Analytical effective width equations for limit state design of thin plates under non-homogeneous in-plane loading

The effective width concept has been widely used in engineering practice for the computation of ultimate strength of slender members. Many design codes employ this concept in order to compensate for the stiffness reduction in the post-buckling state. Extensive work was done to develop effective width equations for plates under uniform compression, while little attention has been given for plates under non-homogeneous in-plane loading. North American, British and European design codes provide only expressions for the computation of the elastic buckling loads for plates under this load combination, while the effective width calculation is based on the uniformly compressed plates. It will be shown that due to the non-uniformity of the applied load, the stress characteristics in the post-buckling state are different from the uniform compression case, thus requiring special treatments. The paper presents analytical closed form expressions for the computation of effective width of thin plates under non-homogeneous in-plane loading. The longitudinal edges are assumed to be straight and free to translate in the plane of the plate. The proposed expressions are very useful for limit state design of slender I-sections of beam columns or channel sections under this general type of loading. They enable the designers to compute the effective width of the section with the aid of simple formulas that, for design purposes, are suitable for hand-calculation and avoid the cost and effort that any numerical non-linear analysis may require.     

Thermally degradable maleimides for reworkable adhesives

New thermosetting materials were developed for reworkable adhesive applications by introducing acetal ester groups as thermally degradable linkages into maleimide compounds. The synthesis of compounds containing maleimide functionality and acetal ester linkages was conducted by a one‐step neat reaction from commercially available materials. The polymerization process and thermal degradation of the synthesized materials were studied. It was found that the acetal ester linkage degraded rapidly above 225 °C, and introduction of this linkage into the adhesive formulation led to improved reworkability of adhesively bonded substrates. A mechanism for reworkability was proposed based on the insight provided by experimental and modeling work. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1073–1084, 2009     

Efficient way for detection of alcohols using hollow core photonic crystal fiber sensor

Optical Review - In this study, a simple hollow core hexagonal structured photonic crystal fiber is offered and analyzed to discern commonly used different type of alcohols in our daily life. The...     

Demonstration of sufficient control for two rounds of quantum error correction in a solid state ensemble quantum information processor

We report the implementation of a 3-qubit quantum error-correction code on a quantum information processor realized by the magnetic resonance of carbon nuclei in a single crystal of malonic acid. The code corrects for phase errors induced on the qubits due to imperfect decoupling of the magnetic environment represented by nearby spins, as well as unwanted evolution under the internal Hamiltonian. We also experimentally demonstrate sufficiently high-fidelity control to implement two rounds of quantum error correction. This is a demonstration of state-of-the-art control in solid state nuclear magnetic resonance, a leading test bed for the implementation of quantum algorithms.     

Cost-effective modeling strategies for the analysis of spliced steel connections

The paper presents several cost-effective modeling strategies that can be used by structural engineers in practice to determine the stresses in the spliced members. The computational efficiency and the modeling effort required for the several modeling options are also discussed. The deformation mechanisms and load transfer for several types of connections are illustrated. Optimization techniques are also presented to economize the computer time for connections with large number of bolts. Results are presented to compare the accuracy of several modeling strategies commonly used in practice. It is shown that for eccentric connections, the flexural bending largely affect the maximum tensile and compressive stresses within the joint. The difference may reach up to 54%. Finally, Experimental comparisons are made with the numerical procedures for typical connection model.     

Reductive depolymerization of plastics catalyzed with transition metal complexes

1. Download : Download high-res image (257KB)
2. Download : Download full-size image

     

UV protection filters by dielectric multilayer thin films on Glass BK-7 and Infrasil 301

The increasing use of Ultraviolet (UV) light in medicine, industrial environments, for cosmetic use, and even in consumer products necessitates that greater attention be paid to the potential hazards of this type of electromagnetic radiation. To avoid any adverse effects of exposure to this type of radiation, four suitable protection filters were produced to block three UV bands (UVA, UVB, and UVC). The design structure of the required dielectric multilayer filters was done by optical thin film technology using the absorbing property of UV radiation for the substrates and dielectric materials. The computer analyses of the multilayer filter formulas were prepared using Macleod Software for the production processes. The deposition technique was achieved on optical substrates (Glass BK-7 and Infrasil 301) by dielectric material combinations including Titanium dioxide (Ti₂O₃), Hafnium dioxide (HfO₂), and Lima (mixture of oxides SiO₂/Al₂O₃); deposition being achieved using an electron beam gun. The output results of the theoretical and experimental transmittance values for spectral band from 200 nm to 800 nm were discussed in four processes. To analyze the suitability for use in ‘real world’ applications, the test pieces were subjected to the durability tests (adhesion, abrasion resistance, and humidity) according to Military Standard MIL-C-675C and MIL-C-48497A.     

Liquid-phase epitaxy of multicomponent layer-based porous coordination polymer thin films of [M(L)(P)0.5] type: importance of deposition sequence on the oriented growth

The progressive liquid-phase layer-by-layer (LbL) growth of anisotropic multicomponent layer-based porous coordination polymers (PCPs) of the general formula [M(L)(P)(0.5)] (M: Cu(2+), Zn(2+); L: dicarboxylate linker; P: dinitrogen pillar ligand) was investigated by using either pyridyl- or carboxyl-terminated self-assembled monolayers (SAMs) on gold substrates as templates. It was found that the deposition of smooth, highly crystalline, and oriented multilayer films of these PCPs depends on the conditions at the early growth cycles. In the case of a two-step process with an equimolar mixture of L and P, growth along the [001] direction is strongly preferred. However, employing a three-step scheme with full separation of all components allows deposition along the [100] direction on carboxyl-terminated SAMs. Interestingly, the growth of additional layers on top of previously grown oriented seeding layers proved to be insensitive to the particular growth scheme and full retention of the initial orientation, either along the [001] or [100] direction, was observed. This homo- and heteroepitaxial LbL growth allows full control over the orientation and the layer sequence, including introduction of functionalized linkers and pillars.     

A simple chemical model for clathrate hydrate inhibition by polyvinylcaprolactam

A dimeric model compound gives structural insight into the mode of interaction of low dosage hydrate inhibitors with water.