Investigating 2,2'-bipyridine-3,3'-diol as a microenvironment-sensitive probe: its binding to cyclodextrins and human serum albumin

The 2,2'-bipyridine-3,3'-diol molecule (BP(OH)2) was investigated as a potential photophysical probe in inclusion and biological studies. Binding of BP(OH)2 to cyclodextrins (CDs) and human serum albumin (HSA) was studied by following the changes in its absorption and fluorescence spectra. The stoichiometric ratios and binding constants of the complexes were deduced by fitting the changes in the spectral intensity to binding isotherms. The stoichiometric ratio in the BP(OH)2/(alpha-CD) complex is dominated by 1:2, whereas in all other CDs and in HSA this ratio is 1:1. The structure of the BP(OH)2:(alpha-CD)2 complex, calculated using ab initio methods, indicates that the inclusion of the BP(OH)2 molecule is axial and centered between the two cavities of alpha-CD with van der Waals and electrostatic interactions dominating the binding. Analysis of these results along with the inclusion results of BP(OH)2 in beta-CD, methyl-beta-CD, 2,6-di-O-methyl-beta-CD, and gamma-CD shows that absorption and fluorescence of BP(OH)2 are very sensitive to the change in the cavity size of CD and its hydrophobicity. This change is reflected in the form of a decrease in the intensity of the absorption peaks of the BP(OH)2/water complex in the region 400-450 nm and a red shift in the fluorescence peak as the cavity size decreases and its hydrophobicity increases. Binding of BP(OH)2 as a probe ligand to HSA, a prototype protein, reflects the hydrophobic interior of HSA in a similar manner. The spectral changes indicate that BP(OH)2 binds in the hydrophobic cavity of HSA's subdomain IIA. The results presented here show that BP(OH)2 can be used in binding sites and biological systems as a microenvironment-sensitive probe.     

Growth Mechanism of Metal–Organic Frameworks: Insights into the Nucleation by Employing a Step‐by‐Step Route

One step at a time : The in situ monitoring of the step‐by‐step formation of metal–organic frameworks (MOFs) by using surface plasmon resonance (SPR), allows the nucleation process and the formation of the secondary building units to be investigated. Growth rates on functionalized organic surfaces with different crystallographic orientations can also be studied.

     

Development of a gradient elution preparative high performance liquid chromatography method for the recovery of the antibiotic ertapenem from crystallization process streams

A gradient elution preparative chromatography method was developed for the recovery of the antibiotic ertapenem from crystallization mother-liquor streams. The preparative HPLC method that was developed on the lab-scale employs an analytical size column of conventional dimensions (25 cm x 0.46 cm) packed with Kromasil C8 stationary phase. Gradient elution was used with aqueous acetic acid and acetonitrile as mobile phases. A target of processing approximately 30 mg of ertapenem per half an hour at a flow rate of 1.5 mL/min with high yield and adequate rejection of all major impurities was achieved. This corresponds to a productivity of approximately 0.6 kg ertapenem as free acid per kilogram of stationary phase per day (kkd). The scalability of the method was demonstrated by using a 5 cm i.d. column configuration to generate 10 g of purified ertapenem. This work complements a previous study improving on the productivity and throughput of the method by employing gradient elution and the use of crystallization to remove some key impurities that are chromatographically difficult to resolve [A. Vailaya, P. Sajonz, O. Sudah, V. Capodanno, R. Helmy, F.D. Antia, J. Chromatogr. A 1079 (2005) 80].     

1H-1,2,3-triazole,a promising precursor for chemical vapor deposition of hydrogenated carbon nitride

Well-crystallized hydrogenated carbon nitride thin films have been prepared by microwave plasma enhanced chemical vapor deposition (MWPECVD). 1H-1,2,3-triazole+N₂ and Si (1 0 0) were used as precursor and substrate, respectively. Substrate temperature during the deposition was recorded to be 850 °C. The synthesized samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and X-ray photo-electron spectroscopy (XPS) analyses. The plasma compositions were checked by optical emission spectroscopy (OES). XRD observation strongly suggests that the films contain polycrystalline carbon nitride with graphitic structure of (1 0 0), (0 0 2), (2 0 0) and (0 0 4). XPS peak quantification reveals that the atomic ratio of the materials C:N:O:Si is 32:41:18:9. X-ray photo-electron peak deconvolution shows that the most dominant peak of C (1s) and N (1s) narrow scans correspond to sp² hybrid structure of C₃N₄. These observations indicate that 1H-1,2,3-triazole favors the formation of hydrogenated carbon nitride with graphitic phase by CVD method and thus is in good agreement with XRD results. SEM of surface and OES of plasma also support the formation of polycrystalline carbon nitride films from 1H-1,2,3-triazole+N₂ by CVD.     

Stress field characteristics of eccentrically loaded aircraft spliced joints

The paper details the stress characteristics in eccentrically loaded aircraft spliced joints. It is shown that the hoop stress (σ_θθ) around each rivet is characterized by two peak values located at θ = (0°, 90°). The magnitude of (σ_θθ) is then reduced to a minimum value between these two peaks. A sharp increase in the axial stress component (σ_xx) along the vertical splice lines occurs in the vicinity of the rivet centerlines followed by a rapid decrease in the areas between the rivets. It is shown that stresses along the first interior rivet row is the most critical. The axial stress (σ_xx) profile along horizontal rivet lines has a “sinusoidal” pattern. It is observed that the transverse stress profile (σ_yy), along the horizontal lines, has different peak and minimum values between the rivets. The magnitude of the peak/minimum values depends upon the line location within the splice region. It is also shown the bending stress component varies significantly and must be accounted for the analysis of the eccentric aircraft joints. Experimental comparisons are made along several lines in the splice region. The numerical model is utilized for analysis of a full frame-bay/splice of aircraft fuselage. The paper provides valuable information that can be utilized by practicing engineers for analysis and design of joints with large number of rivets.     

