The effect of rib shape on the behavior of laminar flow of oil/MWCNT nanofluid in a rectangular microchannel

Journal of Thermal Analysis and Calorimetry - In this research, the laminar and forced flow and heat transfer of oil/multi-walled carbon nanotubes nanofluid in a microchannel have been numerically...     

Simple and mild procedures for synthesis of benzimidazole derivatives using heterogeneous catalyst systems

TsOH/graphite and N,N‐dimethylaniline/graphite were found to be catalyst systems for condensation reaction of o‐phenylendiamine with different aldehydes to form benzimidazole derivatives under mild and simple conditions. The graphite was easily recovered by a simple extraction and could be reused without decrease of activity in the presence of fresh TsOH and N,N‐dimethylaniline.     

甲醇制丙烯:最重要的催化剂及其性能

由于世界范围内原油缺乏和丙烯需求量增长,在甲醇转化制烃类的不同路线中,甲醇制丙烯(MTP)过程得到发展.本文讨论了催化剂结构对MTP工艺条件的影响以及分子筛酸性、晶粒尺寸、中孔特性和拓扑结构等因素对催化剂催化MTP反应活性和选择性的影响.     

Cr(VI) ion removal from artificial waste water using supported liquid membrane

In this study, a novel flat-type synergic-supported liquid membrane was evaluated with a mixture of N-methyl-N,N,N-trioctylammonium chloride (Aliquat 336) and tributyl phosphate (TBP) as the carrier and kerosene as the diluent to remove Cr(VI) from synthetic waste water. The main parameters involved in the process were identified and optimised. The parameters were divided into two groups, those that were independent and those having an interaction. The parameters of the carrier/kerosene volumetric proportion and stirring rate were optimised individually due to their nature. The optimal values of these parameters were 0.5 and 500 min^?1, respectively, for a constant carrier/kerosene ratio and stirring rate in the designed experiments using the response surface method (RSM). The four parameters of TBP/Aliquat 336, chromium concentration in the feed phase, feed and product pH were optimised using RSM; it was observed that the TBP/Aliquat 336 ratio, feed pH, pH of the stripping phase and interaction of this parameter with feed concentration have the most important effects on the removal of Cr(VI). The optimal levels of these parameters were 0.61, 71.75 mg L^?1, 3.5 and 12.66 for the ratio of TBP/Aliquat 336, feed chromium concentration, pH of the feed and pH of the product, respectively. An experimental removal rate of 94.63 % at the optimized levels was obtained.     

Study of the surface properties and surface concentration of ionic liquid–alcohol mixtures

Surface properties for three binary mixtures containing a 1-butyl-3-methylimidazolium thiocyanate ([BMIM][SCN]) and a long-chain alcohol (1-butanol, 1-pentanol and 1-hexanol) were determined by surface tension data at the following temperatures: (298.15, 308.15, 318.15, 328.15 and 338.15) K. The surface tension data over the entire mole fraction range are correlated by the Fu et al.(FLW) and Myers-Scott (MS) models. There is good agreement between the experimental data and the results of correlations for 15 binary systems (the three systems at five temperatures) with an average relative error below 1.5%. In addition, the UNIFAC group contribution method is applied for calculation of activity coefficients of components in solution. Moreover, the relative adsorptions of alcohol at the air/liquid interface are determined using Gibbs adsorption isotherm. The obtained results show that the values of adsorption for mixtures of alcohols/[BMIM][SCN] increase with increasing the alkyl chain length of alcohol and decreasing temperature.     

Macrocyclic beta-sheet peptides that mimic protein quaternary structure through intermolecular beta-sheet interactions

This paper reports the design, synthesis, and characterization of a family of cyclic peptides that mimic protein quaternary structure through beta-sheet interactions. These peptides are 54-membered-ring macrocycles comprising an extended heptapeptide beta-strand, two Hao beta-strand mimics [JACS 2000, 122, 7654] joined by one additional alpha-amino acid, and two delta-linked ornithine beta-turn mimics [JACS 2003, 125, 876]. Peptide 3a, as the representative of these cyclic peptides, contains a heptapeptide sequence (TSFTYTS) adapted from the dimerization interface of protein NuG2 [PDB ID: 1mio]. 1H NMR studies of aqueous solutions of peptide 3a show a partially folded monomer in slow exchange with a strongly folded oligomer. NOE studies clearly show that the peptide self-associates through edge-to-edge beta-sheet dimerization. Pulsed-field gradient (PFG) NMR diffusion coefficient measurements and analytical ultracentrifugation (AUC) studies establish that the oligomer is a tetramer. Collectively, these experiments suggest a model in which cyclic peptide 3a oligomerizes to form a dimer of beta-sheet dimers. In this tetrameric beta-sheet sandwich, the macrocyclic peptide 3a is folded to form a beta-sheet, the beta-sheet is dimerized through edge-to-edge interactions, and this dimer is further dimerized through hydrophobic face-to-face interactions involving the Phe and Tyr groups. Further studies of peptides 3b-3n, which are homologues of peptide 3a with 1-6 variations in the heptapeptide sequence, elucidate the importance of the heptapeptide sequence in the folding and oligomerization of this family of cyclic peptides. Studies of peptides 3b-3g show that aromatic residues across from Hao improve folding of the peptide, while studies of peptides 3h-3n indicate that hydrophobic residues at positions R3 and R5 of the heptapeptide sequence are important in oligomerization.     

