Thermal studies on metal complexes of 5-nitroso-pyrimidine derivatives

The following cadmium(II) complexes of deprotonated 6-amino-5-nitroso-uracil (AH), deprotonated 6-amino-3-methyl-5-nitroso-uracil (BH) and neutral 6-amino-1-methyl-5--nitroso-uracil (CH) have been prepared and their thermal behaviour studied by TG and DSC techniques: CdA₂ · 3 H₂O, CdB₂ · 2 H₂O, CdB₂ and CdCl₂(CH)₂ · 2 H₂O.Dehydration processes of these complexes take place in only one step and the enthalpy values associated with them are comprised in the 42.7–80.5 kJ · mole^–1 H₂O range. The pyrolytic reactions finish in the 630–900 C temperature range, remaining as final residue in the case of CdA₂ · 3 H₂O, CdB₂ · 2 H₂O and CdB₂ complexes, cadmium oxide. The pyrolytic decomposition of CdCl₂(CH)₂ · 2 H₂O complex does not yield any residue, due to the elimination of cadmium chloride.

---

Zusammenfassung Folgende Cadmium(II)-Komplexe von deprotoniertem 6-Amino-5-nitrosouracil (AH), deprotoniertem 6-Amino-3-methyl-5-nitroso-uracil (BH) und neutralem 6-Amino-1-methyl-5-nitroso-uracil (CH) wurden hergestellt: CdA₂ · 3 H₂O, CdB₂· 2 H₂O, CdB₂ und CdCl₂(CH)₂ · 2 H₂O. Das thermische Verhalten dieser Komplexe wurde mittels TG und DSC untersucht. Die Dehydratisierung der Komplexe verlÄuft in nur einem Schritt. Die Enthalpiewerte für diese Prozesse liegen im Bereich von 42.7–80.5 kJ · mol^–1 H₂O. Die pyrolytischen Reaktionen verlaufen im Temperaturbereich von 630–900C zu Ende, wobei im Falle der Komplexe CdA₂ · 3 H₂O, CdB₂ · 2 H₂O und CdB₂ Cadmiumoxid als Rückstand zurückbleibt. Die pyroytische Zersetzung von CdCl₂(CH)₂ · 2 H₂O verlÄuft wegen der Flüchtigkeit von CdCl₂ rückstandslos.

---

CdA₂ · 3 H₂O, CdB₂ · 2 H₂O, CdB₂ CdCl₂(CH)₂ · 2 H₂O, A — 6--5-, B — 6--3--5- CH — 6--1--5- . . 42.7–80.5 · ^–1. 630–900, . CdCl₂(CH)₂ · 2 H₂O - , .

     

Ab initio analytical potential energy surface and quasiclassical trajectory study of the O(+)((4)S)+H(2)(X (1)Sigma(g) (+))-->OH(+)(X (3)Sigma(-))+H((2)S) reaction and isotopic variants

An analytical potential energy surface (PES) representation of the O(+)((4)S)+H(2)(X (1)Sigma(g) (+)) system was developed by fitting around 600 CCSD(T)/cc-pVQZ ab initio points. Rate constant calculations for this reaction and its isotopic variants (D(2) and HD) were performed using the quasiclassical trajectory (QCT) method, obtaining a good agreement with experimental data. Calculations conducted to determine the cross section of the title reaction, considering collision energies (E(T)) below 0.3 eV, also led to good accord with experiments. This PES appears to be suitable for kinetics and dynamics studies. Moreover, the QCT results show that, although the hypotheses of a widely used capture model are not satisfied, the resulting expression for the cross section can be applied within a suitable E(T) interval, due to errors cancellation. This could be a general situation regarding the application of this simple model to ion-molecule processes.     

Semiautomatic and automatic catalytic amperometric and catalytic constant-current potentiometric titrations of gold(III)

Semiautomatic and automatic amperometry and constant-current potentiometry were used to follow the course of catalytic titration of gold(III) with potassium iodide. The Ce(IV)-As(III) system in the presence of sulfuric acid was used as the indicator reaction. The possibilities of the application of two types of graphite electrodes were investigated. The effect of concentration of the indicator reaction components, and the presence of organic solvents and acids on the shape of the catalytic titration curves was studied. Amounts of 80–900 μg of gold(III) were determined with a relative standard deviation less than 1.1%. The results obtained are in good agreement with those of comparable methods.     

