One-pot syntheses of 2,6-diiododiaryl ethers from <Emphasis Type="Italic">para</Emphasis>-EWG-substituted phenols by diacetoxyiodobenzene

2,6-Diiododiaryl ethers are not only useful blocks to construct substituted diaryl ethers but are also characteristic drug precursors. In this research, a one-pot tandem oxidation of phenols substituted with electron-withdrawing group at the para position by excess diacetoxyiodobenzene is proven as a novel and efficient method for preparing 2,6-diiododiaryl ethers. Using this method, three new 2,6-diiododiaryl ethers, namely, methyl 3,5-diiodo-2-methoxy-4-phenoxybenzoate (2), methyl 3,5-diiodo-4-phenoxybenzoate (6), and 1-(2,6-diiodo-4-nitrophenoxy)benzene (7) were readily obtained from the corresponding phenols, and the yields were good.     

Dimethyl carbonate synthesis via transesterification of ethylene carbonate and methanol using ionic liquid catalysts immobilized on mesoporous cellular foams

Dimethyl carbonate (DMC) was synthesized via transesterification of ethylene carbonate and methanol with ionic liquid catalysts. For this reaction, 1,4-diazobicyclo[2.2.2]octane (DABCO), [Choline]OH, and [BMIM]Cl were used as a homogeneous catalyst, and hydrotalcite, [DABCO]OH@MCF, [DABCO]Cl@MCF, and DABCO/MCF were used as a heterogeneous catalyst. To support the ionic liquids, mesoporous cellular foam (MCF) was prepared and characterized by SEM, TEM and BET surface area analyzer. The average cell and window sizes of the prepared MCF were 34.4 and 21.3 nm, respectively. The prepared MCF had a well structured three-dimensional structure. Among the homogeneous catalysts used, DABCO showed the highest DMC yield about 84 %, and among the heterogeneous catalysts, [DABCO]OH@MCF showed the highest DMC yield about 77 %. In the reusability test of the used catalysts, there was only 8 % point decrease in DMC yield with [DABCO]OH@MCF, whereas 58 percent point decrease in DMC yield with DABCO/MCF after four times recycling tests. The effects of an anion on the catalytic activity were investigated. The optimum reaction condition for DMC synthesis was also investigated with [DABCO]OH@MCF catalyst.     

Development of mesoporous ZSM-12 zeolite and its application in alkylation of 2-methylnaphthalene

Desilicated MTW zeolite was evaluated in methylation of 2-methylnaphthalene (2-MN) in a fixed-bed flow reactor at 450 °C. Mesoporous MTW was fabricated via a microwave-assisted desilication process using a harsh alkaline solution to improve the pore volume and the surface area. H-ZSM-12 zeolite was treated with 0.3 M of NaOH solution with different treatment times. Due to the harsh alkaline treatment, micropores were blocked by the deposition of the removed atoms. Due to the importance of methylnaphthalenes intermediates, modified MTW zeolites were evaluated in methylation of 2-MN. Methanol (MeOH), 2-MN and 1,3,5-trimethylbenzene (TMB) were fed to the reactor with a molar ratio of 15:15:70. Higher selectivity to 1-methylnaphthalene (1-MN) was observed rather than dimethylnaphthalene and trimethylnaphthalene with a yield of 13.6, 8 and 2.5 mol%, respectively. Moderate conversion up to 24.1 mol% was reached for 30 min reaction.     

Precipitation of mixed Ca–Ba,Ca–Cd and Ca–Mn carbonates with distinct morphologies under cooperativity of divalent metal ions and protein

According to the basic principles of biomineralization, a homogeneous precipitation process involving BSA as the matrix was used to precipitate mixed Ca–Ba, Ca–Cd and Ca–Mn carbonate particles with distinct morphologies and structures at room temperature. The structures and morphologies of these carbonates were investigated using SEM and XRD. It was found that there were distinct differences when two different kinds of divalent metal ions were simultaneously precipitated in the reacting solutions. Moreover, according to the results of FT-IR and TG-DTA, we could conclude that bovine serum albumin also affected the diverse morphologies of Ca–M carbonates besides the influence of divalent metal ions. A self-assembly process coupled with an Ostwald ripening mechanism was also discussed based on a series of time-dependent SEM observations.     

