mechanism

The dinuclear copper enzyme, tyrosinase, activates O₂ to form a (μ-η²:η²-peroxido)dicopper(II) species, which hydroxylates phenols to catechols. However, the exact mechanism of phenolase reaction in the catalytic site of tyrosinase is still under debate. We herein report the near atomic resolution X-ray crystal structures of the active tyrosinases with substrate l -tyrosine. At their catalytic sites, CuA moved toward l -tyrosine (CuA1 → CuA2), whose phenol oxygen directly coordinates to CuA2, involving the movement of CuB (CuB1 → CuB2). The crystal structures and spectroscopic analyses of the dioxygen-bound tyrosinases demonstrated that the peroxide ligand rotated, spontaneously weakening its O−O bond. Thus, the copper migration induced by the substrate-binding is accompanied by rearrangement of the bound peroxide species so as to provide one of the peroxide oxygen atoms with access to the phenol substrate's ϵ carbon atom.     

Stereoselective Syntheses of all the Possible Stereoisomers of Coronafacic Acid

An efficient and stereoselective syntheses of all the possible stereoisomers of coronafacic acid (CFA) has been developed. The stereochemistries of C3a and C7a were controlled in a diastereoselective Diels-Alder type cycloaddition using a chiral auxiliary. CFA and 6-epi-CFA were synthesized by hydrogenation of a common intermediate. During the synthesis of 6-epi-CFA, we established that its cis-fused configuration is important for the introduction of C4-C5 double bond by dehydration. This report is the first practical synthesis of both 6-epi-CFA, and its enantiomer.     

Crystal structure of poly(p-benzamide)

Redetermination of the crystal structure of poly(p-benzamide) was made by using newly collected intensity data. The molecular conformation is TCTC, where the internal rotation angles about the N? C bond of the amide group and about the virtual bond of N-phenyl-C are T (trans) and C (cis) conformations, respectively. Two molecular chains pass through a rectangular unit cell with dimension, a = 7.75 Å, b = 5.30 Å, c (fiber axis) = 12.87 Å, and the space group, P2₁2₁2₁-D. The reflection observed at the spacing of 010 may be attributed to the reflection due to another crystal polymorph or the diffuse scattering due to disorder. © 1993 John Wiley & Sons, Inc.     

Synthesis of Urea‐Tethered Disaccharides in Water

A new method for the synthesis of urea‐linked disaccharides in aqueous media has been developed. The key feature of our approach is two strained Steyermark‐type gluco‐ and galactopyranosyl oxazolidinones. Each oxazolidinone is attached to a pyranose ring in a di‐equatorial trans‐annulation framework. Reaction of these oxazolidinones with 4‐aminohexopyranose in water proceeded smoothly to afford the urea‐tethered cellobiose and lactose analogues. The galactose‐type oxazolidinone proved to be more reactive than the glucose‐type, which is explained by the presence of an axial hydroxy group at C4 in the former.     

Biodegradable network elastomeric polyesters from multifunctional aliphatic carboxylic acids and poly(epsilon-caprolactone) diols

Biodegradable elastomeric network polyesters were prepared from multifunctional aliphatic carboxylic acids such as tricarballylic acid (Yt) or meso-1,2,3,4-butanetetracarboxylic acid (Xb) and poly(epsilon-caprolactone) (PCL) diols with molecular weights of 530, 1,250 and 2,000 g.mol-1. Prepolymers prepared by a melt polycondensation were cast from DMF solution and postpolymerized at 280 degrees C for various periods of times to form a network. The resultant films were transparent, flexible and insoluble in organic solvents. The network polyesters obtained were characterized by IR absorption spectra, WAXS, density measurement, DSC, and tensile test. YtPCL1250, and XbPCL1250 network polyester films showed good elastomeric properties with high ultimate elongation (540-590%), and low Young's modulus (2.5-3.3 MPa). The enzymatic degradation was estimated by the weight loss of network films in a buffer solution with Rhizopus delemar lipase at 37 degrees C. The degree and rate of degradation were significantly affected by the molecular weight of PCL diol, chemical structures of multifunctional aliphatic carboxylic acids and the morphology of network films. The changes in the solid states of network films during the degradation were also estimated by the results of DSC and WAXS. [see text]     

