Physicochemical characterization of degradable thermosensitive polymeric micelles

Amphiphilic AB block copolymers consisting of thermosensitive poly(N-(2-hydroxypropyl) methacrylamide lactate) and poly(ethylene glycol), pHPMAmDL-b-PEG, were synthesized via a macroinitiator route. Dynamic light scattering measurements showed that these block copolymers form polymeric micelles in water with a size of around 50 nm by heating of an aqueous polymer solution from below to above the critical micelle temperature (cmt). The critical micelle concentration as well as the cmt decreased with increasing pHPMAmDL block lengths, which can be attributed to the greater hydrophobicity of the thermosensitive block with increasing molecular weight. Cryogenic transmission electron microscopy analysis revealed that the micelles have a spherical shape with a narrow size distribution. 1H NMR measurements in D2O showed that the intensity of the peaks of the protons from the pHPMAmDL block significantly decreased above the cmt, indicating that the thermosensitive blocks indeed form the solidlike core of the micelles. Static light scattering measurements demonstrated that pHPMAmDL-b-PEG micelles with relatively large pHPMAmDL blocks possess a highly packed core that is stabilized by a dense layer of swollen PEG chains. FT-IR analysis indicated that dehydration of amide bonds in the pHPMAmDL block occurs when the polymer dissolved in water is heated from below to above its cmt. The micelles were stable when an aqueous solution of micelles was incubated at 37 degrees C and at pH 5.0, where the hydrolysis rate of lactate side groups is minimized. On the other hand, at pH 9.0, where hydrolysis of the lactic acid side groups occurs, the micelles started to swell after 1.5 h of incubation and complete dissolution of micelles was observed after 4 h as a result of hydrophilization of the thermosensitive block. Fluorescence spectroscopy measurements with pyrene loaded in the hydrophobic core of the micelles showed that when these micelles were incubated at pH 8.6 and at 37 degrees C the microenvironment of pyrene became increasingly hydrated in time during this swelling phase. The results demonstrate the potential applicability of pHPMAmDL-b-PEG block copolymer micelles for the controlled delivery of hydrophobic drugs.     

Dinitrogen formation by oxidative intramolecular N---N coupling in cis,cis-[(bpy)2(NH3)RuORu(NH3)(bpy)2]4+

The (15)N-labeled diammine(mu-oxo)ruthenium complex cis,cis-[(bpy)(2)(H(3)(15)N)Ru(III)ORu(III)((15)NH(3))(bpy)(2)](4+) ((2-(15)N)(4+)) was synthesized from cis,cis-[(bpy)(2)(H(2)O)Ru(III)ORu(III)(H(2)O)(bpy)(2)](4+) by using ((15)NH(4))(2)SO(4) and isolated as its perchlorate salt in 17% yield. A 1:1 mixture of (2-(15)N)(4+) and nonlabeled cis,cis-[(bpy)(2)(H(3)(14)N)Ru(III)ORu(III)((14)NH(3))(bpy)(2)](4+) were electrochemically oxidized in aqueous solution. The gaseous products (14)N(2) and (15)N(2) were formed in equimolar amounts with only a small amount of (14)N(15)N detected. This demonstrates that dinitrogen formation by oxidation of the diammine complex proceeds by intramolecular N---N coupling.     

Calorimetric study of the glassy state XII. Plural glass-transition phenomena of ethanol

Ethanol was found to give a metastable crystalline phase (crystal-II) when the liquid was cooled at a moderate rate. Glassy states of liquid and of newly found crystal-II were obtained in the calorimeter cell by controlling the cooling rate of the liquid. The heat capacities of these phases as well as that of the stable crystal-I were measured by an adiabatic calorimeter in the temperature range between 14 and 300 K. The glass transition temperature T_g, the heat-capacity jump at T_g, and the residual entropy were found to be 97 K, 35.3 J K^?1 mol^?1, and 8.93 J K^?1 mol^?1 for the glassy liquid, and 97 K, 22.8 J K^?1 mol^?1, and 4.24 J K^?1 mol^?1 for the glassy crystal-II, respectively. The values for the residual entropy are referred to the third-law entropy for crystal-I.The heat capacities reported previously for the supercooled liquid by Gibson et al. and by Parks and Kelley agree well with those for the metastable crystal-II. Those of the supercooled liquid connect smoothly with those obtained for the liquid above the melting temperature. Thus, ethanol is found to be another example of a low-molecular-weight compound which shows multiple glass-transition phenomena.     

