Particle packed columns and monolithic columns in high-performance liquid chromatography-comparison and critical appraisal

The review highlights the fundamentals and the most prominent achievements in the field of high-performance liquid chromatography (HPLC) column development over a period of nearly 50 years. After a short introduction on the structure and function of HPLC columns, the first part treats the major steps and processes in the manufacture of a particle packed column: synthesis and control of particle morphology, sizing and size analysis, packing procedures and performance characterization. The next section is devoted to three subjects, which reflect the recent development and the main future directions of packed columns: minimum particle size of packing, totally porous vs. core/shell particles and column miniaturization. In the last section an analysis is given on an alternative to packed columns-monolithic columns, which have gained considerable attraction. The challenges are: improved packing design based on modeling and simulation for targeted applications, and enhanced robustness and reproducibility of monolithic columns. In the field of miniaturization, particularly in chip-based nano-LC systems, monoliths offer a great potential for the separation of complex mixtures e.g. in life science.     

Development of undersized (12.5 mm diameter) low‐dilution glass beads for X‐ray fluorescence determination of 34 components in 200 mg of igneous rock for applications with geochemical and archeological silicic samples

A low‐dilution, undersized (12.5 mm diameter) glass–bead technique was developed for X‐ray fluorescence determination of 34 components (Na₂O, MgO, Al₂O₃, SiO₂, P₂O₅, K₂O, CaO, TiO₂, MnO, Fe₂O₃, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Cs, Ba, La, Pr, Nd, Sm, Gd, Dy, Er, Yb, Hf, W, and Pb) in precious silicic samples for geochemistry and archeology. This preparation was consolidated based on the properties of the specimen, including disk formability and detachability from a small crucible, through variation of the amounts of the two samples (basaltic and granitic rocks) and releasing reagent. The specimen was prepared by fusing a mixture of 200 mg of powdered sample, 200 mg of lithium tetraborate as a flux, and 60 µl of 18.42 mass% lithium chloride solution as a releasing agent in a small platinum crucible. Calibration curves were drawn using synthetic calibration standards, which were prepared by compounding chemical reagents, such as oxides, carbonates, and diphosphates containing analytes. The calibration curves showed good linearity with correlation coefficient values greater than 0.990. Using the proposed method, we determined 34 components in five igneous rock reference samples. The results were in agreement with the recommended values, accounting for uncertainties. With this method, preparation requires only small amounts of the powdered sample and alkali flux; however, still allowing for determination of many analytes, which is advantageous when dealing with limited quantities of precious samples. The present method has potential applications in the chemical characterization of various geological and archeological samples. Copyright © 2015 John Wiley & Sons, Ltd.     

Quantitative determination of BMS-378806 in human plasma and urine by high-performance liquid chromatography/tandem mass spectrometry

BMS-378806 is a human immunodeficiency virus (HIV) entry inhibitor that is being developed for the oral treatment of HIV infection. Human plasma and urine LC/MS/ MS methods have been developed and validated for the quantitation of BMS-378806. For human plasma method, methyl t-butyl ether was used to extract BMS-378806 from plasma in a 96-well format, and the organic layers were dried down and then reconstituted for the injection, while a dilute-and-shoot approach was used for human urine method in a 96-well format. Chromatographic separation was achieved isocratically on a Phenomenex C18 (2) Luna column (2 x 50 mm2, 5 microm). The mobile phase contained 60:40 v/v of 0.1% formic acid in water and ACN. Detection was by positive ion electrospray MS/MS. The standard curves ranged from 1.25 to 1000 ng/mL for the plasma assay and from 10 to 5000 ng/mL for the urine assay. The curves were fitted to a 1/x2 weighted quadratic regression model for both methods. The validation results demonstrated that both methods had satisfactory precision and accuracy across the calibration ranges. The methods were applied to the analysis of human plasma and urine samples from a single ascending dose clinical study to assess the pharmacokinetics of the drug. The pharmacokinetic analysis results indicated the absorption and disposition of the drug was rapid. The systemic exposure of BMS-378806 was generally dose proportional among the doses from 100 to 1200 mg, but not dose proportional to 1600 mg. There were modest increases in the systemic exposure when the drug was given with food or given as a solution formulation. Renal excretion was not a substantial elimination pathway of the drug. BMS378806 was safe and well tolerated over a dose range of 100-1600 mg administered as a single oral dose.     

