Ein weiterer Beitrag zum Scandiumdicarbidproblem

Zusammenfassung Die bei 1850, 2000 bzw. 2300°C durch die Reduktion von Scandiumoxid mittels Kohlenstoff in dem der Scandiumdicarbidbildung entsprechenden Molverhältnis hergestellten Produkte wurden mit Wasser zersetzt und mit Hilfe der gleichzeitigen gaschromatographischen und massenspektrometrischen Analyse untersucht. Aus den Ergebnissen geht hervor, daß bei der Scandiumdicarbidbildung gleichzeitig ein weiteres Scandiumcarbid, höchstwahrscheinlich ein Sesquicarbid, entsteht.

---

Scandium(III) dicarbide problem. Further experimental results

Products obtained by the reduction of Sc₂O₃ with carbon at 1850, 2000 and 2300°C, resp., in the molar ratio corresponding to the scandium dicarbide were hydrolysed with water. Gaseous reaction products were analysed using gas chromatography combined with mass spectrometry. Results show, that during dicarbide formation another scandium carbide, probably sesquicarbide, is also formed.

---

---

Herrn Prof. Dr.H. Nowotny gewidmet.

---

7. Mitt.: Coll. Czech. Chem. Commun., im Druck.     

Sol-Gel Fabrication and Properties of Silica Cores of Optical Fibers Doped with Yb3+, Er3+, Al2 O3 or TiO2

Optical cores of preforms for drawing optical fibers doped with Er3+ and Yb3+ were fabricated by the sol-gel method with the aim of increasing the thickness of glass layers coated in a single coating cycle and to determine the relation between the preparation conditions and optical properties of the fibers. Al2O3-P2O5-SiO2 and TiO2-P2O5-SiO2 glasses have been studied as matrices for entrapping the rare-earth elements. Input sols have been prepared from silicon and titanium alkoxides, AlCl3, ErCl3, YbCl3, POCl3, water and a modifier under acidic catalysis of HCl. The sols were coated on the inner wall of a silica substrate tube and the gel layers were sintered at high temperatures up to 2000°C after which the tube was collapsed into the preform. Continuous and homogenous glass films with the maximum thickness of about 8 m were fabricated. The influence of high-temperature heat treatment of the layers on their composition and optical attenuation was observed. The amplified stimulated emission of Er3+ around 1.55 m was measured under the excitation of the fibers by an Nd : YAG laser at 1.064 m.     

Reduced Overlap Population Analysis for Triosmium Clusters

The use of reduced overlap population (ROP) analysis from EHMO calculations as a means to gauge the presence of metal–metal bonds in triosmium clusters is examined. A number of triosmium clusters containing bridging ligands have been used as test cases, including the bis-ethoxy bridged cluster Os₃(μ-OEt)₂(CO)₁₀, 1b, and some of its group 15 derivatives Os₃(μ-OEt)₂(CO)₉(EPh₃), 2. These latter clusters are newly synthesized and have been characterized completely, including by single-crystal X-ray crystallographic studies. In honour of Professor Dieter Fenske on his 65th birthday.     

The complexation efficiency

Studies have shown that cyclodextrins form both inclusion and non-inclusion complexes and that several different types of complexes can coexist in aqueous solutions. In addition, both cyclodextrins and cyclodextrin complexes are known to form aggregates and it is thought that these aggregates are able to solubilize drugs through micellar-type mechanism. Thus, stability constants determined from phase-solubility profiles are rarely true stability constants for of some specific drug/cyclodextrin complexes. A more precise method for evaluation of the solubilizing effects of cyclodextrins is to determine their complexation efficiency (CE). CE can be determined by measuring the solubility of a given drug at 2–3 cyclodextrin concentrations in pure water or a medium constituting the pharmaceutical formulation such as parenteral solution or aqueous eye drop formulation. Based on the CE value the drug:cyclodextrin ratio in the complexation medium can be determined as well as the increase in the formulation bulk in a solid dosage form. Determination of CE is a simple method for quick evaluating the solubilizing effects of different cyclodextrins and/or the effects of excipients on the solubilization. Here we report the CE of 43 different drugs with mainly 2-hydroxypropyl-β-cyclodextrin but also with randomly methylated β-cyclodextrin as well as few other cyclodextrins. Calculation of CE, drug:cyclodextrin molar ratio and the increase in the formulation bulk is discussed, as well as the influence of the intrinsic solubility and drug lipophilicity on the CE.     