Pyrolysis Analysis and Kinetics of Crude Oils

This research presents the results of an experimental study on the determination of pyrolysis behaviour and kinetics of six crude oils by differential scanning calorimetry (DSC) and thermogravimetry (TG/DTG). Crude oil pyrolysis indicated two main temperature ranges where loss of mass was observed. The first region between ambient to 400°C was distillation. The second region between 400 and 600°C was visbreaking and thermal cracking. Arrhenius-type kinetic model is used to determine the kinetic parameters of crude oils studied. It was observed that as crude oils gets heavier (°API decreases) cracking activation energy increases. Activation energy of cracking also show a general trend with asphaltene content. This revised version was published online in July 2006 with corrections to the Cover Date.     

Coulometrische Titanbestimmung mit dreiwertigem Eisen

Zusammenfassung Es wurde eine coulometrische ferrimetrische Bestimmung von sehr kleinen Titanmengen nach der Reduktion mit zweiwertigem Chrom beschrieben. Bei 40 C und Anwesenheit von Chloriden ist es möglich, noch 5 g Ti in einer 20 ml-Probe mit einer Genauigkeit von etwa ±2% rel. zu bestimmen. Es wurde der Anteil der primÄren Oxydation von dreiwertigem Titan an der Anode wÄhrend der Titration verfolgt; bei den gelÄufigen Analysen bewegt sich die Generatorstrom-Ausbeute des dreiwertigen Eisens zwischen etwa 85 und 100%. Die Ursache der früher erwÄhnten [4] Störung durch Vanadium besteht in einer zu langsamen Gleichgewichtseinteilung zwischen zweiwertigem Vanadium, das bei der Reduktion von höherwertigen Vanadiumverbindungen durch zweiwertiges Chrom quantitativ gebildet wird, und vierwertigem Titan. Die Erhöhung der Arbeitstemperatur auf 60 C ermöglicht, Titan auch bei gro\em Vanadiumüberschu\ mit der gleichen Genauigkeit wie bei Abwesenheit von Vanadium zu bestimmen.

---

Summary The coulometric ferrimetric determination of very small amounts of titanium after reduction with bivalent chromium is described. In chloride medium at 40 C it is possible to determine 5 g of titanium in a 20 ml sample with an accuracy of about 2% rel. The extent of the primary oxidation of trivalent titanium at the anode was studied in the course of the titrations. In actual analysis the generating efficiency of the trivalent iron is in the range of 85 to 100% The interference of vanadium observed previously [4] is due to a slow establishment of equilibrium between bivalent vanadium and tetravalent titanium. A quantitative reduction of trivalent vanadium by means of bivalent chromium was observed. When increasing the working temperatur to 60 C, it is possible to determine titanium even in great excess of vanadium with an accuracy corresponding to that obtainable in the absence of vanadium.

     

Global optimization of ionic Mg(n)F(2n) (n=1-30) clusters

The global optimization basin-hopping (BH) method has been used to locate the global minima (GM) of Mg(n)F(2n) (n=1-30) clusters using a Born-Mayer-type potential. Some of the GM were particularly difficult to find, requiring more than 1.5 x 10(4) BH steps. We have found that both the binding energy per MgF2 unit and the effective volume of the GM isomers increase almost linearly with n, and that cluster symmetry decreases with cluster size. The data derived from the BH runs reveal a growing density of local minima just above the GM as n increases. Despite this, the attraction basin around each GM is relatively large, since after all their atomic coordinates are randomly displaced by values as high as 2.0 bohrs, the perturbed structures, upon reoptimization, relax back to the GM in more than 50% of the cases (except for n=10 and 11). The relative stabilities derived from energy second differences suggest that n=8,10,13,15, and 20 are probably the magic numbers for these systems. Mass spectrum experiments would be very useful to clarify this issue.     