Structure-based engineering of strictosidine synthase: auxiliary for alkaloid libraries

The highly substrate-specific strictosidine synthase (EC 4.3.3.2) catalyzes the biological Pictet-Spengler condensation between tryptamine and secologanin, leading to the synthesis of about 2000 monoterpenoid indole alkaloids in higher plants. The crystal structure of Rauvolfia serpentina strictosidine synthase (STR1) in complex with strictosidine has been elucidated here, allowing the rational site-directed mutation of the active center of STR1 and resulting in modulation of its substrate acceptance. Here, we report on the rational redesign of STR1 by generation of a Val208Ala mutant, further describing the influence on substrate acceptance and the enzyme-catalyzed synthesis of 10-methyl- and 10-methoxystrictosidines. Based on the addition of strictosidine to a crude strictosidine glucosidase preparation from Catharanthus cells, a combined chemoenzymatic approach to generating large alkaloid libraries for future pharmacological screenings is presented.     

Pore structural characterization of monolithic silica columns by inverse size-exclusion chromatography

In this work, a parallel pore model (PPM) and a pore network model (PNM) are developed to provide a state-of-art method for the calculation of several characteristic pore structural parameters from inverse size-exclusion chromatography (ISEC) experiments. The proposed PPM and PNM could be applicable to both monoliths and columns packed with porous particles. The PPM and PNM proposed in this work are able to predict the existence of the second inflection point in the experimental exclusion curve that has been observed for monolithic materials by accounting for volume partitioning of the polymer standards in the macropores of the column. The appearance and prominence of the second inflection point in the exclusion curve is determined to depend strongly on the void fraction of the macropores (flow-through pores), (b) the nominal diameter of the macropores, and (c) the radius of gyration of the largest polymer standard employed in the determination of the experimental ISEC exclusion curve. The conditions that dictate the appearance and prominence of the second inflection point in the exclusion curve are presented. The proposed models are applied to experimentally measured ISEC exclusion curves of six silica monoliths having different macropore and mesopore diameters. The PPM and PNM proposed in this work are able to determine the void fractions of the macropores and silica skeleton, the pore connectivity of the mesopores, as well as the pore number distribution (PND) and pore volume distribution (PVD) of the mesopores. The results indicate that the mesoporous structure of all materials studied is well connected as evidenced by the similarities between the PVDs calculated with the PPM and the PNM, and by the high pore connectivity values obtained from the PNM. Due to the fact that the proposed models can predict the existence of the second inflection point in the exclusion curves, the proposed models could be more applicable than other models for ISEC characterization of chromatographic columns with small diameter macropores (interstitial pores) and/or large macropore (interstitial pore) void fractions. It should be noted that the PNM can always be applied without the use of the PPM, since the PPM is an idealization that considers an infinitely connected porous medium and for materials having a low (<6) pore connectivity the PPM would force the PVD to a lower average diameter and larger distribution width as opposed to properly accounting for the network effects present in the real porous medium.     

X-ray photoelectron spectroscopy and near-edge X-ray-absorption fine structure of C60 polymer films

We report core-level and valence-band X-ray photoelectron spectroscopy (XPS) and carbon [ _]K near-edge X-ray-absorptionfine structure spectroscopy (NEXAFS) results of plasma-polymerized C₆₀. In comparison with evaporated C₆₀ the C 1s peak is broader and asymmetric for the C₆₀ polymer and its shake-up satellites diminished. Furthermore, the features of the valence-band as well as the features of the π^* antibonding orbitals of the C₆₀ polymer are broader and reduced in intensity. Changes in the electronic structure are attributed to the polymerization of C₆₀, the post-plasma functionalization of the surface by oxygen after exposure to atmosphere, and the occurrence of amorphous carbon. Received: 28 May 1999 / Accepted: 31 August 1999 / Published online: 8 March 2000     

Contact Transform for the Biharmonic Equation Applicable to Plane Stress Elastoplastic Elliptical Hole Problems

An analytical technique is developed that reduces the unknown elastic-plastic boundary of a linear elastic-perfectly plastic material containing an elliptical hole under tensile plane stress loading conditions into an equivalent mathematical problem with known boundaries. This mathematical transformation may facilitate this problem’s solution by either analytical or numerical means. Yield is assumed to occur in this analysis under the Tresca yield criterion. An example elastic-plastic problem illustrating this method is drawn from existing literature in the form of a perturbation solution for an elliptical hole derived by a series expansion about a circular boundary.     

