Dynamic response of an axially loaded rigid sphere embedded in a saturated poroelastic medium

In this paper, an analytical solution for the response of a rigid sphere embedded in a full space poroelastic medium subjected to a dynamic lateral load is derived. The solution is obtained using Biots theory for acoustic waves. In this solution, the displacements of the solid skeleton and the pore pressure are expressed in terms of three scalar potentials. These potentials correspond to the wave velocities of the slow and fast compressional waves and to the shear wave. The governing equation for the dynamic motion is expressed in the frequency domain using Fourier transformation. Different boundary and load conditions were investigated. Curves showing variation in the fluid pressure and solid displacements with the loads frequency were plotted in non-dimensional forms.     

Structural Insights and Docking Analysis of Adamantane-Linked 1,2,4-Triazole Derivatives as Potential 11β-HSD1 Inhibitors

The solid-state structural analysis and docking studies of three adamantane-linked 1,2,4-triazole derivatives are presented. Crystal structure analyses revealed that compound 2 crystallizes in the triclinic P-1 space group, while compounds 1 and 3 crystallize in the same monoclinic P2₁/c space group. Since the only difference between them is the para substitution on the aryl group, the electronic nature of these NO₂ and halogen groups seems to have no influence over the formation of the solid. However, a probable correlation with the size of the groups is not discarded due to the similar intermolecular disposition between the NO₂/Cl substituted molecules. Despite the similarities, CE-B3LYP energy model calculations show that pairwise interaction energies vary between them, and therefore the total packing energy is affected. HOMO-LUMO calculated energies show that the NO₂ group influences the reactivity properties characterizing the molecule as soft and with the best disposition to accept electrons. Further, in silico studies predicted that the compounds might be able to inhibit the 11β-HSD1 enzyme, which is implicated in obesity and diabetes. Self- and cross-docking experiments revealed that a number of non-native 11β-HSD1 inhibitors were able to accurately dock within the 11β-HSD1 X-ray structure 4C7J. The molecular docking of the adamantane-linked 1,2,4-triazoles have similar predicted binding affinity scores compared to the 4C7J native ligand 4YQ. However, they were unable to form interactions with key active site residues. Based on these docking results, a series of potentially improved compounds were designed using computer aided drug design tools. The docking results of the new compounds showed similar predicted 11β-HSD1 binding affinity scores as well as interactions to a known potent 11β-HSD1 inhibitor.     

The production of prop-2-ynylideneamine by thermolysis of N-chloropropargylamine,N-fluoropropargylamine and N-hydroxypropargylamine: a computational study

Ab initio molecular orbital calculations using MP2 and DFT/B3LYP methods at the 6-311++G(d,p) and aug-cc-pvdz basis sets were applied to characterise the kinetics of the thermal dissociation of HC≡CCH₂NHX [where X = OH(I), F(II) and Cl(III)] to produce Z- and E-prop-2-ynylideneamines (HC≡CCH=NH) (IV and V, respectively), which tautomerise to vinyl cyanide (CH₂=CHC≡N) (VI). The optimised geometries and electronic energies of reactants, transition states and products were estimated and discussed. A concerted proton migration and HX abstraction mechanism was proposed for the imine formation. The reliance of these properties on the elected levels of theory was discussed. The activation energies and barrier heights for the Z- and E-forms and their vinyl cyanide tautomers were estimated and analysed. The Z-form was computed to be more stable than the E-form. Using natural bond orbital calculations, the origin of the preference of the Z-form was attributed mainly to the N lone pair delocalisations. Vinyl cyanide was located to have a lower energy (33–35 kcal/mol) than prop-2-ynylideneamine. The provenance of the preference of the former and its tautomerisation mechanism will be addressed in a separate publication.     

Microwave-assisted synthesis and antioxidant properties of hydrazinyl thiazolyl coumarin derivatives

ABSTRACT: Coumarin derivatives exhibit a wide range of biological properties including promising antioxidant activity. Furthermore, microwave-assisted organic synthesis has delivered rapid routes to N- and O-containing heterocycles, including coumarins and thiazoles. Combining these features, the use of microwave-assisted processes will provide rapid access to a targeted coumarin library bearing a hydrazino pharmacophore for evaluation of antioxidant properties. RESULTS: Microwave irradiation promoted 3 of the 4 steps in a rapid, convergent synthesis of a small library of hydrazinyl thiazolyl coumarin derivatives, all of which exhibited significant antioxidant activity comparable to that of the natural antioxidant quercetin, as established by DPPH and ABTS radical assays. CONCLUSIONS: Microwave dielectric heating provides a rapid and expedient route to a series of hydrazinyl thiazolyl coumarins to investigate their radical scavenging properties. Given their favourable properties, in comparison with known antioxidants, these coumarin derivatives are promising leads for further development and optimization.     