Screening the origin and weathering of oil slicks by attenuated total reflectance mid-IR spectrometry

The combination of attenuated total reflectance-fourier transform mid-infrared spectrometry (ATR-FTMIR) and multivariate pattern recognition is presented as a fast and convenient methodology to ascertain the source product an oil slick comes from and to evaluate the extent of its weathering. Different types of hydrocarbons (including crude oils, several heavy distillates and the Prestige's heavy fuel oil) were spilled on metallic containers designed ad hoc and their fate monitored by ATR-FTMIR. Not only environmental conditions were considered for weathering but artificial IR- and UV-irradiation. Pattern-recognition studies revealed that the different hydrocarbons clustered at different locations on the score plots and that the samples corresponding to each oil became ordered according to the extent of their weathering. Among them, fuel oil samples coming from the recent disaster of the Prestige tanker off the Galician shoreline showed a distinctive behaviour. Comparison of natural-, IR- and UV-weathering of a crude oil showed that IR solar radiation can be important in oil-weathering, in addition to broadly-reported UV degradation.     

Tandem on-line continuous separation and determination of arsenic by inductively coupled plasma atomic emission spectrometry

The principle of tandem on-line continuous separation techniques as an alternative means of introducing samples into plasmas was applied to the development of a sensitive, selective and convenient method for the determination of arsenic by inductively coupled plasma atomic emission spectrometry (ICP-AES). Arsenic is continuously extracted as AsI₃ into xylene from the sample dissolved in 0.1 M potassium iodide solution in 7.2 M hydrochloric acid. The xylene phase (containing the analyte) is continuously mixed on-line with NaBH₄ in dimethylformamide and acetic acid solutions. Arsine is thus continuously generated directly from the organic phase and is separated in a gas—liquid separation device which prevents most of the xylene phase vapour from reaching the ICP. The system was optimized for the continuous extraction of AsI₃, the direct generation of arsine from xylene and the final ICP determination of arsenic. Finally, the tandem on-line continuous separation ICP detection system was applied to the determination of arsenic in real samples (white metal, cast iron, cupro-nickel and orchard leaves standard materials). Very good agreement between the experimental results and the certified values was obtained.     

Toward designing molecular-electronics devices: A potential significance of highly mobile equilibrium interconversions

Possible applications of computational molecular-engineering approaches to the design of bistable conformational systems, to be potentially employed in molecular electronics, have been analyzed in isomeric–thermodynamic terms. Constructing such systems led to (conflicting) requirements, viz. an easy interconversion of the two structures (the isomerization equilibrium constant close to unity). At the same time there is a need for both isomers to be sufficiently stable and mutually different (enthalpy–entropy compensation can still ensure the equilibrium-constant requirement). Moreover, the equilibrium criteria have to be necessarily combined with considerations of kinetics. The design problems are illustrated on two model systems: Si₆H₆ isomeric species and deuterium- and hydrogen-bonded water dimers, HOD · OHD and DOH · OHD, respectively.     

Gas phase intramolecular proton transfer in cationized glycine and chlorine substituted derivatives (M-Gly, M = Na+, Mg2+, Cu+, Ni+, and Cu2+): existence of Zwitterionic structures?

The intramolecular proton transfer in cationized glycine and chlorine substituted derivatives with M = Na+, Mg2+, Ni+, Cu+, and Cu2+ has been studied with the three parameter B3LYP density functional method. The coordination of metal cations to the oxygens of the carboxylic group of glycine stabilizes the zwitterionic structure. For all monocations the intramolecular proton transfer occurs readily with small energy barriers (1-2 kcalmol(-1)). For the dication Mg2+ and Cu2+ systems, the zwitterionic structure becomes very stable. However, whereas for Mg2+, the proton transfer process takes place spontaneously, for Cu2+ the reaction occurs with an important energy barrier. The substitution of the hydrogens of the amino group by chlorine atoms decreases the basicity of nitrogen, which destabilizes the zwitterionic structure. For monosubstituted glycine complexed with Na+, the zwitterionic structure still exists as a minimum, but for disubstituted glycine no minimum appears for this structure. In contrast, for Mg2+ complexed to mono- and disubstituted glycine, the zwitterionic structure remains the only minimum, since the enhanced electrostatic interaction with the dication overcomes the destabilizing effect of the chlorine atoms.