Refinement of the primary hydration shell model for molecular dynamics simulations of large proteins

A realistic representation of water molecules is important in molecular dynamics simulation of proteins. However, the standard method of solvating biomolecules, that is, immersing them in a box of water with periodic boundary conditions, is computationally expensive. The primary hydration shell (PHS) method, developed more than a decade ago and implemented in CHARMM, uses only a thin shell of water around the system of interest, and so greatly reduces the computational cost of simulations. Applying the PHS method, especially to larger proteins, revealed that further optimization and a partial reworking was required and here we present several improvements to its performance. The model is applied to systems with different sizes, and both water and protein behaviors are compared with those observed in standard simulations with periodic boundary conditions and, in some cases, with experimental data. The advantages of the modified PHS method over its original implementation are clearly apparent when it is applied to simulating the 82 kDa protein Malate Synthase G. © 2009 Wiley Periodicals, Inc. J Comput Chem 2009     

Artificial neural network for quantitative determination of total protein in yogurt by infrared spectrometry

A method has been introduced for quantitative determination of protein content in yogurt samples based on the characteristic absorbance of protein in 1800-1500 cm^− 1 spectral region by mid-FTIR spectroscopy and chemometrics. Successive Projection Algorithm (SPA) wavelength selection procedure, coupled with feed forward Back-Propagation Artificial Neural Network (BP-ANN) model was the benefited chemometric technique. Relative Error of Prediction (REP) in BP-ANN and SPA-BP-ANN methods for training set was 7.25 and 3.70 respectively. Considering the complexity of the sample, the ANN model was found to be reliable, while the proposed method is rapid and simple, without any sample preparation step.     

Solid‐state synthesis of a new core–shell nanocomposite of polyaniline and silica via oxidation of aniline hydrochloride by FeCl3.6H2O

Among the different oxidants used for the preparation of polyaniline in the solid‐state, iron (III) chloride (FeCl₃.6H₂O) can act as both oxidant and dopant. This work reports the synthesis and characterization of novel composite of polyaniline/silica. The polymerization was performed by oxidative polymerization of aniline hydrochloride in the presence of silica and FeCl₃.6H₂O under solid‐state (solvent‐free) condition. The FeCl₃.6H₂O has been chemically supported on silica and generated silica‐supported FeCl₃ ( SSFe ), which plays three important roles simultaneously (a) oxidant, (b) primary dopant, and (c) secondary dopant (Lewis acid). Furthermore, the existence of silica is important for proceeding of polymerization in solid state. In the other words, the surface polymerization and green chemistry in solid state have been coupled. The characterization and doping process are verified by ultraviolet‐visible, Fourier transform infrared, atomic absorption spectroscopy, thermogravimetric analysis, differential scanning calorimetry, and elemental analysis (CHNS). From atomic absorption spectroscopy the ratio of Fe/N in the composite obtained about 1, which confirms the formation of delocalized polarons by SSFe in the composites. The conductivity is in the range of semi‐conductive. Furthermore, contact resistance was determined by circular‐transmission line measurement. According to scanning electron microscopy images silica particles have been thoroughly coated by polyaniline within the range of 0.2 to 1 µm. However, transition electron microscopy images depict the uniform solid nanospheres (no hollow spheres or fibers), and their mean diameters are under of 50 nm. It confirms nanocomposite of core–shell PANI‐SSFe. Copyright © 2016 John Wiley & Sons, Ltd.     

Phonon-dependent transport through a serially coupled double quantum dot system

Using Keldysh nonequilibrium Green function formalism and mapping a many-body electron–phonon interaction onto a one body problem, the electron transport through a serially coupled double quantum dot system is analyzed. The influence of the electron–phonon interaction, temperature, detuning, and interdot tunneling on the transmission coefficient and current is studied. Our results show that the electron–phonon interaction results in the appearance of the side peaks in the transmission coefficient, whose height is strongly dependent on the phonon temperature. We have also found that the inequality of the electron–phonon interaction strength in two dots gives rise to an asymmetry in the current–voltage characteristic. In addition, the temperature difference between the phonon and electron subsystems results in the reduction of the saturated current and the destruction of the step-like behavior of the current. It is also observed that the detuning can improve the magnitude of the current by compensating the mismatch of the quantum dots energy levels induced by the electron–phonon interaction.