Syntheses and modifications of bisdiazonium salts of 3,8-benzo[c]cinnoline and 3,8-benzo[c]cinnoline 5-oxide onto glassy carbon electrode and the characterization of the modified surfaces

The goal of this study was to prepare novel glassy carbon electrode surfaces using two similar bis-diazonium salts, 3,8-benzo[c]cinnoline (3,8-BCC-BDAS) and 3,8-benzo[c]cinnoline 5-oxide (3,8-BCCNO-BDAS) at the glassy carbon (GC) surface. These diazonium salts were reduced electrochemically and covalently electrografted onto the glassy carbon electrode surface to form modified electrodes. Electrochemical reduction of 3,8-BCC-BDAS and 3,8-BCCNO-BDAS salts on the electrode surface yielded a compact and stable film. The existence of BCC moieties on the GC surface was characterized by X-ray photoelectron spectroscopy, reflectance-adsorption infrared spectroscopy, cyclic voltammetry, ellipsometry, and electrochemical impedance spectroscopy. The stability and working potential range of the novel modified electrodes were also studied. The possibility of analytical application of these novel surfaces for inorganic cations and especially selectivity to copper ions was investigated. 3,8-diaminobenzo[c]cinnoline (3,8-DABCC) and its 5-oxide derivative (3,8-DABCCNO) were synthesized from the reductive cyclization of 2,2′-dinitrobenzidine and prepared their bisdiazonium salts via the tetrazotization reactions of the diamines with NaNO₂. The structures of 3,8-DABCC and 3,8-DABCCNO and their corresponding bisdiazonium salts are confirmed by spectral analysis.     

Determination of pK a of benzoic acid- and p-aminobenzoic acid-modified platinum surfaces by electrochemical and contact angle measurements

Acidity constant values of benzoic acid (BA)-modified platinum electrode (Pt-BA) and p-aminobenzoic acid (pABA)-modified platinum electrode (Pt-NHBA) surfaces were determined using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and contact angle measurements (CAM). Diazonium tetrafluoroborate salt reduction and pABA oxidation reactions were used to prepare (Pt-BA) and (Pt-NHBA) surfaces, respectively. Both surfaces exhibited pH dependence with [Fe(CN)₆]^3?/4? redox probe solutions at different pH; this allowed us to estimate the surface pK _a values. Acidity constants for Pt-BA surface were found to be pK _a (3.09 ± 0.25), (4.89 ± 0.11), and (3.91 ± 0.54) by CV, EIS, and CAM techniques, respectively, while the values for Pt-NHBA surface were pK _a (3.16 ± 0.45), (4.24 ± 0.40), and (5.64 ± 0.12). The Pt-BA surface pK _a values were lower in CV and CAM measurements relative to the bulk solution of BA, while a higher value was observed in EIS for Pt-BA surface. The pK _a values determined for Pt-NHBA surface via both CV and EIS were lower than the bulk value; however, the result obtained from CAM was one unit higher than pK _a of bulk pABA.     

Ruthenium(II) complexes bearing pyridine‐based tridentate and bidentate ligands: catalytic activity for transfer hydrogenation of aryl ketones

Ru(II) complexes of the general formula [RuCl₂(′′)(L)] (1: ′N = N_b, L = MeOH; 2: ′N = N_b, L = CH₃CN; 3: ′N = N_d, L = CH₃CN; 4: ′N = N_p, L = CH₃CN), [Ru(p‐cymene)(_a–b)Cl]Cl (5a: N N_a = 2,2′‐bipyridine; 5b: N N_b = 4,4′‐dimethyl–2,2′‐bipyridine), [Ru(′′)(_a–b)Cl]Cl (6a: ′N = N_b, _a = 2,2′‐bipyridine; 6b: ′N = N_b, _b = 4,4′‐dimethyl‐2,2′‐bipyridine; 7a: ′N = N_d, _a = 2,2′‐bipyridine; 7b: ′N = N_d, _b = 4,4′‐dimethyl‐2,2′‐bipyridine; 8a: ′N = N_p, _a = 2,2′‐bipyridine; 8b: ′N = N_p, _b = 4,4′‐dimethyl‐2,2′‐bipyridine) and [Ru(′′)(_a)Cl]BF₄ (9a: ′N = N_b; _a = 2,2′‐bipyridine) were synthesized from the corresponding [RuCl₂(p‐cymene)]₂ dimer, ′′ and _a–b ligands. The compounds were characterized by elemental analysis, IR and NMR. Complex 9a was studied by X‐ray diffraction, confirming its cationic‐mononuclear [RuCl(_bb)(_a)]⁺ nature. The synthesized Ru(II) complexes (1–8) were employed as catalysts for the transfer hydrogenation of ketones to secondary alcohols in the presence of KOH using 2‐propanol as a hydrogen source at 82°C. The rates of the transfer hydrogenation reactions strongly depended on the type of and ancillary ligands. Copyright © 2012 John Wiley & Sons, Ltd.     

