Coordination of methyl coenzyme M and coenzyme M at divalent and trivalent nickel cyclams: model studies of methyl coenzyme M reductase active site

Divalent and trivalent nickel complexes of 1,4,8,11-tetraazacyclotetradecane, denoted as cyclam hereafter, coordinated by methyl coenzyme M (MeSCoM(-)) and coenzyme M (HSCoM(-)) have been synthesized in the course our model studies of methyl coenzyme M reductase (MCR). The divalent nickel complexes Ni(cyclam)(RSCoM)(2) (R = Me, H) have two trans-disposed RSCoM(-) ligands at the nickel(II) center as sulfonates, and thus, the nickels have an octahedral coordination. The SCoM(2-) adduct Ni(cyclam)(SCoM) was also synthesized, in which the SCoM(2-) ligand chelates the nickel via the thiolate sulfur and a sulfonate oxygen. The trivalent MeSCoM adduct [Ni(cyclam)(MeSCoM)(2)](OTf) was synthesized by treatment of [Ni(cyclam)(NCCH(3))(2)](OTf)(3) with ((n)Bu(4)N)[MeSCoM]. A similar reaction with ((n)Bu(4)N)[HSCoM] did not afford the corresponding trivalent HSCoM(-) adduct, but rather the divalent nickel complex polymer [-Ni(II)(cyclam)(CoMSSCoM)-](n) was obtained, in which the terminal thiol of HSCoM(-) was oxidized to the disulfide (CoMSSCoM)(2-) by the Ni(III) center.     

Fully automated reagent peak‐free liquid chromatography fluorescence analysis of highly polar carboxylic acids using a column‐switching system and fluorous scavenging derivatization

In this study, we combined a column‐switching system with a fluorous scavenging derivatization method to develop a fully automated reagent peak‐free LC fluorescence detection protocol for the analysis of highly polar carboxylic acids. In this method, highly polar carboxylic acids were derivatized with fluorescent 1‐pyrenemethylamine in the presence of 1‐ethyl‐3‐(3‐dimethylaminopropyl)carbodiimide and 1‐hydroxy‐1H‐benzotriazole. Residual excess of the unreacted reagent was tagged with 2‐(perfluorooctyl)ethyl isocyanate and then removed selectively using a fluorous column‐switching system placed in front of an analytical reversed‐phase column. The signal of the fluorous‐tagged unreacted reagent was completely absent in the resulting chromatograms; therefore, it did not interfere with the quantification of each acid especially those eluted before 20 min. The detection limits (S/N = 3) for the examined acids were in the range from 4.0 to 22 fmol per injection. We have applied this method to comparative analysis of highly polar carboxylic acids in urine samples obtained from diabetes mellitus type‐II model mice and their control.     

Thermal decomposition of vinylacetylene in shock waves

The thermal decomposition of vinylacetylene (C₄H₄) was studied behind reflected shock waves using both a single-pulse method (reaction time between 0.8 and 3.3 ms) and a time-resolved UV-absorption method (230 nm). The studies were done over the temperature range of 1170–1690 K at the total pressure range of 1.3–2.3 atm. The mechanism was used to interpret both the early and late stages of vinylacetylene decomposition at the high temperatures. It was confirmed that C₄H₄ dissociation proceeded through the following three channels. The rate constant expression of reaction (1) was determined as k₁ = 6.3 × 10¹³ exp(?87.1 kcal/RT) s^?1. The rate constants of the succeeding reactions (chain reaction, C₄H₄ + H → i-C₄H₃ + H₂ and C₄H₄ + H → C₂H₂ + C₂H₃ and decomposition reactions of free radicals, i-C₄H₃ + M → C₄H₂ + H + M) were confirmed or estimated. © John Wiley & Sons, Inc.     

Density functional study of the sigma and pi bond activation at the Pd=X (X = Sn, Si, C) bonds of the (H2PC2H4PH2)Pd=XH2 complexes. Is the bond cleavage homolytic or heterolytic?

The mechanism for the activation of the sigma bonds, the O-H of H2O, C-H of CH4, and the H-H of H2, and the pi bonds, the C[triple bond]C of C2H2, C=C of C2H4, and the C=O of HCHO, at the Pd=X (X = Sn, Si, C) bonds of the model complexes (H2PC2H4PH2)Pd=XH2 5 has been theoretically investigated using a density functional method (B3LYP). The reaction is significantly affected by the electronic nature of the Pd=X bond, and the mechanism is changed depending on the atom X. The activation of the O-H bond with the lone pair electron is heterolytic at the Pd=X (X = Sn, Si) bonds, while it is homolytic at the Pd=C bond. The C-H and H-H bonds without the lone pair electron are also heterolytically activated at the Pd=X bonds independent of the atom X, where the hydrogen is extracted as a proton by the Pd atom in the case of X = Sn, Si and by the C atom in the case of X=C because the nucleophile is switched between the Pd and X atoms depending on the atom X. In contrast, the pi bond activation of C[triple bond]C and C=C at the Pd=Sn bond proceeds homolytically, and is accompanied by the rotation of the (H2PC2H4PH2)Pd group around the Pd-Sn axis to successfully complete the reaction by both the electron donation from the pi orbital to Sn p orbital and the back-donation from the Pd dpi orbital to the pi orbital. On the other hand, the activation of the C=O pi bond with the lone pair electron at the Pd=Sn bond has two reaction pathways: one is homolytic with the rotation of the (H2PC2H4PH2)Pd group and the other is heterolytic without the rotation. The role of the ligands controlling the activation mechanism, which is heterolytic or homolytic, is discussed.     

