Determination of naturally occurring radionuclides in ultrapure organic liquids

For the determination of trace elements in organic liquids radiochemical neutron activation analysis has been combined with counting methods geared to various decay modes of indicator radionuclides leading to a high sensitivity required for ultrapure samples. The activation parameters such as irradiation time, sample mass and neutron flux have been enlarged to the maximum possible in the available irradiation facility. Separation yields and adsorption losses have been studied in detail for a set of elements in order to rule out losses during the separation process. The attainable limits of detection are 2 · 10^–16g/g for U and Lu, in the 5 · 10^–15g/g range for Th and Sm, in the 1 · 10^–14g/g region for La, 5 · 10^–13g/g for Rb, Cd and 2 · 10^–12g/g for K and In. Although the analysis focused on traces of naturally occurring radioisotopes, results for Cr, Fe, W and Zn are presented as well.     

Alternative procedure for the purification of the heat-stable enterotoxin of enterotoxigenic Escherichia coli pathogenic for calves

A method for purification of the heat-stable enterotoxin (ST) of enterotoxigenic Escherichia coli (ETEC) strains (C1444 and B41) pathogenic for calves and some physiochemical properties of the ST are described. The method involved ultrafiltration on PM-10 and UM-2 Diaflo membranes, acetone fractionation, ion-exchange chromatography on AG 1-X2, chromatofocusing and a combination of hydrophobic interaction chromatography on octyl-Sepharose CL-4B and gel-permeation on Bio-Gel P-2. Polyacrylamide gel electrophoresis in sodium dodecyl sulphate of fluorescamine-labeled purified, reduced and alkylated ST preparations revealed a single band with approximate molecular masses of 2500 and 2200 for the C1444 and B41 STs, respectively. For the C1444 ST, the final purification achieved was approximately 27,000-fold on the basis of absorbance at 280 nm per mouse effective dose. However, it was 2000-fold when calculated on the basis of mg protein per effective dose (5 ng). Amino acid composition of the C1444 ST was found to be different from that of the B41 ST suggesting that the ST produced by bovine isolates may be heterogeneous in their structure.     

Thermodynamic characteristics of the behaviour of higher aliphatic amines on selected cellulose sorbents

Thermodynamic characteristics of the behaviour of higher aliphatic amines on chromatographic paper and cellulose powder are presented. A new method is described aiming to eliminate systematic error, connected with the visualization of the chromatographic spots on the investigated sorbents.     

Synthesis and molecular structure of a substituted 8-oxa-10-azatricyclo [7.3.1.0]tridecatetraene

10,11-Dimethyl-9-(coumarin-3 -yl)-12-ethoxycarbonyl-8-oxa-10-azatricyclo[7,3,1.0^2.7]trideca-2,4,6-11-tetraene was isolated from the mixture of products from the condensation of salicyl aldehyde with acetoacetic ester and methylamine. Its molecular structure has been established by x-ray crystallography.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 2, pp. 259–264, February, 1996.     

Extraction—photometric determination of trace amounts of nitrite in waters

Traces of nitrite in river water can be determined by extraction spectrophotometry. Nitrite in 100 ml of sample water at pH 1.5–3.0 diazotizes p-aminoacetophenone, which is then coupled with m-phenylenediamine at the same pH. The 2,4-diamino-4'-acetyl-azobenzene formed is extracted into 5 or 10 ml of toluene at pH 9 and the absorbance is measured at 450 nm. The molar absorptivity is about 2.3·lO⁴ l mol^?1 cm^?1. The ions normally present in river water do not interfere. The nitrite contents in river waters in Okayama Prefecture, Japan, are 1–30 P.P.b.     

A simple and regioselective α-bromination of alkyl aromatic compounds by two-phase electrolysis

Electrochemical bromination of toluene and substituted toluenes by two-phase electrolysis yields the corresponding α-brominated products. The reaction has been carried out in a single compartment cell with platinum electrodes at 0 °C in chloroform using an aqueous sodium bromide solution (60%) containing a catalytic amount of HBr. Two-phase electrolysis results in high yields (60-95%) of monobromo compounds with very high regioselectivity (>95%).     

Concerted cycloaddition of chlorosulfonyl isocyanate to α-pinene stepwise rearrangement of the β-lactam cycloadduct to a γ-lactam

Chlorosulfonyl isocyanate adds to α-pinene in concerted fashion to give the unrearranged N-chlorosulfonyl-β-lactam 2 (75%). Thermolysis of cycloadduct 2 affords the rearranged N-chlorosulfonyl-γ-lactam 6 (60%) via a sequence of transient carbonium ions (45). Reductive hydrolysis of 2 and 6 gave, respectively, the NH-β-lactam 3 (70%) and the NH-γ-lactam 7 (70%). Proof of structure of the rearranged γ-lactams 6 and 7 are provided, respectively, by X-ray crystallographic analysis and the application of the Eu(dpm)₃ NMR shift reagent.     

Spectroscopy in separated flames-II The use of the separated air-acetylene flame in long path atomic absorption spectroscopy

The application of a separated air-acetylene flame to the determination of several elements by long-path atomic-absorption spectroscopy is described. The factors which govern the stability and reproducibility of the separated flame have been investigated. High sensitivity and stability and low background absorption are obtained in the the determination of zinc, iron, copper, mercury, magnesium and silver by the method described.     

Properties of Some Chitosan-containing Blends and Films Therefrom

Mixed solutions of chitosan and polymers with different chain rigidities (polyvinyl alcohol and methyl cellulose) in 2% acetic acid, at various component ratios, were studied viscometrically. The compatibility of the components in solutions and in the solid phase was assessed, and the mechanical characteristics of films prepared from these blends were determined.     

Transformations of 2-methylthiacyclobutane in the presence of aluminum oxide

The transformations of 2-methylthiacyclobutane at 150–350 °C in the presence of -Al₂O₃ samples with different aprotic acidities were investigated. It was established that the sulfide undergoes isomerization via two pathways, viz., with ring expansion to a five-membered ring and with opening at one C—S bond to give an unsaturated thiol. An experimental confirmation of the consecutive formation of hydrogen sulfide from a one-ring sulfide through a step involving the formation of an unsaturated thiol was obtained for the first time. The transformations are realized as a result of both ionic and polymerization-depolymerization processes.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 2, pp. 184–187, February, 1982.