Violation of isotopic invariance in strong interactions and mass spectrum of the 1/2+ baryon octet

The ideas developed by Gell-Mann and Okubo in studying violation of unitary symmetry are used to describe violation of isototic invariance in strong interactions. The present consideration is performed for the example of the mass spectrum of the octet formed by baryons of spin-parity 1/2⁺: only for this family are the widths of its particles much less than the scale of the effects being investigated, their masses being known from experiments to a fairly high precision. The Gell-Mann-Okubo formula is generalized in such a way that relations both for the splitting between the isomultiplets of the octet and for the mass splitting within these isomultiplets follow from the new formula. Moreover, a relation between masses that describes their electromagnetic splitting and which coincides in form with the Coleman-Glashow relation also follows from this formula. The relations obtained for the masses of the baryons belonging to the octet in question are satisfied to a precision not poorer than 3%.     

Compatible Dubrovin–Novikov Hamiltonian Operators,Lie Derivative,and Integrable Systems of Hydrodynamic Type [Erratum]

Correction to the paper published in Vol. 133, No. 2, November, 2002.     

N2O emission in the 4.5 μM region: high excitation of the bending mode transitions v1v2v3→v1v2(v3−1) with (2v1+v2)=5

Eight emission spectra of pure N₂O and N₂O + N₂ + He mixtures excited by a radio frequency discharge were recorded by Fourier Transform Spectroscopy at a resolution of 0.005 and 0.004 cm⁻¹ in the 4.5 μm region. Results (wavenumbers, band centers, and spectroscopic constants) concerning nine new vibrational transitions which have not been observed before, and which occur between highly excited levels of the bending mode are reported. The derived spectroscopic parameters allow us to reproduce the experimental wavenumbers with an RMS error lower than 4.5 × 10⁻⁴ cm⁻¹.     

Magnetic structure of the interface between ferromagnet and antiferromagnet with parallel anisotropy axes

The structure of a spin spiral arising in the vicinity of the interface between a ferromagnet and a compensated antiferromagnet is studied in the case where the anisotropy axes of the layers are parallel to each other, and the evolution of this spiral in an external magnetic field is investigated.     

Synthesis and antibacterial activities of water‐soluble methacrylate polymers containing quaternary ammonium compounds

New water‐soluble methacrylate polymers with pendant quaternary ammonium (QA) groups were synthesized and used as antibacterial materials. The polymers with pendant QA groups were obtained by the reaction of the alkyl halide groups of a previously synthesized functional methacrylate homopolymer with various tertiary alkyl amines containing 12‐, 14‐, or 16‐carbon alkyl chains. The structures of the functional polymer and the polymers with QA groups were confirmed with Fourier transform infrared and ¹H and ¹³C NMR. The degree of conversion of alkyl halides to QA sites in each polymer was determined by ¹H NMR to be over 90% in all cases. The number‐average molecular weight and polydispersity of the functional polymer were determined by size exclusion chromatography to be 32,500 g/mol and 2.25, respectively. All polymers were thermally stable up to 180 °C according to thermogravimetric analysis. The antibacterial activities of the polymers with pendant QA groups against Staphylococcus aureus and Escherichia coli were determined with broth‐dilution and spread‐plate methods. All the polymers showed excellent antibacterial activities in the range of 32–256 μg/mL. The antibacterial activity against S. aureus increased with an increase in the alkyl chain length for the ammonium groups, whereas the antibacterial activity against E. coli decreased with increasing alkyl chain length. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5965–5973, 2006     

