Modern microscopy methods for the structural study of porous materials

This article describes a number of important recent microscopy tools and their application in particular to the study of porous inorganic materials. The authors believe that these new techniques are on the threshold of delivering enormous new power in the chemist's arsenal for understanding new and complex behaviour in multi-component, hierarchical or composite materials. In particular we consider the contribution of electron crystallography, three-dimensional electron tomography, ultra-high resolution scanning electron microscopy as well as the combined application of high-resolution electron microscopy and atomic force microscopy to the study of surfaces and crystal growth. Much of this work has taken on a particular significance owing to the ground breaking work of scientists at Mobil and in Japan 10 years ago in the successful synthesis of materials with porosity on many length scales achieved through the cooperative self-assembly between inorganic and organic phases. This resulted in a series of materials known as M41S of which MCM-41 and MCM-48 were two of the first and most important structures to be synthesised. This has led to a wealth of new porous structures with order over many length scales and has presented new problems in characterisation. Microscopy methods properly executed are particularly important in the study of this new class of material.     

Isolation of heptadepsin, a novel bacterial cyclic depsipeptide that inhibits lipopolysaccharide activity

Lipopolysaccharide (LPS) is considered to cause various inflammatory reactions. We searched among microbial secondary metabolites for compounds that could inhibit LPS-stimulated adhesion between human umbilical vein endothelial cells (HUVEC) and human myelocytic cell line HL-60 cells. In the course of our screening, we isolated a novel cyclic depsipeptide, which we named heptadepsin, from the whole culture broth of Paenibacillus sp. The addition of heptadepsin prior to LPS stimulation decreased HL-60 cell-HUVEC adhesion without showing any cytotoxicity. It also inhibited the cellular adhesion induced by lipid A, the active component of LPS, but it did not inhibit TNF-alpha or IL-1beta-induced cell adhesion. The result of surface plasmon resonance (SPR) analysis revealed that heptadepsin interacted with lipid A directly. Thus, heptadepsin, a novel naturally occurring cyclic heptadepsipeptide, was shown to inactivate LPS by direct interaction with LPS.     

Mono- and oligosaccharide sensing by phenylboronic acid-appended 5,15-bis(diarylethynyl)porphyrin complexes

Porphyrin derivatives bearing a pair of boronic acid groups (1, 1·Zn, and 1·Cu) were designed and synthesized from 2 to construct a saccharide sensing system. Compounds 1, 1·Zn, and 1·Cu have a diethynyl porphyrin rotational axis, which is expected to act as a saccharide-binding modulator. Saccharide binding studies were conducted by UV-vis, fluorescence, and circular dichroism (CD) spectroscopies. In a water-methanol 1:1 (v/v) mixed solvent, we have found that 1·Zn can bind mono- and oligosaccharides including Lewis oligosaccharides to produce 1:1 host-saccharide complexes with the association constants of 10²−10³ M⁻¹ range. This paper thus demonstrates a new principle to design a boronic acid-based saccharide receptor.     

High-resolution submicron patterning of self-assembled monolayers using a molecular fluorine laser at 157 nm

Using a molecular fluorine laser at 157 nm wavelength, submicron patterning of organosilane self-assembled monolayers (SAMs) is demonstrated utilizing mask-contact photolithography. An organosilane, namely, octadecyltrimethoxysilane [ODS, CH(3)(CH(2))(17)Si(OCH(3))(3)], SAM is chemisorbed onto Si substrates covered with a 2 nm thick oxide layer and subsequently patterned using the laser. The optical path of the laser beam and the photomask-sample space are evacuated and then backfilled and purged with nitrogen during laser firing. The resulting pattern is investigated using various measurement techniques. The scanning probe microscopy images show that patterns are transferred to the SAM-covered Si substrates and that 500 nm features are successfully photoprinted in this way.     

Control of charge-transfer-induced spin transition temperature on cobalt-iron Prussian blue analogues

The electronic and spin states of a series of Co-Fe Prussian blue analogues containing Na(+) ion in the lattice, Na(x)()Co(y)()Fe(CN)(6) x zH(2)O, strongly depended on the atomic composition ratio of Co to Fe (Co/Fe) and temperature. Compounds of Co/Fe = 1.5 and 1.15 consisted mostly of the Fe(III)(t(2g)(5)e(g)(0), LS, S = 1/2)-CN-Co(II)(t(2g)(5)e(g)(2), HS, S = 3/2) site and the Fe(II)(t(2g)(6)e(g)(0), LS, S = 0)-CN-Co(III)(t(2g)(6)e(g)(0), LS, S = 0) site, respectively, over the entire temperature region from 5 to 350 K. Conversely, compounds of Co/Fe = 1.37, 1.32, and 1.26 showed a change in their electronic and spin states depending on the temperature. These compounds consisted mainly of the Fe(III)-CN-Co(II) site (HT phase) around room temperature but turned to the state consisting mainly of the Fe(II)-CN-Co(III) site (LT phase) at low temperatures. This charge-transfer-induced spin transition (CTIST) phenomenon occurred reversibly with a large thermal hysteresis of about 40 K. The CTIST temperature (T(1/2) = (T(1/2) descending + T(1/2) ascending)/2) increased from 200 to 280 K with decreasing Co/Fe from 1.37 to 1.26. Furthermore, by light illumination at 5 K, the LT phase of compounds of Co/Fe = 1.37, 1.32, and 1.26 was converted to the HT phase, and the relaxation temperature from this photoproduced HT phase also strongly depended on the Co/Fe ratio; 145 K for Co/Fe = 1.37, 125 K for Co/Fe = 1.32, and 110 K for Co/Fe = 1.26. All these phenomena are explained by a simple model using potential energy curves of the LT and HT phases. The energy difference of two phases is determined by the ligand field strength around Co(II) ions, which can be controlled by Co/Fe.     

