The kinetics of methane ignition in fuel-rich HCCI engines: DME replacement by ozone

Fuel-rich combustion of methane in a homogeneous-charge compression-ignition (HCCI) engine can be used as a polygeneration process producing work, heat, and useful chemicals like syngas. Due to the inertness of methane, additives such as dimethyl ether (DME) are needed to achieve ignition at moderate inlet temperatures and to control combustion phasing. Because significant concentrations of DME are then needed, a considerable part of the fuel energy comes from DME. An alternative ignition promotor known from fuel-lean HCCI is ozone (O₃). Here, a combined experimental and modelling study on the ignition of fuel-rich partial oxidation of methane/air mixtures at Φ = 1.9 with ozone and DME as additives in an HCCI engine is conducted. Experimental results show that ozone is a suitable additive for fuel-rich HCCI, with only 75 ppm ozone reducing the fuel-fraction of DME needed from 11.0% to 5.3%. Since ozone does not survive until the end of the compression stroke, the reaction paths are analyzed in a single-zone model. The simulation shows that different ignition precursors or buffer molecules are formed, depending on the additives. If only DME is added, hydrogen peroxide (H₂O₂) and formaldehyde (CH₂O) are the most important intermediates, leading to OH formation and ignition around top dead center (TDC). With ozone addition, methyl hydroperoxide (CH₃OOH) becomes very important earlier in the compression stroke under these fuel-rich conditions. It is then later converted to CH₂O and H₂O₂. Thus, ozone is a very effective additive not only for fuel-lean, but also for fuel-rich combustion. However, the mechanism differs between both regimes. Because less of the expensive additives are needed, ozone could help improving the economics of a polygeneration process with fuel-rich operated HCCI engines.     

The symmetrical porphyrazine with annulated six membered rings

Tetrakis(cyclohexylpyrazino)porphyrazinato magnesium(II) with annulated six membered rings has been prepared by two different methods. In Method A: cyclotetramerization of 2,3-dicyano-5,6-cyclohexanopyrazine (1) in the presence of Mg(OPr)₂ in n-propanol afforded the tetrakis(cyclohexylpyrazino)porphyrazinato magnesium(II) (2). In Method B: selenodiazole rings on the periphery of tetrakis(selenodiazole)porphyrazinato magnesium(II) were opened by the action of H₂S to yield the vicinal diamino functionalities. The ring closure of the vicinal diamino groups with 1,2-cyclohexanedione afforded the tetrakis(cyclohexylpyrazino) porphyrazinato magnesium(II) (2).     

Fourier optics analysis of grating sensors with tilt errors

Dynamic diffraction gratings can be microfabricated with precision and offer extremely sensitive displacement measurements and light intensity modulation. The effect of pure translation of the moving part of the grating on diffracted order intensities is well known. This study focuses on the parameters that limit the intensity and the contrast of the interference. The effects of grating duty cycle, mirror reflectivities, sensor tilt and detector size are investigated using Fourier optics theory and Gaussian beam optics. Analytical findings reveal that fringe visibility becomes <0.3 when the optical path variation exceeds half the wavelength within the grating interferometer. The fringe visibility can be compensated by monitoring the interfering portion of the diffracted order light only through detector size reduction in the expense of optical power. Experiments were conducted with a grating interferometer that resulted in an eightfold increase in fringe visibility with reduced detector size, which is in agreement with theory. Findings show that diffraction grating readout principle is not limited to translating sensors but also can be used for sensors with tilt or other deflection modes.     

Spectral amplitude and phase measurement of ultrafast pulses using all-optical differential tomography

We demonstrate a simple, all-optical, fiber-based method for characterizing the spectral amplitude and phase of ultrafast pulses using a differential tomographic measurement realized via four-wave mixing. The technique is applied to subpicosecond pulses in the C-band of the telecommunication spectrum. Characterization of amplified pulses and propagation through dispersive media is demonstrated and compared with autocorrelation measurements and calculated predictions. We show how our approach can be extended to larger bandwidths in similar systems, extending tomographic reconstruction of coherent fields to nearly an octave of bandwidth while maintaining a robust, waveguide-based geometry.     