Synthesis of A2B star block copolymers from a heterotrifunctional initiator

We described the obtention of A₂B star block copolymers through the use of a new heterotrifunctional initiator. That way, well‐defined (PCL)₂‐arm‐PtBuMA and (PCL)₂‐arm‐PS star block copolymers have been synthesized from a heterotrifunctional initiator bearing two hydroxyl groups able to initiate ROP of CL (with AlEt₃ or Sn(Oct)₂ as coinitiator) and a bromide function able to initiate ATRP of tBuMA or styrene. Firstly, we have proceeded using a sequential process (two‐steps), leading to an intermediate macroinitiator. Secondly, attempt to polymerize these two monomers in a simultaneous process (one‐step), that is directly from the mixture of monomers, initiator, coinitiators, and solvent, has been realized and has shown that some interferences between the two polymerizations occurred, leading to an inhibition of ATRP when Sn(Oct)₂ was used and an unexpected increase in control when AlEt₃ was used as catalyst for the ROP (obtention of well‐defined (PCL)₂‐arm‐PtBuMA with pdi of 1.18). © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1796–1806, 2006     

Synthesis of poly(vinyl chloride)‐b‐poly(n‐butyl acrylate)‐b‐poly(vinyl chloride) by the competitive single‐electron‐transfer/degenerative‐chain‐transfer‐mediated living radical polymerization in water

The synthesis of a block copolymer poly(vinyl chloride)‐b‐poly(n‐butyl acrylate)‐b‐poly(vinyl chloride) is reported. This new material was synthesized by single‐electron‐transfer/degenerative‐chain‐transfer‐mediated living radical polymerization (SET‐DTLRP) in two steps. First, a bifunctional macroinitiator of α,ω‐di(iodo)poly (butyl acrylate) [α,ω‐di(iodo)PBA] was synthesized by SET‐DTLRP in water at 25 °C. The macroinitiator was further reinitiated by SET‐DTLRP, leading to the formation of the desired product. This ABA block copolymer was synthesized with high initiator efficiency. The kinetics of the copolymerization reaction was studied for two PBA macroinitiators with number–average molecular weight of 10 k and 20 k. The relationship between the conversion and the number–average molecular weight was found to be linear. The dynamic mechanical thermal analysis suggests just one phase, indicating that copolymer behaves as a single material with no phase separation. This methodology provides the access to several block copolymers and other complex architectures that result from combinations of thermoplastics (PVC) and elastomers (PBA). From industrial standpoint, this process is attractive, because of easy experimental setup and the environmental friendly reaction medium. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3001–3008, 2006     

Single electron transfer–degenerative chain transfer living radical polymerization of N‐butyl acrylate catalyzed by Na2S2O4 in water media

Living radical polymerization of n‐butyl acrylate was achieved by single electron transfer/degenerative‐chain transfer mediated living radical polymerization in water catalyzed by sodium dithionate. The plots of number–average molecular weight versus conversion and ln[M]₀/[M] versus time are linear, indicating a controlled polymerization. This methodology leads to the preparation of α,ω‐di(iodo) poly (butyl acrylate) (α,ω‐di(iodo)PBA) macroinitiators. The influence of polymerization degree ([monomer]/[initiator]), amount of catalyst, concentration of suspending agents and temperature were studied. The molecular weight distributions were determined using a combination of three detectors (TriSEC): right‐angle light scattering (RALLS), a differential viscometer (DV), and refractive index (RI). The methodology studied in this work represents a possible route to prepare well‐tailored macromolecules made of butyl acrylate in an environmental friendly reaction medium. Moreover, such materials can be subsequently functionalized leading to the formation of different block copolymers of composition ABA. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2809–2825, 2006     

Electrochemical determination of minoxidil in different pharmaceutical formulations by flow injection analysis.

The electrochemical behavior and amperometric-FIA quantification of minoxidil at a glassy carbon electrode is described. The procedure is based on electrochemical oxidation at 0.800 V (vs. Ag/AgCl/NaCl(3 M) in a phosphate buffer solution. Minoxidil was determined over the range 1 x 10(-7) - 1 x 10(-4) M. Different analytical parameters and electrode stability were analyzed to obtain the best electrode performance. The optimal conditions were: working potentials, 0.800 V; flow rate, 0.74 mL min(-1); and solution pH 7.0. This system allowed a sampling rate of 120 samples per hour without any pretreatment. The proposed method was used for minoxidil quantification in pharmaceutical preparations with satisfactory results. The accuracy of FIA-amperometric method was established by a comparison with the conventional UV determination technique using a paired t-test indicating the absence of systematic errors.