Hydrogen–hydrogen bonding in biphenyl revisited

The evidence for the stabilizing nature of the H–H bonding in planar biphenyl is succinctly reviewed. The stabilizing nature of the H–H bonding is revealed through a comparison of the atomic energy of every atom in planar biphenyl with the same atom in the twisted equilibrium structure. It is shown that the barrier to rotation via the planar transition state is the net resultant of a stabilisation of the four ortho-hydrogen atoms (by 8 kcal/mol each), a stabilisation of the two para-carbon atoms (by 3 kcal/mol each) and by the dominant destabilisation of the two carbon atoms joining the two rings—the two junction carbon atoms—(by 22 kcal/mol each). The energetic stabilisation of the four ortho-hydrogen atoms is further shown to be in large proportion due to the formation of the hydrogen–hydrogen interatomic surface. Furthermore, neither the “bond order” between the two junction carbon atoms nor the total electron delocalisation between the two rings exhibit a significant change in going from the planar to the twisted equilibrium geometry. These findings are in contrast with the classical view of a balance between “steric non-bonded repulsion” and better electron delocalisation as a function of the twist dihedral angle. Similar conclusions have been recently reached by Pacios and Gómez through a study of the electrostatic potential at the position of the hydrogen nuclei. We dedicate this article to Professor TM Krygowski on the occasion of his 70th birthday wishing him a long and productive life.     

Electrochemical investigation of hymecromone at a multi-wall carbon nano-tube/cetyl pyridine bromine composite film electrode

A multi-wall carbon nanotube (MWNT)/cetyl pyridine bromine (CPB) composite film modified glassy carbon electrode (GCE) was developed for the electrochemical determination of hymecromone in phosphonate buffer. Electrochemical behaviour of hymecromone at the composite film electrode was investigated with voltammetry. Compared with an irreversible oxidation of hymecromone at the bare GCE, the oxidation peak current was enhanced greatly at the film electrode. Some parameters such as pH, scan rate, accumulation potential and accumulation time were optimized. Under optimal conditions, an oxidation peak at 0.82 V was employed to determine hymecromone electrochemically. A linearity between the oxidation peak current and the hymecromone concentration was obtained in the range of 3.0 × 10⁻⁷ − 2.0 × 10⁻⁵ mol 1⁻¹ with a detection limit of 8.0 × 10⁻⁸ mol 1⁻¹. The proposed procedure was successfully applied to assay hymecromone in pharmaceutical formulation with satisfactory results. The text was submitted by the authors in English.     

Synthesis and mechanism research of an ethylene glycol-based sol-gel method for preparing PZT nanopowders

Lead zirconate titanate nanopowders Pb(Zr_0.52Ti_0.48)O₃ (PZT) were prepared by modified sol-gel process in ethylene glycol system with zirconium nitrate as the zirconium source. The research showed that it was critical to add lead acetate after the reaction of zirconium nitrate and tetrabutyl titanate in ethylene glycol system for preparing PZT of exact titanium content. The reaction mechanisms of the sol synthesis, preparation of xerogel and agglutinating process were characterized through using FT-IR, NMR, TG-FTIR, and GC-MS. The experiment proved that ethylene glycol system did not rely on hydrolysis and condensation reactions in the process of the sol formation, but on the formation of chain or network large molecules from complexation of ethylene glycol and all Ti and minor Pd, Zr. In the preparation of xerogel, the complexation reaction was so completed that it formed large molecules network composed of metal and dioxyethyl. Bulk weight loss happened before 350°C in the process of sintering xerogel to prepare PZT nanopowders. Volatile matters and vapor phase decomposition resultants were primarily oxy-compounds including ethylene glycol, aldehyde-ketone compounds, carbon dioxide and nitrate radical conversion matters. After 350°C, primary vapor phase decomposition resultants were carbon dioxide and minor carbonyl compound.     