Redox mediation enabled by immobilised centres in the pores of a metal-organic framework grown by liquid phase epitaxy

A layer of a metal-organic framework (SURMOF) was prepared on a thiol monolayer on Au. Charge transport across the insulating membrane could be established by using ferrocene as an immobilised redox mediator. Reversibility of the immobilisation and its role in the electrode kinetics are discussed.     

Cost-effective modeling strategies for the analysis of spliced steel connections

The paper presents several cost-effective modeling strategies that can be used by structural engineers in practice to determine the stresses in the spliced members. The computational efficiency and the modeling effort required for the several modeling options are also discussed. The deformation mechanisms and load transfer for several types of connections are illustrated. Optimization techniques are also presented to economize the computer time for connections with large number of bolts. Results are presented to compare the accuracy of several modeling strategies commonly used in practice. It is shown that for eccentric connections, the flexural bending largely affect the maximum tensile and compressive stresses within the joint. The difference may reach up to 54%. Finally, Experimental comparisons are made with the numerical procedures for typical connection model.     

An MCl inf4 p2− moiety (M = copper,zinc, cadmium and mercury) stabilized by bis(ethylenediamine)copper(II) cation

Summary New ionic bimetallic complexes of the type [Cu(en)₂]-[MCl₄], where M = Cu^II, Zn^II, Cd^II and Hg^II, were prepared by reacting bis(ethylenediamine)copper(II) dichloride (1 mol) with copper, zinc, cadmium and mercury dichlorides (1 mol) in absolute alcohol. Elemental analyses, conductivity and magnetic susceptibility measurements, and spectroscopic data (such as i.r., u.v.-vis. and e.p.r.) confirm that the compounds are 22 electrolytes in MeOH and that the copper(II) ion is paramagnetic, maintaining its square-planar geometry, while metal ions in the anionic moiety of the complexes achieve their usual tetrahedral environment. An augmented magnetic moment has been observed in the [Cu(en)₂] [CuCl₄] complex, which is attributed to the ferromagnetic effect and TIP.Author to whom all correspondence should be directed.     

Phytochemical Analysis,Pharmacological and Safety Evaluations of Halophytic Plant,Salsola cyclophylla

Salsola cyclophylla, an edible halophyte, is traditionally used for inflammation and pain. To confirm the claimed anti-inflammatory and analgesic properties, a detailed study on respective pharmacological actions was undertaken. The activities are contemplated to arise from its phytoconstituents. The LC-MS analysis of S. cyclophylla 95% aqueous-ethanolic extract revealed the presence of 52 compounds belonging to phenols, flavonoids, coumarins, and aliphatics class. A high concentration of Mn, Fe, and Zn was detected by atomic absorption spectroscopic analysis. The ethyl acetate extract showed the highest flavonoid contents (5.94 ± 0.04 mg/g, Quercetin Equivalents) and Fe2⁺-chelation (52%) potential with DPPH radicals-quenching IC₅₀ at 1.35 ± 0.16 mg/mL, while the aqueous ethanolic extract exhibited maximum phenolics contents (136.08 ± 0.12 mg/g, gallic acid equivalents) with DPPH scavenging potential at IC₅₀ 0.615 ± 0.06 mg/mL. Aqueous ethanolic extract and standard quercetin DPPH radicals scavenging’s were equal potent at 10 mg/mL concentrations. The aqueous ethanolic extract showed highest analgesic effect with pain reduction rates 89.86% (p = 0.03), 87.50% (p < 0.01), and 99.66% (p = 0.0004) after 60, 90, and 120 min, respectively. Additionally, aqueous ethanolic extract exhibited the highest anti-inflammation capacity at 41.07% (p < 0.0001), 34.51% (p < 0.0001), and 24.82% (p < 0.0001) after 2, 3, and 6 h of extract’s administration, respectively. The phytochemical constituents, significant anti-oxidant potential, remarkable analgesic, and anti-inflammatory bioactivities of extracts supported the traditionally claimed anti-inflammatory and analgesic plant activities.     

Exploiting pH mismatch in preparative high-performance liquid chromatographic recovery of ertapenem from mother liquor streams

Preparative chromatography was successfully employed to recover ertapenem from mother liquor streams. The recovery process involved concentration of mother liquor stream by evaporation, purification by reversed-phase preparative high-performance liquid chromatography (HPLC), and removal of chromatographic solvents in the recovered fractions by evaporation. HPLC feed was prepared by stripping off the organic solvents from the mother liquor using a wiped-film evaporator. Purification was first carried out on a 25 cm x 0.46 cm analytical column packed with 10-microm Kromasil C8 particles and then scaled up to a 25 cm x 5 cm preparative column. Gram-level recovery of ertapenem with high purity was achieved by exploiting a novel approach based on pH mismatch between the feed and the eluent. Purified ertapenem streams from preparative HPLC runs were combined, evaporated and recycled into the crystallizer for ertapenem isolation.