Surface charging at the (1 0 0) surface of Cu doped and undoped Li2B4O7

We have compared the photovoltaic charging of the (1 0 0) surface termination for Cu doped and undoped Li₂B₄O₇. While the surface charging at the (1 0 0) surface of Li₂B₄O₇ is significantly greater than observed at (1 1 0) surface, the Cu doping plays a role in reducing the surface photovoltage effects. With Cu doping of Li₂B₄O₇, the surface photovoltaic charging is much diminished at the (1 0 0) surface. The density of states observed with combined photoemission and inverse photoemission remains similar to that observed for the undoped material, except in the vicinity of the conduction band edge.     

Selling to the “Newsvendor” with a forecast update: Analysis of a dual purchase contract

We consider a supply chain in which a manufacturer sells to a procure-to-stock retailer facing a newsvendor problem with a forecast update. Under a wholesale price contract, the retailer waits as long as she can and optimally places her order after observing the forecast update. We show that the retailer’s wait-and-decide strategy, induced by the wholesale price contract, hinders the manufacturer’s ability to (1) set the wholesale price and maximize his profit, (2) hedge against excess inventory risk, and (3) reduce his profit uncertainty. To mitigate the adverse effect of wholesale price contract, we propose the dual purchase contract, through which the manufacturer provides a discount for orders placed before the forecast update. We characterize how and when a dual purchase contract creates strict Pareto improvement over a wholesale price contract. To do so, we establish the retailer’s optimal ordering policy and the manufacturer’s optimal pricing and production policies. We show how the dual purchase contract reduces profit variability and how it can be used as a risk hedging tool for a risk averse manufacturer. Through a numerical study, we provide additional managerial insights and show, for example, that market uncertainty is a key factor that defines when the dual purchase contract provides strict Pareto improvement over the wholesale price contract.     

High density cationic polymer brushes from combined “click chemistry” and RAFT‐mediated polymerization

A simple method for preparing cationic poly[(ar‐vinylbenzyl)trimethylammonium chloride)] [poly(VBTAC)] brushes was used by combined technology of “click chemistry” and reversible addition‐fragmentation chain transfer (RAFT) polymerization. Initially, silicon surfaces were modified with RAFT chain transfer agent by using a click reaction involving an azide‐modified silicon wafer and alkyne‐terminated 4‐cyanopentanoic acid dithiobenzoate (CPAD). A series of poly(VBTAC) brushes on silicon surface with different molecular weights, thicknesses, and grafting densities were then synthesized by RAFT‐mediated polymerization from the surface immobilized CPAD. The immobilization of CPAD on the silicon wafer and the subsequent polymer formation were characterized by X‐ray photoelectron spectroscopy, water contact angle measurements, grazing angle‐Fourier transform infrared spectroscopy, atomic force microscopy, and ellipsometry analysis. The addition of free CPAD was required for the formation of well‐defined polymer brushes, which subsequently resulted in the presence of free polymer chains in solution. The free polymer chains were isolated and used to estimate the molecular weights and polydispersity index of chains attached to the surface. In addition, by varying the polymerization time, we were able to obtain poly(VBTAC) brushes with grafting density up to 0.78 chains/nm² with homogeneous distributions of apparent needle‐like structures. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

CHEMICAL INVESTIGATIONS ON SOME HYPERICUM SPECIES GROWING IN TURKEY-I

The chemical composition of five taxa of the genusHypericumL. obtained from herbarium specimens has been investigated.Namely, H. adenotrichum Spach(endemic),H. calycinumL.,H. cerastoides(Spach) Robson,H. montbretiiSpach, andH. perforatumL. were subjected to microdistillation to isolate the volatile compounds, which were analyzed by GC/MS.