Solvent effect on protein binding by polymer brush grafted onto porous membranes

An epoxy-group-containing polymer chain was grafted onto the hollow-fiber form of a porous polyethylene membrane by the immersion of the electron beam-irradiated trunk polymer in glycidyl methacrylate diluted with methanol and 1-butanol. The epoxy group density ranged from 8.5 to 13.4 mol per kg of the trunk polymer. Subsequently, the epoxy groups produced were converted into sulfonic acid and diethylamino groups. The density of -SOH and -N(C2H5), groups was 0.40 and 2.2 mol per kg of the product. respectively. The polymer brush, defined as a polymer chain extending from the surface of a pore toward the interior of the pore, was evaluated from the determination of an equilibrium binding capacity of hen egg lysozyme (HEL) and bovine serum albumin (BSA). The polymer brush prepared in 1-butanol was found to be longer than that prepared in methanol from the determinations of liquid permeability and protein adsorptivity. The proteins were bound to the polymer brush prepared in 1-butanol, followed by the functionalization, at higher degrees of multilayer binding: about 30 for HEL and 6 for BSA.     

First example of chiral N-heterocyclic carbenes as catalysts for kinetic resolution

Chiral N-heterocyclic carbenes, which are derived from C2-symmetric 1,3-bis(1-arylethyl)imidazolium salts, catalyze enantioselective acylation of racemic secondary alcohols.     

Electronic structures of zinc and palladium tetraazaporphyrin derivatives controlled by fused benzo rings

Zinc and palladium tetracyclic aromatic complexes lying structurally between tetraazaporphyrin (TAP) and phthalocyanine (Pc), that is, monobenzo-, adjacently dibenzo-, oppositely dibenzo-, and tribenzo-fused TAPs, have been prepared, and their electronic structures investigated by electronic absorption, magnetic circular dichroism (MCD), fluorescence, phosphorescence, and time-resolved electron paramagnetic resonance (TREPR) spectroscopy, as well as cyclic voltammetry. The last-named indicated that the first oxidation potentials shift to more negative values with increasing number of the fused benzo rings, but also suggested that the first reduction potential apparently has no correlation with the size and symmetry of the pi-conjugated systems. However, this latter behavior is reasonably interpreted by the finding that the effect of the fused benzo rings on destabilization of the LUMO depends on the orbital to which they are fused (i.e., whether it is an egx or egy orbital), since the LUMOs of TAP complexes are degenerate with D4h symmetry. The energy splitting of the LUMOs, that is, DeltaLUMO, was evaluated experimentally for the first time by analyzing the relationship between the first reduction potential and the size and shape of the pi-conjugated system. Electronic absorption and MCD measurements indicate that the lowest excited singlet states are split in the case of the low-symmetry TAP derivatives, although these excited states are degenerate for Pc and TAP with D4h symmetry. These energy splittings DeltaE(SS) correlate well with the DeltaLUMO values. To investigate the electronic structures in the lowest excited triplet state, zero-field splitting (zfs) was analyzed by time-resolved EPR (TREPR) spectroscopy. The energy splitting in the lowest excited triplet state, DeltaE(TT) was quantitatively evaluated from the temperature dependence of the zfs or spin-orbit coupling of the Pd complexes. Consequently, it is demonstrated that DeltaLUMO, DeltaE(SS), and DeltaE(TT) values exhibiting a mutually good relationship can be determined experimentally.     

Ru3(CO)12-catalyzed silylation of benzylic C-H bonds in arylpyridines and arylpyrazoles with hydrosilanes via C-H bond cleavage

Ruthenium-catalyzed silylation of sp3 C-H bonds at a benzylic position with hydrosilanes gave benzylsilanes. For this silylation reaction, Ru3(CO)12 complex showed high catalytic activity. This silylation proceeded at the methyl C-H bond selectively. For this silylation reaction, pyridyl and pyrazolyl groups, and the imino group in hydrazones, can function as a directing group. Several hydrosilanes involving triethyl-, dimethylphenyl-, tert-butyldimethyl-, and triphenylsilanes can be used as a silylating reagent. Coordination of an sp2 nitrogen atom to the ruthenium complex is important for achieving this silylation reaction.     

Preparation of monodisperse SiO2 nanoparticles by membrane emulsification using ideally ordered anodic porous alumina

Monodisperse SiO2 particles of nanometer dimensions were fabricated by membrane emulsification using ideally ordered anodic porous alumina. For the preparation of monodisperse emulsion droplets, the dispersed phase was pressed through a porous alumina membrane into the continuous phase. After solidification treatment of the emulsion droplets, prepared spherical SiO2 nanoparticles with uniform sizes were obtained. From scanning electron microscope observation of the obtained particles, it was confirmed that the size distribution of SiO2 nanoparticles is relatively narrow.