Some characteristic behavior of mixed spin-1/2 and spin-1 Ising nano-tube

The magnetization of a cylindrical Ising nano-tube is investigated by the use of the effective field theory with correlations. The effects of the crystal field couplings at the surface shell to the order parameters, susceptibility, internal energy, specific heat and free energy are investigated. Some characteristic phenomena are examined in the thermal variations, depending on crystal field term. Moreover, tricritical and critical points are found on the (D/J,kT/J) plane, where D/J and kT/J are reduced crystal-field and temperature, respectively.     

Thermomechanical analysis of the tannins of <Emphasis Type="Italic">Acacia Nilotica</Emphasis> spp. <Emphasis Type="Italic">Nilotica</Emphasis> as a rapid tool for the evaluation of wood–based adhesives

In this article, autocondensation reactions of Acacia nilotica spp. nilotica (Ann) tannin extracts solutions have been studied at several pH values by thermomechanical analyzer (TMA). TMA has been chosen for this study as it has been shown to give results more rapidly and more precisely than panels. It also tends to exaggerate the differences in results which render it an excellent tool for comparison. Therefore, autocondensation reactions were studied and compared with its polycondensation reactions upon addition of different hardeners such as paraformaldehyde, urea, and PMDI at same pH values. The aim was to evaluate the tannin’s reactivity and therefore its suitability for the production of commercially and technically viable tannin adhesives for wood products. The results of autocondensation showed that the maximum Young’s modulus values (3300 and 3600 MPa) were obtained at pH 4. However, these values have been achieved at high temperature (160 and 208 °C). Results of copolymerization reaction of the tannins with different hardeners revealed that some of these co-reactants were found to depress tannins autocondensations, while others appear to enhance the formation of the final networking. Polycondensation of the Ann tannins with 8% paraformaldehyde and 10% PMDI gave the maximum Young’s modulus values at lower temperature (91–101 °C) and acidic pH5. However, the addition of 20 and 30% PMDI achieved the best Young’s modulus values 2300 and 3300 MPa, respectively, at pH 4. Furthermore, the obtained values were comparable to those obtained by the addition of urea and the self condensation reactions. This is very important for particleboard production from economical and technical point of view. It has been noticed that the addition of hardeners lowered the temperature of hardening, and the obtained values were more consistent with the pH acidity. The study concluded that the tannins of Ann were very reactive, and therefore, it could be a potential precursor for particleboard adhesives. The results also indicated that the tannins can be used alone, and it would possibly produce zero emission environmentally friendly particleboard.     

Chitosan/cyclodextrin nanoparticles as drug delivery system

One of the most attractive areas of research in drug delivery is the design of nanomedicines consisting of nanosystems that are able to deliver drugs to the right place, at appropriate time. Natural polysaccharides, due to their outstanding merits, have received more and more attention in the field of drug delivery systems. In particular, polysaccharides seem to be the most promising materials in the preparation of nanometric carriers. The main goal of the present study was to investigate the potential of a recent generation of hybrid polysaccharide nanocarriers, composed of chitosan (CS) and an anionic cyclodextrin, carboxymethyl-β-cyclodextrin (CM-β-CD), for the encapsulation of a model drug, sulindac. CS and CM-β-CD were processed to nanoparticles (NPs) via the ionotropic gelation technique. The stoichiometric ratio between these two polymers was found to influence particle size and zeta potential. Decreasing CS:CM-β-CD ratio led to an increase in particle size and decrease in zeta potential. DSC and FTIR analyses confirmed formation of NPs and encapsulation of sulindac inside them. Release profiles indicate a continuous release of the drug throughout 24?h. However, the rate of release was more rapid during the first hours; about 55–90% of the drug being released after 3?h.