Bioorganic studies on plant movement, from natural products to its receptor

The chemical aspects of the circadian leaf movement known as "nyctinasty" are discussed in this paper. Each of the nyctinastic plants of five different genera so far examined contained a pair of factors, one of which induced leaf closure and another induced leaf opening. The relative contents of the closing and opening factors changed correlating with the nyctinastic leaf movement. The use of fluorescence-labeled and photoaffinity-labeled factors revealed that the factors bind to specific cells, the motor cells, present in the pulvini, and that the membrane fraction of the motor cells contained two proteins of 210 and 180 kDa, which can bind to the factors.     

Phosphoproteome Profiling Using a Fluorescent Phosphosensor Dye in Two-Dimensional Polyacrylamide Gel Electrophoresis

We validated the novel PhosphoQUANTI SolidBlue Complex (PQSC) dye for the sensitive fluorescent detection of phosphorylated proteins in polyacrylamide- and two-dimensional gel electrophoresis (PAGE and 2DE, respectively). PQSC can detect as little as 15.6 ng of ß-casein, a pentaphosphorylated protein, and 61.3 ng of ovalbumin, a diphosphorylated protein. Fluorescence intensity correlates with the number of phosphorylated residues on the protein. To demonstrate the specificity of PQSC for phosphoproteins, enzymatically dephosphorylated lysates of Swiss 3T3 cells were separated in 2DE gels and stained by PQSC. The fluorescence signals in these gels were markedly reduced following dephosphorylation. When the phosphorylated proteins in Swiss 3T3 cell lysates were concentrated using a phosphoprotein enrichment column, the majority of phosphoproteins showed fluorescence signals in the pI 4–5 range. Finally, we performed phosphoproteome analysis to study differences in the protein phosphorylation profiles of proliferating and quiescent Swiss 3T3 cells. Over 135 discernible protein spots were detected, from which a selection of 15 spots were identified by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI TOF-MS). The PQSC staining procedure for phosphoprotein detection is simple, reversible, and fully compatible with MALDI TOF-MS.     

Unique thermal behavior of acrylic PSAs bearing long alkyl side groups and crosslinked by aluminum chelate

An acrylic pressure-sensitive adhesive (PSA), bearing octadecyl acrylate, methyl acrylate and acrylic acid groups, and crosslinked by aluminum acetylacetonate (AlACA), displayed behavior unique among acrylic PSAs in that its adhesion, which decreases with an increase in temperature, began to increase again from around 150 °C. In order to understand this behavior, the structure and thermal properties of the PSA were investigated in detail, along with another PSA crosslinked by a covalent crosslinking agent (Az). From thermal mechanical analysis, the PSA with ionic crosslinks (AlACA) showed three softening points at 20, 60, and 160 °C. In comparison, the PSA covalently crosslinked by Az only exhibited two softening points (at 20 and 60 °C). The softening point at 160 °C is clearly related to ionic chelate crosslinking. DSC measurements indicated that the softening point at 20 °C resulted from melting of the ordered octadecyl group, and the softening point at 60 °C was due to an increase in the mobility of the main chain. The temperature dependence of viscoelastic measurements revealed that the viscosity of the PSA crosslinked by AlACA increased at around 160 °C. From these results, we considered that the distinctive adhesion of the PSA crosslinked by AlACA could be due to ligand exchange at the aluminum crosslinking points, which are chelated by carboxy groups built in the main chain.     

Fluidic shear-assisted formation of actuating multilamellar lipid tubes using microfabricated nozzle array device

Molecular self-assemblies exhibiting automatic motions have received much attention as potential artificial models of living organisms. We have developed a microfluidic picolitre nozzle-array device to form multilamellar lipid tubes (MLTs) under fluidic shear stress, which transformed into different two patterns (yarn-balls and double-helixes) and also exhibited unique self-actuation behaviors.