Core-valence correlation potentials based on density functional theory. Applications to valence-electron-only calculations on Na and K diatomics

The core-valence correlation potential has been derived for Na and K employing atomic calculations which make use of the density functional formula worked out by Lee, Yang and Parr based on Colle-Salvetti approach. The numerical potential is fitted with a small number of Gaussians leading to a very simple expression for an one-electron corevalence correlation operator? _cv . The core-valence correlation corrections can be computed by applying? _cv on a quite general class of wavefunctions. Applications of the? _cv operator within the framework of valence-electron-only calculations using effective Hamiltonians are presented for Na and K atoms, for Na₂, K₂, NaK and their cations. Almost all the corrections calculated for the physical properties due to the core-valence correlation lead to results which are in good agreement with those obtained from much more sophisticated treatments and experimental data.     

Two novel four-coordinated zinc(II) complexes [Zn(dmatrz)<Subscript>2</Subscript>Cl<Subscript>2</Subscript>] and [Zn(dmatrz)<Subscript>2</Subscript>(SCN)<Subscript>2</Subscript>] exhibiting strong blue fluorescent properties

Two novel complexes, [Zn(dmatrz)₂]Cl₂ (1) and [Zn(dmatrz)₂(SCN)₂] (2), have been prepared and characterized by X-ray crystallography, absorption and luminescence spectrometries (dmatrz=3,5-dimethy-4-amino-1,2,4-triazole). The coordination environment of the zinc(II) ions in (1) and (2) has a distorted tetrahedral geometry completed via two independent nitrogen atoms of two triazole ligands and two anions, respectively. Both (1) and (2) show strong blue luminescence properties. Furthermore, (1) displays stronger blue photoluminescence than (2) as the result of different anions (Cl^- and SCN^-) coordinated to the zinc(II) ions.     

Hydrogen peroxide oxidation of di(hydroxo)platinum(II) species in carboxylic acids

A facile procedure for synthesizing the mono(hydroxo)tris(carboxylato)platinum(IV) species has been achieved. The reaction of [Pt^II(OH)₂(dmpda)] (dmpda=2,2-dimethyl-1,3-propanediamine) with a 30% aqueous solution of H₂O₂ in the presence of a carboxylic acid produces a stable [Pt^IV(OOCR)₃(OH)(dmpda)] (R=Me, Et) complex in high yield. The crystal structures of [Pt^IV(OOCMe)₃(OH)(dmpda)] . H₂O (triclinic P1 bar, a=8.761(2) Å, b=9.245(3) Å, c=10.659(2) Å, =106.25(2)°, =93.90(2)°, =98.92(2)°, V=813.1(3) ų, Z=2, R= 0.0474) and [Pt^IV(OOCEt)₃(OH)(dmpda)] (monoclinic P2₁/c, a=12.777(4) Å, b=10.514(2) Å, c=14.971(3) Å, =107.40(2)°, V=1919.2(8) ų, Z=4, R=0.0611) show that the hydroxyl group has been selectively positioned at an axial site. The intramolecular hydrogen bond between the OH and C=O moiety exists (O(H)...=C, 2.83 Å for [Pt^IV(OOCMe)₃(OH)(dmpda)] · H₂O; 2.72 Å for [Pt^IV(OOCEt)₃(OH)(dmpda)]. Formation of the axial-mono(hydroxo)tris(carboxylato)platinum(IV) species may be ascribed to a combination of `reactive-equatorial effects' with `cis-addition' in the carboxylic acid.