Synthesis and structural identification of a highly ordered mesoporous organosilica with large cagelike pores

Using 1,2-bis(trimethoxysilyl)ethane as organosiloxane precursor and a triblock copolymer surfactant, Pluronic F127, as template, a highly ordered mesoporous organosilica with large cagelike pores has been successfully synthesized. Its structure was resolved to be 3-D cubic Fmm by high-resolution transmission electron microscopy. The intergrowth of hexagonal close-packed and cubic close-packed phases was observed in this material. The effect of different siliceous precursors on the mesostructure was also investigated.     

The effect of the counteranion on the formation of mesoporous materials under the acidic synthesis process

The presence of various counteranions at the interfacial region of the silicate-surfactant mesophase introduces opportunities for manipulation of the phase structure. Well-ordered 3D-hexagonal P63/mmc, cubic Pmn, 2D-hexagonal p6mm, and cubic Iad mesoporous materials have been synthesized with the same surfactant, cetyltriethylammonium bromide, in the presence of various acids. The counteranions of acidic media have resulted in increasing the surfactant packing parameter g in the order SO42- < Cl- < Br- < NO3-, which leads to the different time course of formation of mesostructures. The effect of counteranions on the formation of mesostructures is explained in terms of not only the adsorption strength on the headgroups of the surfactant micelle but also the rate of silica condensation affecting the charge density matching between the surfactant and silica. It has been found that the mesophase is always transformed from the larger g parameter into the smaller one. The distinct morphologies of the 3D-hexagonal P63/mmc mesophases have been rationally explained by supposing this particular mesostructure. The cubic Iad phase has been first synthesized under acidic conditions.     

Perfluoroalkylation of alkynes with RfI(Ph)OSO2CF3

Perfluoroalkylation of alkynes with RfI(Ph)OSO₂CF₃ is described. This offers the first example of electrophilic perfluoroalkylation of alkynes.     

Photoinduced magnetization of the cyano-bridged 3d-4f heterobimetallic assembly Nd(DMF)(4)(H(2)O)(3)(micro-CN)Fe(CN)(5).H(2)O (DMF = N,N-dimethylformamide)

Photoinduced magnetization of the cyano-bridged 3d-4f heterobimetallic assembly Nd(DMF)4(H2O)3(mu-CN)Fe(CN)5.H2O (1) (DMF = N,N-dimethylformamide) is described in this paper. The chiMT values are enhanced by about 45% after UV light illumination in the temperature range of 5-50 K. We propose that UV light illumination induces a structural distortion in 1. This small structural change is propagated by molecular interactions in the inorganic network. Furthermore, the cooperativity resulting from the molecular interaction functions to increase the activation energy of the relaxation processes, which makes observation of the photoexcited state possible. The flexible network structure through the hydrogen bonds in 1 plays an essential role for the photoinduced phenomenon. This finding may open up a new domain for developing the molecule-based magnetic materials.     

Thermodynamic studies of clathrate hydrates

Thermodynamic studies of clathrate hydrates, mainly of structures I and II, are considered in this review which is based on 147 references. There are two main subjects. The first is the host lattice energy and the guest-host interaction energy, both of these quantities being related to the enthalpy of dissociation and composition of the hydrates. The second subject concerns orientational ordering phenomena occurring in both host and guest, as reflected in the low temperature heat capacity. The classical theoretical treatment of clathrate formation has been reconsidered on the basis of recent experimental results. Particular emphasis has been given to orientational ordering since this topic is undoubtedly central to clarifying the nature of clathrate hydrates.Ausgehend von 147 Literaturangaben wurden in diesem Review thermodynamische Untersuchungen von Klathrathydraten hauptsächlich der Struktur I und II betrachtet. Es gibt zwei Hauptaugenmerke. Als erstes die Wirtsgitterenergie und die Gast-Wirt-Wechselwirkungsenergie, beide bezogen auf die Dissoziationsenthalpie und die Bildungsenthalpie der Hydrate. Das zweite Hauptaugenmerk betrifft Orientierungs-Konditionierungserscheinungen sowohl in Wirt als auch Gast, wie in den Wärmekapazitäten bei niedrigen Temperaturen widergespiegelt wird. Auf der Basis jüngster experimenteller Ergebnisse wurde die klassische theoretische Betrachtung über die Bildung von Klathraten überprüft. Der Orientierung-Konditionierung wurde besonderer Nachdruck verliehen, da dies zweifellos eine entscheidende Rolle bei der Klärung der Natur der Klathrathydrate spielt. 147 I II. . «» « — », . «» « », . . , .

---

Contribution No. 155 from the Chemical Thermodynamics Laboratory.