Diastereoselective Iodocarbocyclization Reaction of 2- or 3-Oxy-4-pentenylmalonate Derivatives

1,2- Or 1,3-asymmetric induction in the iodocarbocyclization reaction of 4-pentenylmalonate derivatives having a stereogenic center at an allylic or a homoallylic position has been investigated. The iodocarbocyclization reactions of 3-oxy-4-pentenylmalonate derivatives proceeded with high cis-selectivity through stereoelectronic control of the oxygenated substituent at an allylic position. In the reaction of (S)-2-siloxy-4-pentenylmalonate, an excellent diastereoselectivity was achieved through the utilization of double stereodifferentiation with a chiral titanium catalyst. Furthermore, as an application of the present reaction, the asymmetric syntheses of cyclosarkomycin and a synthetic intermediate of brefeldin A from optically pure 2- and 3-oxy-4-pentenylmalonate derivatives are also described.     

Assembly of azido- or cyano-bridged binuclear complexes containing the bulky [Mn(phen)2]2+ building block: syntheses, crystal structures, and magnetic properties

Two new cyano-bridged heterobinuclear complexes, [Mn(II)(phen)2Cl][Fe(III)(bpb)(CN)2] x 0.5CH3CH2OH x 1.5H2O (1) and [Mn(II)(phen)2Cl][Cr(III)(bpb)(CN)2] x 2H2O (2) [phen = 1,10-phenanthroline; bpb(2-) = 1,2-bis(pyridine-2-carboxamido)benzenate], and four novel azido-bridged Mn(II) dimeric complexes, [Mn2(phen)4(mu(1,1)-N3)2][M(III)(bpb)(CN)2]2 x H2O [M = Fe (3), Cr (4), Co (5)] and [Mn2(phen)4(mu(1,3)-N3)(N3)2]BPh4 x 0.5H2O (6), have been synthesized and characterized by single-crystal X-ray diffraction analysis and magnetic studies. Complexes 1 and 2 comprise [Mn(phen)2Cl]+ and [M(bpb)(CN)2]- units connected by one cyano ligand of [M(bpb)(CN)2]-. Complexes 3-5 are doubly end-on (EO) azido-bridged Mn(II) binuclear complexes with two [M(bpb)(CN)2]- molecules acting as charge-compensating anions. However, the Mn(II) ions in complex 6 are linked by a single end-to-end (EE) azido bridging ligand with one large free BPh4(-) group as the charge-balancing anion. The magnetic coupling between Mn(II) and Fe(III) or Cr(III) in complexes 1 and 2 was found to be antiferromagnetic with J(MnFe) = -2.68(3) cm(-1) and J(MnCr) = -4.55(1) cm(-1) on the basis of the Hamiltonian H = -JS(Mn)S(M) (M = Fe or Cr). The magnetic interactions between two Mn(II) ions in 3-5 are ferromagnetic in nature with the magnetic coupling constants of 1.15(3), 1.05(2), and 1.27(2) cm(-1) (H = -JS(Mn1)S(Mn2)), respectively. The single EE azido-bridged dimeric complex 6 manifests antiferromagnetic interaction with J = -2.29(4) cm(-1) (H = -JS(Mn1)S(Mn2)). Magneto-structural correlationship on the EO azido-bridged Mn(II) dimers has been investigated.     