Microstructure of SiO<Subscript>2</Subscript>/TiO<Subscript>2</Subscript> hybrid electrospun nanofibers and their application in dye degradation

SiO₂/TiO₂ hybrid nanofibers were prepared by electrospinning and applied for photocatalytic degradation of methylene blue (MB). The phase structure, specific surface area, and surface morphologies of the SiO₂/TiO₂ hybrid nanofibers were characterized through thermogravimetry (TG), X-ray diffraction (XRD) analysis, Brunauer–Emmett–Teller (BET) analysis, scanning electron microscopy (SEM), etc. XRD measurements indicated that doping of silica into TiO₂ nanofibers can delay the phase transition from anatase to rutile and decrease the grain size. SEM and BET characterization proved that silica doping can remarkably enhance the porosity of the SiO₂/TiO₂ hybrid nanofibers. The MB adsorption capacity and photocatalytic activity of the SiO₂/TiO₂ hybrid nanofibers were distinguished experimentally. It was found that, although increased silica doping content could enhance the MB adsorption capacity, the intrinsic photocatalytic activity gradually dropped. The SiO₂ (10 %)/TiO₂ composite nanofibers exhibited the highest MB degradation rate, being superior to SiO₂ (20 %)/TiO₂ or pure TiO₂.     

Efficient and selective oxidation of alcohols with <Emphasis Type="Italic">tert</Emphasis>-BuOOH catalyzed by a dioxomolybdenum(VI) Schiff base complex under organic solvent-free conditions

The catalytic activity of dioxidobis{2-[(E)-p-tolyliminomethyl]phenolato}molybdenum(VI) complex was studied, for the first time, in the selective oxidation of various primary and secondary alcohols using tert-BuOOH as oxidant under organic solvent-free conditions at room temperature. The effect of different solvents was studied in the oxidation of benzyl alcohol in this catalytic system. It was found that, under organic solvent-free conditions, the catalyst oxidized various primary and secondary alcohols to their corresponding aldehyde or ketone derivatives with high yield. The effects of other parameters such as oxidant and amount of catalyst were also investigated. Among different oxidants such as H₂O₂, NaIO₄, tert-BuOOH, and H₂O₂/urea, tert-BuOOH was selected as oxygen donor in the oxidation of benzyl alcohol. Also, it was found that oxidation of benzyl alcohol required 0.02 mmol catalyst for completion. Dioxomolybdenum(VI) Schiff base complex exhibited good catalytic activity in the oxidation of alcohols with tert-BuOOH under mild conditions. In this catalytic system, different primary alcohols gave the corresponding aldehydes in good yields without further oxidation to carboxylic acids.     

Charge separation by tetrahexahedron-SrTiO<Subscript>3</Subscript>/TiO<Subscript>2</Subscript> heterojunction as an efficient photocatalyst

Charge separation plays a key role in the conversion of solar energy into chemical energy for use in the redox reaction and as well as in the photocatalytic activity. In this study, SrTiO₃ particles with different morphologies including irregular, tetrahexahedron, and cube were synthesized by an in situ solvothermal method. The photocatalytic activity of the synthesized nanoparticles was investigated in the photocatalytic decomposition of methylene blue under UV light irradiation. Tetrahexahedron SrTiO₃ particles exhibited high decomposition activity (70 %), which is about two times higher than those of the irregular and cubic SrTiO₃ particles. The high decomposition activity of tetrahexahedron SrTiO₃ particles could be attributed to the improvement of charge separation achieved on different crystal facets. To reach a good charge separation, tetrahexahedron SrTiO₃/TiO₂ coupled nanoparticles were fabricated by impregnation method. Results showed that coupling tetrahexahedron SrTiO₃ with TiO₂ could produce efficient charge separation between tetrahexahedron SrTiO₃ and TiO₂ due to their matched band edges. In order to achieve better charge separation, the tetrahexahedron SrTiO₃/90 %TiO₂ sample was calcined at different temperatures in the 450–750 °C range. Tetrahexahedron SrTiO₃/90 %TiO₂ coupled nanoparticles calcined at 650 °C show high photocatalytic activity compared with other samples. The prepared samples were characterized by using various techniques such as X-ray diffraction, scanning electron microscopy, photoluminescence emission spectra, and UV–Vis diffuse reflectance spectroscopy.