Adsorbents and columns in analytical high-performance liquid chromatography: a perspective with regard to development and understanding

A brief historical survey is presented on the evaluation of silica adsorbents in analytical HPLC. The theory of analytical HPLC is mostly still being based on the height equivalent to a theoretical plate concept and the van Deemter equation that was derived from gas phase adsorption involving a linear adsorption isotherm and fast mass transfer kinetics. One can obviously wonder whether the use of the van Deemter equation is relevant and valid for the evaluation of the performance of HPLC systems, where most often the liquid solutes involve charged molecules in electrolytes and in very many cases the adsorbates are macromolecules having diffusion coefficients of small magnitude. Instead of the van Deemter equation, a multi-scale modelling approach that involves microscopic and macroscopic dynamic non-linear mass-transfer-rate models should be employed. Furthermore, advanced experimental methods for the characterisation of porous media and the distribution of the density of immobilised active sites (e.g., ligands) on surfaces as well as microscopic pore-network modelling and molecular dynamics modelling and simulation methods could be used for the design of novel adsorbents whose porous structures and immobilised active sites would provide effective mass transport and adsorption rates for realising efficient separations as well as high dynamic capacities when larger throughputs are required.     

Intermixed terpyridine-functionalized monolayers on gold: nonlinear relationship between terpyridyl density and metal ion coordination properties

Aiming at the functionalization of surfaces with terpyridine anchors for the coordinative deposition of additional layers, mixed self-assembled monolayers (SAMs) were prepared from binary solutions of 12-(2,2':6',2″-terpyridine-4'-yl)dodecane-1-thiol (TDT) and 1-decanethiol (DT). The SAMs and the order of the constituting molecules were analyzed by X-ray photoelectron spectroscopy (XPS), near-edge X-ray absorption fine structure spectroscopy (NEXAFS), and time-of-flight-secondary ion mass spectrometry (ToF-SIMS). The composition of the (TDT/DT)-SAMs and with it the surface density of terpyridyl groups correlates linearly with the relative concentrations of the two compounds in the solution used for depositing them. In marked contrast, the amount of terpyridine-coordinated Pd(II) ions significantly deviates from this trend with an optimum at a 1:3 ratio of TDT/DT. This indicates a major fraction of the terpyridines in TDT-rich SAMs not to be accessible for Pd(II) ion coordination. In agreement, NEXAFS spectroscopy reveals the alkyl backbones in TDT-rich SAMs not to be ordered, while they are preferentially upright oriented in the optimal 1:3-(TDT/DT)-SAMs. We interpret this in terms of terpyridine backfolding in TDT-rich SAMs, while they are located in accessible positions on top of the SAM in the 1:3-(TDT/DT)-SAM. While the alkyl backbones in the 1:3-(TDT/DT)-SAM are ordered, NEXAFS spectroscopy shows the terpyridyl groups not to have a preferential orientation in this SAM and thus retain enough flexibility to adjust to molecules that are deposited on top of the mixed SAM. In conclusion, the novel SAM does not undergo phase separation and consists predominantly of intermixed phases with adjustable surface density of quite flexible terpyridine anchor groups. The terpyridine-Pd(II) anchors are not only available for a future deposition of the next layer, but the metal ions also represent a sensitive probe for the accessibility of the terpyridyl groups.     

Successive coordination of palladium(II)-ions and terpyridine-ligands to a pyridyl-terminated self-assembled monolayer on gold

The deposition of palladium on a novel, reversibly protonatable, pyridyl-terminated self-assembled monolayer on gold substrates has been studied by X-ray photoelectron spectroscopy (XPS), near-edge X-ray absorption fine structure spectroscopy (NEXAFS spectroscopy) and time of flight-secondary ion mass spectrometry (ToF-SIMS). For this purpose, 12-(pyridin-4-yl)dodecane-1-thiol, consisting of a surface-active head group, an unfunctionalized hydrocarbon backbone and a terminal pyridyl group, has been synthesized and deposited on gold surfaces. Coordination of Pd(II) ions to the pyridyl group was examined. Furthermore, a reversible protonation/deprotonation cycle has been applied, and the relation between protonation and the amount of complexed palladium was studied. Investigation of the SAM by angle-resolved NEXAFS spectroscopy revealed the aliphatic backbone to be preferentially upright oriented with the aromatic head group being not preferentially oriented. The palladium layer was further coordinated with a CF₃-labeled terpyridine ligand in order to prove the accessibility of the Pd(II) ions to further complexation and the platform useful for deposition of further layers toward a multi-layered system.