Nature of the active component in the catalytic system prepared from titanium(III) chloride(AA), ethylaluminum dichloride,and tetrakis(dimethylamino)silane,in the polymerization of propylene

The chemistry of the titanium(III) chloride(AA)–ethylaluminum dichloride–tetrakis-(dimethylamino)silane system for the polymerization of propylene was studied. A complex of ethylaluminum dichloride with tetrakis(dimethylamino)silane was isolated. It was shown that this complex contains ethylaluminum dichloride and tetrakis(dimethylamino)silane in the ratio of 2:1. This complex with titanium(III) chloride is responsible for the polymerization activity.     

Carburizing of titanium with plasma jets under reduced pressure

The carburizing of titanium with argon-methane (0.1%) and argon-methane (0.1%)-hydrogen (2%) plasma jets at a pressure of 200 Torr was studied. The carburizing of titanium was not successful with the argon-methane plasma jet because the specimen was covered with graphitic carbon. A hard and thick TiC layer was formed by the argon-methane-hydrogen plasma jet in a short time without the deposition of graphitic carbon. Emission spectra from the plasma jets show that the addition of hydrogen increases the amount of CH radicals as well as decreases the amount of C₂ and C in the plasma jet. The decrease of C₂ and C suppresses the deposition of graphitic carbon and enhances the TiC formation.Partly presented at Gordon Research Conference on Plasma Chemistry, August 11–15, 1986, Tilton, New Hampshire.     

A new family of small molecules to probe the reactivation of mutant p53

Cells that express mutant p53 derived from cancers are selectively killed by a new class of small organic molecules. The protein p53 is recognized as one of the most important guardians in the body that prevents tumor development. Mutant forms of p53 are present in approximately 50% of all human cancers. Molecules that selectively kill cells expressing mutant p53 could become important chemotherapeutic agents. Our research focuses on developing a synthetically accessible class of molecules that can be easily modified to examine structural activity relationships and mechanism of biological activity or to optimize for anticancer activity. In this communication, a new class of molecules that selectively arrests growth of cells expressing two forms of mutant p53 is described. Synthetic routes to these compounds are also presented.     

Modern microscopy methods for the structural study of porous materials

This article describes a number of important recent microscopy tools and their application in particular to the study of porous inorganic materials. The authors believe that these new techniques are on the threshold of delivering enormous new power in the chemist's arsenal for understanding new and complex behaviour in multi-component, hierarchical or composite materials. In particular we consider the contribution of electron crystallography, three-dimensional electron tomography, ultra-high resolution scanning electron microscopy as well as the combined application of high-resolution electron microscopy and atomic force microscopy to the study of surfaces and crystal growth. Much of this work has taken on a particular significance owing to the ground breaking work of scientists at Mobil and in Japan 10 years ago in the successful synthesis of materials with porosity on many length scales achieved through the cooperative self-assembly between inorganic and organic phases. This resulted in a series of materials known as M41S of which MCM-41 and MCM-48 were two of the first and most important structures to be synthesised. This has led to a wealth of new porous structures with order over many length scales and has presented new problems in characterisation. Microscopy methods properly executed are particularly important in the study of this new class of material.     

Isolation of heptadepsin, a novel bacterial cyclic depsipeptide that inhibits lipopolysaccharide activity

Lipopolysaccharide (LPS) is considered to cause various inflammatory reactions. We searched among microbial secondary metabolites for compounds that could inhibit LPS-stimulated adhesion between human umbilical vein endothelial cells (HUVEC) and human myelocytic cell line HL-60 cells. In the course of our screening, we isolated a novel cyclic depsipeptide, which we named heptadepsin, from the whole culture broth of Paenibacillus sp. The addition of heptadepsin prior to LPS stimulation decreased HL-60 cell-HUVEC adhesion without showing any cytotoxicity. It also inhibited the cellular adhesion induced by lipid A, the active component of LPS, but it did not inhibit TNF-alpha or IL-1beta-induced cell adhesion. The result of surface plasmon resonance (SPR) analysis revealed that heptadepsin interacted with lipid A directly. Thus, heptadepsin, a novel naturally occurring cyclic heptadepsipeptide, was shown to inactivate LPS by direct interaction with LPS.